- _num_clips was not set in constructor, so a NULL _clips could be
mistakenly dereferenced.
- As _clips is accessible outside the class, it is not a good idea to
free/reallocate it. Try to limit this by reallocating only when it needs to
grow.
Partially fixes Bugzilla #4442.
warning: either cast from 'int' to 'size_t' (aka 'unsigned long') is ineffective, or there is loss of precision before the conversion [bugprone-misplaced-widening-cast]
This can happen if a window is still grabbed when we try to move it, or if
the X11 ecosystem is just in a bad mood, I guess.
This makes sure that SDL will report the correct position for a window;
otherwise, SDL_GetWindowPosition will just report whatever the last
SDL_SetWindowPosition call requested, even if the window didn't actually move.
Fixes Bugzilla #4646.
Much of the heavy lifting of this optimization is lifted from the Pixman
project, which is distributed under an MIT-style license. As far as possible,
these elements have been relicensed to the zlib license.
Fixes an issue in macOS 10.15 where the displayed content would move up after entering, exiting and re-entering exclusive fullscreen when certain display modes were used (bug #4822).
Bug #3949 is also related to this change.
Use eglGetProcAddress for everything on EGL >= 1.5. Try SDL_LoadFunction first
for EGL <= 1.4 in case it's a core symbol, and as a fallback if
eglGetProcAddress fails. Finally, for EGL <= 1.4, fallback to
eglGetProcAddress to catch extensions not exported from the shared library.
(Maybe) Fixes Bugzilla #4794.
Sylvain
Seems to be a regression in this commit: https://hg.libsdl.org/SDL/rev/7fdbffd47c0e
SDL_CalculatePitch() was using format->BytesPerPixel, now it uses SDL_BYTESPERPIXEL().
The underlying issue is that "surface->format->BytesPerPixel" is *not* always the same as SDL_BYTESPERPIXEL(format);
BytesPerPixel defined as format->BytesPerPixel = (bpp + 7) / 8;
vs
#define SDL_BYTESPERPIXEL(format) ... (format & 0xff)
Because of SDL_pixels.h format definitions, one is giving a BytesPP 1, the other 0.
"This patch does the following:
* Instead of SDL_FillRects calling SDL_FillRect in a loop the opposite
happens -- SDL_FillRect (a specific case) calls SDL_FillRects (a general case)
with a count of 1
* The switch/case block is moved out of the loop -- it modifies the color
once and stores the fill routine in a pointer which is then used throughout
the loop"
Fixes Bugzilla #4674.
The 10 ms delay effectively caps input polling at 100 Hz and rendering
at 100 FPS if applications use these functions in their event loop. The
delay may also lead to dropped frames even at 60 FPS due if they are
unlucky enough to hit the delay and rendering takes longer than 6 ms.
fix building with Mesa 19.2
With Mesa 19.2 building fails with:
/include/GLES/gl.h:63:25: error: conflicting types for 'GLsizeiptr'
The same type is defined in include/SDL_opengl.h for OpenGL and the two
headers should not be included at the same time.
This was just never noticed because the same header guard '__gl_h_' was
used. This was changed in Mesa. The result is this error.
Fix this the same way GLES2 already handles this: Don't include the GLES
header when the OpenGL header was already included.
(https://hg.libsdl.org/SDL/rev/6a3670d6108d)
The X11 target sets mouse->last_x and last_y in EnterNotify and then calls
SDL_SendMouseMotion(), which throws away the new position because it matches
the mouse->last_x and last_y we just set, meaning that if the pointer is
in the window when it created, SDL_GetMouseState() will report a position of
0,0 until a MotionNotify event (the pointer moves) arrives and corrects the
mouse state.
Mostly fixes Bugzilla #1612.
The SDL_USE_LIBDBUS define is set inside SDL_debug.h, therefore the
circular dependency made it impossible for this feature to be enabled.
Instead, guard SDL_dbus.h based on the autoconf variable HAVE_DBUS_DBUS_H
Additionally, fix one of the rtkit comments. CAP_SYS_NICE isn't required
to achieve high priority. But there is some scheduler config that rtkit
needs the app to setup.
