This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
- TwistedTwigleg
8aa3c2f091
Primary and secondary handles are no longer differentiated by their ids, so a bool was added to tell them apart in all the handle-related methods.
Includes a minor fix in CollisionPolygon3DEditor, unrelated to editor gizmos.
- JFonS
5ebea2d120
* Fixed subgizmo editing on scaled nodes.
* Added more clarifications on the coordinate space of subgizmos.
* Given input priority to the transform gizmo over subgizmo selection.
- JFonS
d7b58ebc9c
* Clean-up of node_3d_editor_plugin.{h,cpp}: removed unused code, fixed some bugs.
* Moved node_3d_editor_gizmos.{h,cpp} to editor/plugins.
* Added support for multiple gizmos per node. This means custom gizmos will no longer override the built-in ones and that multiple gizmos can be used in more complex nodes.
* Added support for handle IDs. When adding handles to a gizmo, an ID can be specified for each one, making it easier to work with gizmos that have a variable number of handles.
* Added support for subgizmos, selectable elements that can be transformed without needing a node of their own. By overriding _subgizmo_intersect_frustum() and/or _subgizmo_intersect_ray() gizmos can define which subgizmos should be selected on a region or click selection. Subgizmo transformations are applied using get/set/commit virtual methods, similar to how handles work.
- JFonS
cfb555a081
- Note: MeshDataResourceEditor is now kind of painful to use, it will be fixed a bit later.
This PR and commit adds a new IK system for 3D with the Skeleton3D node
that adds several new IK solvers, as well as additional changes and functionality
for making bone manipulation in Godot easier.
This work was sponsored by GSoC 2020 and TwistedTwigleg
Full list of changes:
* Adds a SkeletonModification3D resource
* This resource is the base where all IK code is written and executed
* Adds a SkeletonModificationStack3D resource
* This node oversees the execution of the modifications and acts as a bridge of sorts for the modifications to the Skeleton3D node
* Adds SkeletonModification3D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in it's own file
* Several changes to Skeletons, listed below:
* Added local_pose_override, which acts just like global_pose_override but keeps bone-child relationships intract
* So if you move a bone using local_pose_override, all of the bones that are children will also be moved. This is different than global_pose_override, which only affects the individual bone
* Internally bones keep track of their children. This removes the need of a processing list, makes it possible to update just a few select bones at a time, and makes it easier to traverse down the bone chain
* Additional functions added for converting from world transform to global poses, global poses to local poses, and all the same changes but backwards (local to global, global to world). This makes it much easier to work with bone transforms without needing to think too much about how to convert them.
* New signal added, bone_pose_changed, that can be used to tell if a specific bone changed its transform. Needed for BoneAttachment3D
* Added functions for getting the forward position of a bone
* BoneAttachment3D node refactored heavily
* BoneAttachment3D node is now completely standalone in its functionality.
* This makes the code easier and less interconnected, as well as allowing them to function properly without being direct children of Skeleton3D nodes
* BoneAttachment3D now can be set either using the index or the bone name.
* BoneAttachment3D nodes can now set the bone transform instead of just following it. This is disabled by default for compatibility
* BoneAttachment3D now shows a warning when not configured correctly
* Added rotate_to_align function in Basis
* Added class reference documentation for all changes
- TwistedTwigleg
5ffed49907
Note: It still needs some work.
* Added helper functions to Skeleton3D for converting transforms from bone space to global space, and vice versa.
* Updated the Skeleton3D class reference.
* Changed the icon used for bones in the Skeleton3D inspector to use BoneAttachement3D's icon.
* Changed the Skeleton3D inspector to use EditorPropertyTransform and EditorPropertyVector3 when possible.
* Placed the Transform/Matrix for each bone in a sub-section, so it is visually similar to the Node3D inspector.
- TwistedTwigleg
24905becb2
- Also fixed smaller issues.
ec19ed3723
Its a bit broken right now, more patches need to be ported. Also I kept the Transform track for now, and I did not touch the gltf module yet.
This fixes an issue with visual scripts spamming error messages
in the editor when running the project with the remote scene tree
visible.
(cherry picked from commit 829c8247559a21d0b6f540e4a548d935c3a24643)
Selecting nodes in the Scene dock automatically switches to the relevant 2D
or 3D viewport. This behavior can be annoying while using the Script Editor
and wanting to inspect node properties, so it's now disabled by default when
the Script Editor is active.
This new behavior can be changed back to the previous auto-switching using
the `text_editor/navigation/stay_in_script_editor_on_node_selected` editor
setting.
(cherry picked from commit c4433c37932aca14b45e76a0b3498561532a0055)
This expands uppon #60708, using `get_node("%NodeName")` for nodes that
have a unique scene name to avoid having to change the onready
statements when the paths of the nodes change.
- Jummit
63f35d24c6
Having a mix of settings with and without subcategory makes the 'Editor'
section stand out with a weird UX, as instead of simply being a foldable
section like the others, it also holds its own top-level settings and is
therefore selectable.
This wasn't the case in 3.4, and is fixed in 4.0 by refactoring, so for
3.5 we should preserve the 3.4 UX, even if it's not the best.
- akien-mga
acd4a01b8c
Backports features and bugfixes from current Godot 4.0 to 3.5 and brings functions and codebase of both version largely in sync to make tutorials more compatible and future backports easier.
- smix8
8bd7c6188b
Fixed UI bug where it appeared that pushing the up or down incrementing
arrows did not increment the SpinBox value appropriately. Just needed
to increase the size of the box horizontally, to display four decimal
points consistently.
(cherry picked from commit 09658f7e3ba7ffc87ae9f90aa42f64dfeeb33f40)
When populating a MultimeshInstance (node), Godot would set the
new Multimesh's color and custom data format as the current node's
multimesh, which would cause a crash if node's multimesh is null.
Populate Function will now check if node has a multimesh or not, and
set the new multimesh with default (NONE) values if node's multimesh is
null.
Fixes Issue #61553
The new default value (1800) allows storing 30 seconds of profiling
at 60 FPS.
The new maximum value (10000) allows storing about 3 minutes of
profiling at 60 FPS.
The profiler graph will scale accordingly to the chosen setting,
so the default value is kept relatively low to prevent the graph
from looking too squished on narrow displays.
The call to draw the handles in the OccluderPoly was spamming errors when the hole has no points. This PR prevents trying to draw the gizmo for the hole when there are no points, which prevents the spam.
