This gracefully recovers when a device format is changed, and will switch
to the new default device if the current one is unplugged, etc.
This does not handle when a new default device is added; it only notices
if the current default goes away. That will be fixed by implementing the
stubbed-out MMNotificationClient_OnDefaultDeviceChanged() function.
* alsa hotplug thread is low priority
* give a chance for other threads to catch up when audio playback is not progressing
* use nonblocking for alsa audio capture
There is a bug with SDL hanging when an audio capture USB device is removed, because poll never returns
We will throw away the data anyhow, but some apps depend on the callback
firing to make progress; testmultiaudio.c, if nothing else, is an example
of this.
Capture also will now fire the callback in these conditions, offering nothing
but silence.
Apps can check SDL_GetAudioDeviceStatus() or listen for the
SDL_AUDIODEVICEREMOVED event if they want to gracefully deal with
an opened audio device that has been unexpectedly lost.
This is just enough to get you through a file that just used the extended
header for float or int data. It doesn't handle all the other things that
you expect from this header, like 24-bit samples inside a 32-bit container
or speaker masks.
This should remain binary compatible with Windows XP, as we dynamically
load anything we need and fall back to DirectSound/WinMM/XAudio2 if not
available.
Walter van Niftrik
We have found that since SDL 2.0.5 the audio callback thread is created with a very small stack size. In our application this is leading to stack overflows.
We believe there is a bug at http://hg.libsdl.org/SDL/file/391fd532f79e/src/audio/SDL_audio.c#l1132, where the is_internal_thread flag appears to be inverted.
This defaults to the internal SDL resampler, since that's the likely default
without a system-wide install of libsamplerate, but those that need more can
tweak this.
This currently favors libsamplerate over the fast path (quality over speed),
but I'm not sure that's the correct approach, as there may be surprising
changes in performance metrics depending on what packages are available on
a user's system. That being said, currently, the only thing with access to
SDL_AudioStream is an SDL audio device's thread, and it might be mostly idle
otherwise, so maybe this is generally good.
Turns out that iterating from 0 to channels-1 was a serious performance hit!
These cases now tend to match or beat the original audio resampler's speed!
This allows us to avoid an extra copy, allocate less memory and reduce cache
pressure. On the downside: we have to do a lot of tapdancing to resample the
buffer in reverse when the output is growing.
It's expensive and (hopefully) unnecessary. If this becomes an overflow
problem, we could multiply both values by 0.5f before adding them, but let's
see if we can get by without the extra multiplication first.
We never seem to overflow the source buffer now; this might have been a
leftover from a bug that was covered by Vitaly's fixes?
Removing this conditional makes the resampler 10-20% faster. Left an
assert in there for debug builds, in case this still happens.
Removed some needless things ("len / sizeof (Uint8)"), and made sure the
int32 -> float code uses doubles to avoid working with large integer values
in a 32-bit float.
Lukasz Biel
Tried to compile SDL2 using newest version of VS.
Got:
SDL_audiocvt.obj : error LNK2019: unresolved external symbol memcpy referenced in function SDL_ResampleCVT
1>E:\Users\dotPo\Lib\SDL\VisualC\x64\Release\SDL2.dll : fatal error LNK1120: 1 unresolved externals
whole compilation process: http://pastebin.com/eWDAvBce
Steps to reproduce:
clone http://hg.libsdl.org/SDL using tortoise hg,
open SDL\VisualC\SDL.sln,
when promted if should retarget solution click ok,
select release x64 build type,
Build/Build Solution
attempt 2, using Visual Studio cmake support:
open folder SDL\
select release x64 build type,
run CMake\Build CMakeLists.txt
build fails
When switched to debug build type, buils succeeds in both cases.
VS 2017 is still beta.
It causes audio pops if you're converting in chunks (and needs to
allocate/initialize/free on each convert). We'll either adjust this interface
when we break ABI for 2.1 to make this usable, or publish the SDL_AudioStream
API for those that want a streaming solution.
In the meantime, the "simple" resampler produces "good enough" audio without
pops and doesn't have to be initialized, so that'll do for now on the
SDL_AudioCVT interface.
There was a draft of this where it did audio conversion into the final buffer,
if there was enough room available past what you asked for, but that interface
got removed, so the parameters didn't make sense (and we were using the
wrong one in any case, too!).
Coriiander
This notice is about a misplaced comment.
