Andreas Falkenhahn
My app opens a 640x480 window. When I click on the window's maximize button, the window correctly fills the entire screen and loses its borders. But clicking on the restore button now doesn't restore the window to its original 640x480 size. Instead, the window size is identical to the screen size now. The only difference to the previous state is that the window now has borders again but it isn't restored to 640x480.
bastien.bouclet
The window is now resized to its specified size, but it moves to the top left corner of the screen. That is unexpected because neither the user nor the program moved it there. Test program attached (the same one as before).
Andreas Falkenhahn
When compiling SDL for the Raspberry Pi, I have to use the --host parameter to enable compilation of the native Raspberry Pi video driver, like so:
--host=arm-raspberry-linux-gnueabihf
It took me a while to figure out that this was necessary in order to have the native Raspberry Pi video driver compiled in. I think it would be better if there was an option like --enable-video-rpi that could be passed to configure and that would also show up when saying configure --help. Currently, it?s rather difficult to figure out that you have to use the --host parameter with arm-raspberry-linux-gnueabihf in order to get Raspberry Pi video support. It?s also somewhat inconsistent because most other video drivers can in fact be enabled/disabled through specific configure parameters but there is no such parameter for the native Raspberry Pi video driver.
Simon Hug
These are the remaining compiler warnings I see in the current tip cb049cae7c3c.
- SDL_test_log.c defines _CRT_SECURE_NO_WARNINGS without checking if it was already set.
- SDL_windowskeyboard.c converts integers to pointers without going over the (U)INT_PTR types. That bothers MSVC.
Now we try the new (hardware-specific) pathnames first, and if those fail to
load, we'll try the more generic names that earlier versions of Raspbian used.
Fixes Bugzilla #3800.
Mart?n Golini
I'm having a very slow initialization of the video subsystem that locks the window creation for about 500 ms ( tested in at least 4 different systems ). What i found is that X11_InitModes_XRandR is using XRRGetScreenResources, that explicitly ask to poll the hardware for changes. This is not really necessary since if the data is already available you can use XRRGetScreenResourcesCurrent.
I attached a tentative patch that fix this issue. With the patch there's no lock when the subsystem is initialized and the window creation is instant in my applications. The patch only uses XRRGetScreenResourcesCurrent in X11_InitModes_XRandR but it could be potentially used in X11_GetDisplayModes and X11_SetDisplayMode.
bastien.bouclet
When creating two surfaces and blitting them onto the other, SDL's internal reference counting fails, and one of the surfaces is not freed when calling SDL_FreeSurface.
Example code :
SDL_Surface *s1 = SDL_CreateRGBSurfaceWithFormat(0, 640, 480, 32, SDL_PIXELFORMAT_ARGB8888);
SDL_Surface *s2 = SDL_CreateRGBSurfaceWithFormat(0, 640, 480, 32, SDL_PIXELFORMAT_ARGB8888);
SDL_BlitSurface(s1, NULL, s2, NULL);
SDL_BlitSurface(s2, NULL, s1, NULL);
SDL_FreeSurface(s2);
SDL_FreeSurface(s1);
With this example, s1 is not freed after calling SDL_FreeSurface, its refcount attribute is still positive.
This also seems to fix the follow-up issue in bug #3719, whereby the initial fix caused the SDL window to move, after transitioning from fullscreen to windowed-mode
This is necessary because the Raspberry Pi is a strange beast, that believes
it has OpenGL support (through glX?) but generally has GLES2 support.
So when using the raspberry video target, we need to force this to default
to a GLES2 context, or by default SDL_CreateWindow() will fail, deep down
when it tries to load the proper GL library.
Fixes testsprite2 (and basically everything else that wasn't testgles2) when
run on a Raspberry Pi without a X server.
Please note that other targets might also need this filled in, the Raspberry
Pi is just the most prominent and readily-available System-On-A-Chip style
thing on my desk. :)
Romain Tisserand
Using KMS/DRM driver from WIP SDL2.0.6 on Linux/ARM SoC RockChip RK3328 (ARM Mali 450 MP2 GPU).
The current code is using GBM_BO_FORMAT_XRGB8888 as GBM buffer format specifier.
The Mali driver (it has been confirmed some other vendor implementations too) expects GBM_FORMAT_XRGB8888.
The Mesa implementation is actually handling both values as the same, but it's not implemented like this into every gbm.h vendor header.
https://github.com/ideak/mesa/blob/master/src/gbm/backends/dri/gbm_dri.c
So with stock SDL2 on my card (Mali vendor implementation), it does not work, eglCreateWindowSurface fails, and gbm_is_format_supported fails too (with the BO variant).
It runs fine with GBM_FORMAT_XRGB8888.