The Offscreen video driver is intended to be used for headless rendering
as well as allows for multiple GPUs to be used for headless rendering
Currently only supports EGL (OpenGL / ES) or Framebuffers
Adds a hint to specifiy which EGL device to use: SDL_HINT_EGL_DEVICE
Adds testoffscreen.c which can be used to test the backend out
Disabled by default for now
Background:
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture
between AMD and Haiguang Information Technology Co.,Ltd., aims at
providing high performance x86 processor for China server market.
Its first generation processor codename is Dhyana, which
originates from AMD technology and shares most of the
architecture with AMD's family 17h, but with different CPU Vendor
ID("HygonGenuine")/Family series number(Family 18h).
Related Hygon kernel patch can be found on:
http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
Best regards.
The LE transformation for vec_perm has an implicit assumption that the
permutation is being used to reorder vector elements (in this case 4-byte
integer word elements), not to reorder bytes within those elements. Although
this is legal behavior, it is not anticipated by the transformation performed
by the compilers.
This causes pygame-1.9.1 test failure on PPC64LE because blitted pixmaps are
corrupted there due to how SDL uses vec_perm().
From RedHat / Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=1392465
Original patch was provided by: Menanteau Guy <menantea@linux.vnet.ibm.com>
If KMSDRM_drmModeSetCrtc is called when the swap interval is
set to 0, the driver behaves as though vertical sync is engaged by
limiting framerate to the refresh rate, but performance is much worse
than with vertical sync enabled.
Resolve this issue by ensuring that the Crtc is only set up once,
and KMSDRM_drmModePageFlip is called, albeit without any followup
queueing or waiting for flips.
Daniel Drake
A long time ago, it was possible to play neverball on Linux using the accelerometer found in HP laptops.
The kernel exposes the accelerometer as a joystick (/dev/input/jsX) as well as an evdev device (/dev/input/eventX). I guess it worked fine when SDL was using the js interface, but then stopped working here: http://hg.libsdl.org/SDL/rev/fdaeea9e7567
Looking at current code which uses udev to discover joysticks, it looks for the udev tag ID_INPUT_JOYSTICK.
However udev's internal input_id logic specifically tags accelerometers as ID_INPUT_ACCELEROMETER and nothing else.
This looks like a good fit for SDL_HINT_ACCELEROMETER_AS_JOYSTICK.
Ozkan Sezer
As for the issue: This bmp reports bpp=0, therefore SDL_CalculatePitch()
returns pitch==0, which is then fed to SDL_malloc() (which is malloc())
and malloc(0) returns _something_ which is not NULL but not someting
that we expect.. Then testsprite.c:LoadSprite() accesses the pixels
as *(Uint8*)pixels which valrind reports as:
==15533== Invalid read of size 1
==15533== at 0x8048C08: LoadSprite (testsprite.c:45)
==15533== by 0x80492FC: main (testsprite.c:224)
==15533== Address 0x449e588 is 0 bytes after a block of size 0 alloc'd
==15533== at 0x40072B2: malloc (vg_replace_malloc.c:270)
==15533== by 0x4045719: SDL_CreateRGBSurface (SDL_surface.c:126)
==15533== by 0x40403C1: SDL_LoadBMP_RW (SDL_bmp.c:237)
==15533== by 0x8048BB2: LoadSprite (testsprite.c:36)
==15533== by 0x80492FC: main (testsprite.c:224)
Besides, valrind also reports this:
==15533== Conditional jump or move depends on uninitialised value(s)
==15533== at 0x40403F3: SDL_LoadBMP_RW (SDL_bmp.c:247)
==15533== by 0x8048BB2: LoadSprite (testsprite.c:36)
==15533== by 0x80492FC: main (testsprite.c:224)
Easy/quick solution would be early-rejecting a bmp with 0 bpp from SDL_bmp.c:SDL_LoadBMP_RW()