Often times when we use an #if #endif sequence, the #endif is followed by a comment to indicate what #if statement it belonged to. The SDL_xaudio2.c file contains a misplaced comment, as follows (I stripped the other comments):
#ifdef __GNUC__
# define SDL_XAUDIO2_HAS_SDK 1
#elif defined(__WINRT__)
# define SDL_XAUDIO2_HAS_SDK
#include "SDL_xaudio2.h"
#else
#if 0
#include <dxsdkver.h>
#if (!defined(_DXSDK_BUILD_MAJOR) || (_DXSDK_BUILD_MAJOR < 1284))
# pragma message("Your DirectX SDK is too old. Disabling XAudio2 support.")
#else
# define SDL_XAUDIO2_HAS_SDK 1
#endif
#endif
#endif /* 0 */
That final /* 0 */ should be moved one line up. Like this (I tabbed it out for you to make it more clear):
This was a leftover of simplifying the resamplers down from autogenerated
code; I forgot to make something that the generator hardcoded into something
variable.
Fixes Bugzilla #3507.
Vitaly Novichkov
Okay, when I researched code and algorithm, I tried to replace condition "while(dst >= target)" with "while(dst > target)" and crashes are gone.
Seems on some moments it tries to write into the place before memory block begin, therefore phantom crashes appearing after some moments.
This no longer uses a script to generate code for every possible type
conversion or resampler. This caused a bloat in binary size and and compile
times. Now we use a handful of more generic functions and assume staying in
the CPU cache is the most important thing anyhow.
This shrinks the size of the final build (in this case: macOS X amd64, -Os to
optimize for size) by 15%. When compiling on a single core, build times drop
by about 15% too (although the previous cost was largely hidden by multicore
builds).
Apparently some systems see "hw:", some see "default:" and some see
"sysdefault:" (and maybe others!). My workstation sees both "hw:" and
"sysdefault:" ...
Try to find a prefix we like and prioritize the prefixes we (think) we want
most. If everything else fails, if there's a "default" (not a prefix) device
name, list that by itself so the user gets _something_ here.
If we can't find a prefix we like _and_ there's no "default" device, report
no hardware found at all.
Simon Sandstr?m
As stated in Summary. The switch statement will execute the default case and set a SDL error message: "SDL_MixAudio(): unknown audio format".
There are atleast two more problems here:
1. SDL_MixAudioFormat does not notify the user that an error has occured and that a SDL error message was set. It took me awhile to understand why I couldn't mix down the volume on my AUDIO_U16LSB formatted audio stream.. until I started digging in the SDL source code.
2. The error message is incorrect, it should read: "SDL_MixAudioFormat(): unknown audio format".
This tends to be a frequent spot where drivers hang, and the waits were
often unreliable in any case.
Instead, our audio thread now alerts the driver that we're done streaming audio
(which currently XAudio2 uses to alert the system not to warn about the
impending underflow) and then SDL_Delay()'s for a duration that's reasonable
to drain the DMA buffers before closing the device.
This tries to make SDL robust against device drivers that have hung up,
apps don't freeze in catastrophic (but not necessarily uncommon) conditions.
Now we detach the audio thread and let it clean up and don't care if it
never actually runs to completion.
James Zipperer
The problem I was seeing was that the the ALSA hotplug thread would call SDL_RemoveAudioDevice, but my application code was not seeing an SDL_AUDIODEVICEREMOVED event to go along with it. To fix it, I added some code into SDL_RemoveAudioDevice to call SDL_OpenedAudioDeviceDisconnected on the corresponding open audio device. There didn't appear to be a way to cross reference the handle that SDL_RemoveAudioDevice gets and the SDL_AudioDevice pointer that SDL_OpenedAudioDeviceDisconnected needs, so I ended up adding a void *handle field to struct SDL_AudioDevice so that I could do the cross reference.
Is there some other way beside adding a void *handle field to the struct to get the proper information for SDL_OpenedAudioDeviceDisconnected?
James Zipperer
Close the audio device before waiting for the audio thread to complete, which fixes a situation where the audio thread never completes
Add an additional check in the audio thread to see if the device is enabled and bail out if the device is no longer enabled
The Apple TV remote is currently exposed as a joystick with its touch surface treated as two axes. Key presses are also generated when its buttons and touch surface are used.
A new hint has been added to help deal with deciding whether to background the app when the remote's menu button is pressed: SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS.
AudioQueues are available in Mac OS X 10.5 and later (and iOS 2.0 and later).
Their API is much more clear (and if you don't mind the threading tapdance
to get its own CFRunLoop) much easier to use in general for our purposes.
As an added benefit: they seemlessly deal with format conversion in ways
AudioUnits don't: for example, my MacBook Pro's built-in microphone won't
capture at 8000Hz and the AudioUnit version wouldn't resample to hide this
fact; the AudioQueue version, however, can handle this.
Moved this code from winmm into core so both can use it.
DirectSound (at least on Win10) also returns truncated device names, even
though it's handed in as a string pointer and not a static-sized buffer. :/
Otherwise, if you had a massive, one-time queue buildup, the memory from that
remains allocated until you close the device. Also, if you are just using a
reasonable amount of space, this would previously cause you to reallocate it
over and over instead of keeping a little bit of memory around.