Here is a link of the gbm.h from Mali user-space driver :
https://github.com/rockchip-linux/libmali/blob/rockchip/include/gbm.h
This is necessary because we need to see if GLES compat extensions exist.
All of this code (including ShouldUseTextureFramebuffer()) should be
revisited after 2.0.6 ships; ideally we don't make throwaway contexts if
we can avoid it...but maybe we can't. I hear Vulkan is pretty cool.
Fixes Bugzilla #3725.
Colin Barrett
Using the pre-built x86 devel libs from here:
https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip
If I have:
SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG);
and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created.
Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't.
Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect
bastien.bouclet
When exiting a "fullscreen space" on OS X, windows don't go to their defined "windowed mode size", but go back to their previous size.
Steps to reproduce:
1. Create a windowed mode SDL window
2. Toggle it to fullscreen with the SDL_WINDOW_FULLSCREEN_DESKTOP flag
3. While in fullscreen, change the windowed mode size using SDL_SetWindowSize
4. Toggle the window back to windowed mode
Expected result:
- The window has the size specified during step 3.
Actual result:
- The window has the size specified when creating the window in step 1.
Attached is a minimal reproduction test case.
The attached test case works as expected on X11 and Windows.
Ozkan Sezer
fix windows build after revision 11382: commit 2026e42e377a renamed
_SDL_msctf_h to SDL_msctf_h_ . SDL_windowskeyboard.c relies on that
macro, so update it accordingly.
Ozkan Sezer
Since the Vulkan merge, building against a Mac OS X SDM older than
10.11 fails in SDL_cocoametalview.m because Metal.framework is not
present. There is no conditional compiling in SDL_cocoametalview.m
either, so --disable-video-vulkan doesn't help with anything. (The
configury doesn't check darwin for x86_64 either, but it's another
story.)
I cross-build against 10.8 SDK on linux using clang-3.4.2 and this
is a problem for me. Will this be fixed?
Clayton Craft
The default path used by directfb for libGL is different than the default path used by x11 in SDL2:
./src/video/directfb/SDL_DirectFB_opengl.c:
path = "libGL.so";
./src/video/x11/SDL_x11opengl.c:
#define DEFAULT_OPENGL "libGL.so.1"
On at least one distro (Alpine Linux), libGL.so is not created (or more accurately the symlink to libGL.so.1 is not created). For consistency, the 'path' variable in SDL_DirectFB_opengl.c should patch the DEFAULT_OPENGL in SDL_x11opengl.c ("libGL.so.1")
Error message was:
[mvk-info] MoltenVK version 0.18.2. Vulkan version 1.0.51.
[***MoltenVK ERROR***] VK_ERROR_INITIALIZATION_FAILED: On-screen rendering requires a view that is backed by a layer of type CAMetalLayer.
2017-08-28 02:17:29.579 testvulkan[95627:1716939] ERROR: SDL_Vulkan_CreateSurface(): vkCreateMacOSSurfaceMVK failed: VK_ERROR_INITIALIZATION_FAILED
Carlos
We would like to add a switch (define) that allows us to compile Angle statically with SDL. That is, getting rid of the OpenGL DLL. Usually you need OpenGL to be loaded dynamically as DLL because implementation is provided by the system but no need with Angle.
Only 2 files need modification and it shouldn't affect current behaivor:
include/SDL_egl.h and src/video/SDL_egl.c, as in here
https://github.com/native-toolkit/sdl/pull/10/files
The flag name could be SDL_VIDEO_STATIC_ANGLE (instead of NATIVE_TOOLKIT_STATIC_ANGLE) as discussed here https://github.com/native-toolkit/sdl/pull/10
We have tested this with both Windows and UWP, using NME engine (https://github.com/haxenme/nme).
Releated issue: https://bugzilla.libsdl.org/show_bug.cgi?id=1820
This fixes a strange corner case (notes appended below), and should be
safe to do anyhow.
Fixes Bugzilla #3674.
"I did more tests.
It appears the bug only happens if there is
another window on the screen that has "always
on top" property. For me it is xawtv - it is
always opened in a screen corner. Closing
xawtv or removing "always on top" property
from it makes the problem to go away.
Plus, it doesn't appear like the buttons are
not delivered at all. It appears that instead
the button presses are delivered on some mouse
positions, but not delivered when you move the
mouse to other part of the window... So this is
really weird and is likely somewhere deep in the
Xorg.
Maybe somehow it happens that the cursor is
actually above the xawtv window, but, because
my app uses grab, it is not visible there, and
in that case the events are not delivered to
my app?
But with my patch the button events are
always delivered flawlessly, it seems.
Hmm, and that indeed seems to explain my problem:
if the mask is set properly and my app uses
grab, then, even if the mouse is above some
other window, the events would still be delivered
to the grabbing app, which is what actually wanted
because my app uses relative mouse mode, so it
doesn't know the pointer can cross some other window
(my app draws the pointer itself).
So my current theory is that my patch only enforces
the mouse grab, which otherwise can be tricked by
some other window preventing the button events
delivery (but motion events are still delivered
via xinput2, which makes it all look very obscure)."
This patch was originally written by Marc Di Luzio for glX and enhanced by
Maximilian Malek for WGL, etc. Thanks to both of you!
Fixes Bugzilla #3643.
Fixes Bugzilla #3735.
Pegasus Epsilon
With the system dialog font set to Arial or Tahoma or another variable-width font, everything works just as expected. When using a fixed-width font, like Courier or DejaVu Sans Mono, the text gets cut off. Example screenshots attached.
Martijn Courteaux
I implemented precise scrolling events. I have been through all the folders in /src/video/[platform] to implement where possible. This works on OS X, but I can't speak for others. Build farm will figure that out, I guess. I think this patch should introduce precise scrolling on OS X, Wayland, Mir, Windows, Android, Nacl, Windows RT.
The way I provide precise scrolling events is by adding two float fields to the SDL_MouseWheelScrollEvent datastructure, called "preciseX" and "preciseY". The old integer fields "x" and "y" are still present. The idea is that every platform specific code normalises the scroll amounts and forwards them to the SDL_SendMouseWheel function. It is this function that will now accumulate these (using a static variable, as I have seen how it was implemented in the Windows specific code) and once we hit a unit size, set the traditional integer "x" and "y" fields.
I believe this is pretty solid way of doing it, although I'm not the expert here.
There is also a fix in the patch for a typo recently introduced, that might need to be taken away by the time anybody merges this in. There is also a file in Nacl which I have stripped a horrible amount of trailing whitespaces. (Leave that part out if you want).
manuel.montezelo
Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015
--------------------------------------------------------
Package: libsdl2-2.0-0
Version: 2.0.0+dfsg1-3
Severity: normal
Tags: patch
I have occasional crashes here caused by the X11 backend of SDL2. It seems to
be caused by the X11_Pending function trying to add a high number (> 1024)
file descriptor to a fd_set before doing a select on it to avoid busy waiting
on X11 events. This causes a buffer overflow because the file descriptor is
larger (or equal) than the limit FD_SETSIZE.
Attached is a possible workaround patch.
Please also keep in mind that fd_set are also used in following files which
may have similar problems.
src/audio/bsd/SDL_bsdaudio.c
src/audio/paudio/SDL_paudio.c
src/audio/qsa/SDL_qsa_audio.c
src/audio/sun/SDL_sunaudio.c
src/joystick/linux/SDL_sysjoystick.c
--------------------------------------------------------
On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote:
> I have occasional crashes here caused by the X11 backend of SDL2. It seems
> to be caused by the X11_Pending function trying to add a high number (>
> 1024) file descriptor to a fd_set before doing a select on it to avoid busy
> waiting on X11 events. This causes a buffer overflow because the file
> descriptor is larger (or equal) than the limit FD_SETSIZE.
I personally experienced this problem while hacking on the python bindings
package for SDL2 [1] (while doing make runtest). But it easier to reproduce in
a smaller, synthetic testcase.
Martin Gerhardy
just for easier debugging issues in the own code...
SDL_CreateRenderer should maybe also use this macro
Ryan C. Gordon
I'll go one better: it should have an SDL_assert().
Rainer Deyke
I've written a small patch that adds a small SDL_DuplicateSurface function to SDL. I've written the function as part of a larger (as yet unfinished) patch, but I think this function is useful enough that it merits inclusion in SDL on its own.
Alvin
I'm interested in this bug as well. I have experienced it when trying to embed an SDL_Window into a FLTK application. To do this, I create a FLTK window (window inside a window - think video player) and then use SDL_CreateWindowFrom() on the inner most window's Xlib Window*. After which, I create a renderer.
In my situation I am using the FLTK GUI toolkit.
What I have experienced is that the SDL_CreateRender() will recreate the window in order to properly setup OpenGL capability. As part of this process, the window is hidden and a call is executed that waits indefinitely for an acknowledgement that the window was indeed unmapped. This is where my program hangs.
Please correct me if I am wrong, but should SDL2 not make Xlib calls that effect the Xlib Window in this situation (e.g. When SDL_CreateWindowFrom() is used)? The toolkit being used typically assumes responsibility and, I presume, tracks all Xlib Windows it creates.
On line src/video/SDL_video.c:1372 the comment associated with setting SDL_WINDOW_FOREIGN reads:
/* Can't destroy and re-create foreign windows, hrm */
Since I do not know the reason for hiding the window in the first place, the attached patch simply does not wait for a response when X11_XWithdrawWindow() and X11_XMapRaised() are issued by X11_HideWindow() and X11_ShowWindow(), respectively. I presume that the GUI toolkit (GTK, FLTK, etc.) has or will consume the acknowledging event as it is managing the Xlib Window (or it thinks it is).
I have tested the patch against hg 5c645d037de2 and I have successfully tested:
* Embedding the SDL_Window inside a FLTK application.
* Calling SDL_SetWindowSize() when FLTK resizes the window (e.g. dragging cursor on the edge of the window).
* Filling the renderer's default target blue and drawing a red fill square at the centre (exciting, I know!)
* Calling SDL_Quit() when the application terminates
I do not receive any Xlib erorr messages (BadWindow, etc.) in any of those situations.
Ozkan Sezer
The attached patch removes SDLCALL attribute from SDL_BlitFunc() funcptr.
As far as I can see, *SDL_BlitFunc() is completely internal to SDL with
no specific calling convention requirements. The actual functions assigned
to SDL_BlitFunc seem to not have any calling conventions specified. So,
easy solution is simply removing the strict calling convention from the
type.
Sylvain
Here's a patch.
It tries to get the hint first. Resizable will allow any orientation. Otherwise it uses width/height window.
setOrientation method is splitted in static and non-static, so that it can be overloaded in a user subclass.
Some artefact observed :
surfaceChanged() can be called twice at the beginning. When the phone starts in portrait and run a landscape application.
Clayton Craft
linux_input module is disabled by default, despite the comments in source code that it is otherwise:
src/video/directfb/SDL_DirectFB_video.c:
devdata->use_linux_input = readBoolEnv(DFBENV_USE_LINUX_INPUT, 0); /* default: on */
src/video/directfb/SDL_DirectFB_video.h:
#define DFBENV_USE_LINUX_INPUT "SDL_DIRECTFB_LINUX_INPUT" /* Default: on */
When using the directfb driver, the linux_input module is suppressed unless the SDL app is started with "SDL_DIRECTFB_LINUX_INPUT=1" set in the environment. I recall seeing at one point that the directfb folks recommended using linux_input over the other input drivers, but I am having trouble locating this recommendation. In any case, I believe that this should really be defaulted to 'on' since it's vastly superior to the other dfb input drivers!
Alexey
Seems to be a missing functionality. I want to set an icon from RC file. I cant pass MAKEINTRESOURCE(X) string to SDL_RegisterApp() cause string returned by MAKEINTRESOURCE string is not actually a string and SDL_strlen will crash. Moreover LoadImage seems to be loading wrong icon size. LoadIcon seems to be fine.
Edward Rudd
Device: Logitech Rumble Gamepad F510 in Xinput mode.
Upon opening the joystick the values of the axes are queried via PollAllValues are not actually set on the device all the time.
This can easily be seen in the testjoystick or testgamecontroller test programs,as the testjoystick shows all axes in the center until one 'tickles' the triggers., and the testgamecontroller will show the triggers as 'on' until on 'tickles' the triggers.
Upon further research the culprit is the SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS hint. In the default value events are ignored until there is an active window, Thus in cases where the joystick system is initialized and controllers opened before the initial window is created & focuses, the initial values will be incorrect.
Here is my current workaround in the game I'm working on porting..
SDL_SetHint(SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS, "1");
SDL_GameController* gamepad = SDL_GameControllerOpen(index);
SDL_SetHint(SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS, "0");
Edmund Horner
When a 16-bit "565 format" surface has a colour key set, it will blit with correct transparency. If, however, it has its colour key set then is converted to a 32-bit ARGB format surface, the colour key in the converted image will not necessarily be the same pixel value as the transparent pixels. It may not blit correctly, because the colour key does not match the right pixels.
In my case, with an image using 0xB54A for transparency, the colour key was converted to 180,170,82; but the corresponding pixels (with the same original value) were converted to 180,169,82. Blitting the converted image did not use transparency where expected.
I have attached a test case. The bug has been replicated on both x86_64 Linux (SDL 2.0.2), and 32-bit MS C++ 2010 on Windows (SDL 2.0.0).
malferit
Hello, I began a little program with SDL2 on Linux in C, and when I call SDL_Init(SDL_INIT_VIDEO) I get an error and this is printed in the console:
XDM authorization key matches an existing client!
I searched through Internet, and found that some people suggest to run 'xhost +' or to specify this in /etc/X11/xdm/xdm-config:
DisplayManager*authName: MIT-MAGIC-COOKIE-1
I don't think an end user needs to know that...
But what bothered me is that first I started this little program in Pascal using the Freepascal compiler and it works. In freepascal you only use some thin header bindings in Pascal and then it links with the dynamic SDL library, so I don't understood why it worked with Freepascal and not in C.
I run ldd to the two generated applications:
Application in C:
linux-gate.so.1 (0xffffe000)
libSDL2-2.0.so.0 => /usr/lib/libSDL2-2.0.so.0 (0xb76ac000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb766e000)
libc.so.6 => /lib/libc.so.6 (0xb74e2000)
libm.so.6 => /lib/libm.so.6 (0xb74a0000)
libdl.so.2 => /lib/libdl.so.2 (0xb749a000)
librt.so.1 => /lib/librt.so.1 (0xb7491000)
/lib/ld-linux.so.2 (0xb77b3000)
Application compiled with Freepascal:
linux-gate.so.1 (0xffffe000)
libSDL2-2.0.so.0 => /usr/lib/libSDL2-2.0.so.0 (0xb762a000)
libX11.so.6 => /usr/lib/libX11.so.6 (0xb74f3000)
libc.so.6 => /lib/libc.so.6 (0xb7367000)
libm.so.6 => /lib/libm.so.6 (0xb7325000)
libdl.so.2 => /lib/libdl.so.2 (0xb731f000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb7305000)
librt.so.1 => /lib/librt.so.1 (0xb72fc000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb72dc000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb72d9000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb72d3000)
/lib/ld-linux.so.2 (0xb7755000)
It seems that Freepascal is linking with libX11, libxcb, libXau and libXdmcp .
Linking my C application with libxcb solved the problem (linking with libXau and/or libXdmcp without libxcb didn't work). Linking with X11 links all the other libraries and works as well.
So I fill this bug report mainly to let you know about this. I don't know if it is a problem that can be solved on the libSDL side or not, but at least I hope it will help.
Hi, some tests:
1. Disabled XDM. Login in console and running 'startx'. The program works without having to link with X11.
2. Enabled XDM. Added 'DisplayManager*authName: MIT-MAGIC-COOKIE-1' to /etc/X11/xdm/xdm-config.The program works without having to link with X11.
3. Enabled XDM without 'DisplayManager*authName: MIT-MAGIC-COOKIE-1' in /etc/X11/xdm/xdm-config . I get the authentication error unless I link with X11.
Coriiander
There's a slight mistake in the function "GetWindowStyle" found in file "SDL_windowswindow.c".
When a window is marked to be resizable, the resizable style is being added regardless of whether the window has a border or not. While for some arcane, hidden semantics this can be ok, it's still inconsistent in this case.
Witek Jachimczyk
I'm using SDL to develop a video viewer for MATLAB. The window is scrambled while using thightVNC with its default mode of RGB656.
SDL does not correctly recognize the pixel mode.
I found a solution for this problem. The solution involves modifying
SDL/src/video/SDL_pixels.c
Adding the following "if statement" under case 16: of SDL_MasksToPixelFormatEnum resolves the issue:
if (Rmask == 0x003F &&
Gmask == 0x07C0 &&
Bmask == 0xF800 &&
Amask == 0x0000) {
return SDL_PIXELFORMAT_RGB565;
}
I hope that this helps someone. I took me a while to figure it out.
Yann Dirson
When SDL_GL_GetProcAddress returns in error, the cause of the error is overwritten
in GL_GL_GetAttribute, reporting to the user "Failed getting OpenGL glGetString entry point", whereas the original "OpenGL library not loaded" never makes it
to the user.
Pushed a fix to:
f94cb13708
Note that the "OpenGL library not loaded" error looks like no root cause either,
and I'm still puzzled by the code path used: I'm forcing opengles2 renderer on
the x11 video driver on a rpi2, as in https://bugzilla.libsdl.org/3169, and although I now know that I must force the use of the RPI video driver instead
of the x11 one, I suspect even more accurate info can be given to user.
Sylvain
Let's you have a SDL_Surface that has ColorKey, but no Alpha Modulation.
When this surface is duplicated with SDL_ConvertSurface function, the result has ColorKey and Alpha Modulation (BLEND, and Opaque 255).
I think SDL_ConvertSurface should strictly keeps the input format.
example
=======
SDL_Surface *input; // ... Set up a surface with ColorKey and no AlphaMod
SDL_Surface *output = SDL_ConvertSurface(input, input->format, input->flags);
// "output" surface has a ColorKey but *also* AlphaMod (BLEND, and Opaque 255).
owen
I removed all the static variables from SDLActivity.java
Updated all the SDL_android.c jni calls as well
I added a new function to SDL_android.c/ h
void Android_JNI_SeparateEventsHint(const char* c);
This is called by SDL_androidtouch.c so that this TU doesn't need to call any JNI functions.
Philipp Wiesemann
There is another problem with the current implementation which maybe should be fixed first (to prevent some work). It was written as if it would get the number of a button from the Java side but actually it gets the state of all buttons. That is why it should not work if more than one button is pressed at once.
romain.lacroix
For the windows implementation of SDL_ShowMessageBox() : ./src/video/windows/SDL_windowsmessagebox.c:345 WIN_ShowMessageBox()
The implementation in 2.0.4 uses "button index" for parameter "id" of function AddDialogButton().
It then expects the value provided in param wParam of function MessageBoxDialogProc() to be a valid index of a button.
It uses this value to index in the array of buttons when DialogBoxIndirect() returns (line 474 : *buttonid = buttons[which].buttonid;)
However, when dismissing this box with Escape, the return value of DialogBoxIndirect will be SDL_MESSAGEBOX_BUTTON_ESCAPEKEY_DEFAULT (=2) which is not always a valid index of array buttons.
When the array buttons has a length less or equal than 2, the memory access is invalid; I can see that the value written to *buttonId is uninitialized memory (random value).
The fix I propose : use value "buttonid" (field of button) for parameter "id" of AddDialogButton(), then copy return value of DialogBoxIndirect() in *buttonid. This way, we will not use an out-of-bounds index in array buttons.
Simon Hug
The RGBA_FROM_PIXEL macro in src/video/blit.h [1] is not designed to work with more than 8 bits per channel and the ARGB2101010 format makes it read outside of the array bounds causing access violations. This can happen during blitting with the BlitNtoNPixelAlpha and SDL_Blit_Slow functions.
When SDL_InitFormat tries to calculate the loss of the channels [2], the Uint8 will wrap around and it will end up at 254 for the 10-bit channels. Clearly way over the 9 entries of the SDL_expand_byte array. (Not that a signed integer would help.) Then the macro tries to access the lookup table with the channel value which could be up to 1023. If the previous indirection didn't cause an access violation this one will.
I guess it's not worth modifying this macro for a format that only a few will use. It will only make the other blitters slower. I don't have good ideas to solve this issue.
Attached is a test case that does three blits. A copy one that work and the two that use the functions mentioned above.
[1] https://hg.libsdl.org/SDL/file/cd1994d4f3c6/src/video/SDL_blit.h#l303
[2] https://hg.libsdl.org/SDL/file/cd1994d4f3c6/src/video/SDL_pixels.c#l540
Simon Hug
Some code in SDL loads libraries with SDL_LoadObject to get more information or use newer APIs. SDL_LoadObject may fail, set an error message and SDL will continue with some fallback code. Since SDL will overwrite the error or exit the function with a return value that indicates success, the error form SDL_LoadObject for the optional stuff might as well be cleared right away.
Eric Wasylishen 2017-07-26 18:42:58 UTC
I set up an (admittedly exotic) 3-monitor setup, and when I enter fullscreen-desktop on the middle display (#2), the SDL window is off center. (covers half of monitor #2 and most of monitor #3).
The displays are arranged from left to right:
Display #1 (main): 2880x1800, 200% scaling
Display #2: 1920x1200, 150% scaling
Display #3: 1920x1080, 100% scaling
SDL display bounds:
INFO: Bounds: 1440x900 at 0,0
INFO: Bounds: 1281x801 at 1921,0 (these are incorrect)
INFO: Bounds: 1920x1080 at 4800,0
Correct bounds reported by calling EnumDisplayMonitors and printing the LPRECT param of the callback:
1440x900 at (0, 0)
1280x800 at (2880, 0)
1920x1080 at (4800, 0)
It seems like you need 3 displays to reproduce this, and the left two need DPI scaling, and the 3rd display needs to have a different scale factor than the others.
Related: https://bugzilla.libsdl.org/show_bug.cgi?id=3709
SDL: current hg (11235:6a587b9e0ec8)
Windows 10, Version 10.0.15063 Build 15063
Tested with testdraw2 and testgl2, and pressing alt+enter to enter fullscreen desktop.
This patch reworks SDL_windowsmodes.c to use EnumDisplayMonitors instead of EnumDisplayDevices, so we always have an HMONITOR for each SDL display.
With access to an HMONITOR, we can get the monitor bounds in virtual screen coordinates the proper way, by calling GetMonitorInfo. (whereas the original code was doing some calculations - e.g. "data->DeviceMode.dmPosition.x * data->ScaleX" - to try to get virtual screen coordinates. These worked in simple cases, but failed in more complex cases like this bug)
The one potential problem with my patch is, the ChangeDisplaySettingsEx docs say that you're supposed to get the display name from EnumDisplayDevices, but I'm getting the display name from GetMonitorInfo now.
Simon Hug
KMSDRM_VideoInit allocates and frees some connectors and encoders but doesn't set the pointer to NULL after freeing. The cleanup code at the end may free one of those garbage pointer should an error happen in the initialization.
Simon Hug
When WIN_WindowProc processes the WM_TOUCH message, it doesn't check if the touch functions have been properly loaded and may call a NULL pointer. It's probably an extremely rare case, but here's a patch that adds some checks anyway.
Levi Bard
In some environments, xrandr modes initialization can fail even though xrandr support is present and of a sufficient version.
(The one I encountered was an AWS instance running a virtual display)
The attached patch allows SDL to keep trying other methods if xrandr modes initialization fails (still subject to SDL_VIDEO_X11_REQUIRE_XRANDR).
Manuel
The attached patch adds support for KMS/DRM context graphics.
It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation.
Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition.
X86 systems use KMS right away in every current GNU/Linux system.
Simple build instructions:
$./autogen.sh
$./configure --enable-video-kmsdrm
$make
Now the clipboard isn't lost if you destroy a specific SDL_Window, as it
works on other platforms. You will still lose the clipboard data on
SDL_Quit() or process termination, but that's X11 for you; run a
Clipboard Manager daemon.
Fixes Bugzilla #3222.
Fixes Bugzilla #3718.
Eric Wasylishen
I think I found a better fix.
The problem with https://hg.libsdl.org/SDL/rev/ebdc0738b1b5 is setting the styleMask to 0 clears the NSWindowStyleMaskFullScreen bit, which then confuses Cocoa later when you try to leave fullscreen. Instead I'm just clearing the NSWindowStyleMaskResizable bit, although SetWindowStyle(window, NSWindowStyleMaskFullScreen); seems to also work.
Eric Wasylishen
Unfortunately this commit seems to have broken exiting desktop-fullscreen.
- Launch testgl2.
- Press alt+enter to go fullscreen-desktop
- Press alt+enter again. The spinning cube will freeze, and the window stays fullscreen desktop.
Simon Hug
SDL_GL_GetAttribute doesn't check if a video driver has been initialized and will access the SDL_VideoDevice pointer, which is NULL at that point.
I think all of the attributes require an initialized driver, so a simple NULL check should fix it. Patch is attached.
Jason Wyatt
After hiding the window, SDL_WINDOW_HIDDEN/SDL_WINDOW_SHOWN flags on a window are correctly updated. However on the next SDL_PumpEvents, they are set incorrectly.
This appears to be because X11_GetNetWMState does not check whether the _NET_WM_STATE property exists (it shouldn't on unmapped windows, see https://specifications.freedesktop.org/wm-spec/wm-spec-1.3.html#idm140130317598336). This results in an empty list of atoms for the state, which would imply that the window is not hidden.
(Seen on Fedora 24, Gnome)
--
Dan Ginsburg
More details on my proposed patch: I am on Kubuntu 16.04.2. I ran into this same bug, but with Jason's patch I found that actualType != None was true so the SDL_WINDOW_HIDDEN would still not be set. My fix instead is to explicitly check for whether the window is unmapped rather than relying on the returned values in XGetWindowProperty.
Holger Schemel
Summary: This patch adds support for key events for the "rewind" and "fast forward" media keys on the Amazon Fire TV remote control.
How to reproduce the problem: Run Android build of SDL2 application on the Amazon Fire TV (tested with "stick" version) and log key events.
Expected behaviour: Every key pressed on the Fire TV remote control should result in a corresponding key event (pressed/released).
Observed behaviour: Of the bottom row of buttons on the Fire TV remote control, only the "play/pause" (middle) button generates a key event, while the "rewind" (left) and "fast forward" (right) buttons to not generate any event at all.
The attached patch adds support for these two missing buttons/keys.
Note 1: Some missing definitions were added for the already existing key codes SDL_SCANCODE_APP1 and SDL_SCANCODE_APP2 (to keep up the correct order of enumerations / array positions when adding the two new key codes).
Note 2: Definitions in "scancodes_linux.h" and "scancodes_xfree86.h" (to also add support for these keys on other platforms) were added without testing. However, I was unable to find corresponding definitions for these two media keys for Windows and Mac OS X.
Note 3: I have also updated the (broken) link to the USB usage page standard PDF document (comment in "include/SDL_scancode.h").
Bogomancer
On X11, windows created using the shaped window API appear distorted unless the width of the shape surface is divisible by 8.
Steps to reproduce:
1) Use your favorite image editor to resize one of the images in test/shapes/ to a width that's not a multiple of 8.
2) Compile and run test/testshape.c on the image you edited.
3) The shaped window will appear twisted and distorted.
It appears the bug was not caught sooner because all the test images are either 640 or 256 pixels wide.
I tracked down the bug to SDL_CalculateShapeBitmap() in SDL_shape.c. The shape surface is reduced to a 1-bit-per-pixel mask, but the original code doesn't take into account that X11 apparently wants each scanline to begin on a new byte.
Amruth Raj
- My app runs in full screen to play video(I use SDL_WINDOW_FULLSCREEN_DESKTOP)
- Cmd-tab to go out of full screen to another app
- Cmd-tab again to get back to my app
- Press left mouse button at one of the edges of the screen, don't release yet.
After this point the main thread is stuck until I release the left mouse button and hence video rendering doesn't happen anymore.
On debugging more, I see that thread 0 is stuck as shown below with sendEvent processing left mouse down. It comes out only after it receives a left mouse up. There are some frames below which show NSWindowResizing, but my window flag doesn't have SDL_WINDOW_RESIZABLE set.
Thread 0:: CrBrowserMain Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fffbe13d34a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fffbe13c797 mach_msg + 55
2 com.apple.CoreFoundation 0x00007fffa889d434 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fffa889c8c1 __CFRunLoopRun + 1361
4 com.apple.CoreFoundation 0x00007fffa889c114 CFRunLoopRunSpecific + 420
5 com.apple.HIToolbox 0x00007fffa7dfdebc RunCurrentEventLoopInMode + 240
6 com.apple.HIToolbox 0x00007fffa7dfdcf1 ReceiveNextEventCommon + 432
7 com.apple.HIToolbox 0x00007fffa7dfdb26 _BlockUntilNextEventMatchingListInModeWithFilter + 71
8 com.apple.AppKit 0x00007fffa6396a54 _DPSNextEvent + 1120
9 com.apple.AppKit 0x00007fffa6b127ee -[NSApplication(NSEvent) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 2796
10 com.apple.AppKit 0x00007fffa66f568d +[NSWindow(NSWindowResizing) _mouseHysteresisCheck:withExpiration:andDistance:finalMouseLocation:] + 525
11 com.apple.AppKit 0x00007fffa65eedb5 -[NSWindow(NSWindowResizing) _hitTestWithHysteresisCheck:forEvent:allowWindowDragging:] + 394
12 com.apple.AppKit 0x00007fffa6c8f0db -[NSWindow(NSEventRouting) _handleMouseDownEvent:isDelayedEvent:] + 1873
13 com.apple.AppKit 0x00007fffa6c8ca6c -[NSWindow(NSEventRouting) _reallySendEvent:isDelayedEvent:] + 1942
14 com.apple.AppKit 0x00007fffa6c8bf0a -[NSWindow(NSEventRouting) sendEvent:] + 541
15 org.libsdl.SDL2 0x000000010d46d74a -[SDLWindow sendEvent:] + 90
16 com.apple.AppKit 0x00007fffa6b10681 -[NSApplication(NSEvent) sendEvent:] + 1145
17 org.libsdl.SDL2 0x000000010d46532b -[SDLApplication sendEvent:] + 139
18 org.libsdl.SDL2 0x000000010d466b2f Cocoa_PumpEvents + 495
19 org.libsdl.SDL2 0x000000010d44c1d5 SDL_PumpEvents_REAL + 53
20 org.libsdl.SDL2 0x000000010d44c2f5 SDL_WaitEventTimeout_REAL + 53
21 org.libsdl.SDL2 0x000000010d44c2b7 SDL_PollEvent_REAL + 23
22 org.libsdl.SDL2 0x000000010d51bb24 SDL_PollEvent + 36
23 libTest.dylib 0x000000010cf3e0e8 SDLEventProcessor::processEvents(int) + 568
24 Test 0x000000010cde6bba BrowserApp::RunAppMessageLoop(BAInstData*, CefStringBase, CefStringBase) + 810
25 Test 0x000000010ce04bbc main + 17980
26 libdyld.dylib 0x00007fffbe016235 start + 1
I further noticed that while entering full screen in SDL_cocoawindow.m NSResizableWindowMask is set. If I clear it inside windowDidEnterFullScreen, then, the issue doesn't repro.
This is discussed at https://discourse.libsdl.org/t/main-thread-gets-stuck-on-left-mouse-down/22753/3 and thanks to Eric for the pointers.
The Xlib documentation demands that 32-bit values here be passed in a long,
even when long itself isn't a 32-bit value. Otherwise libx11 might read
memory incorrectly.
Fixes Bugzilla #3692.
