Matthew
Its possible to set SDL_CaptureMouse() so you continue receiving mouse input while the mouse is outside your window. This works however There is then a gap where no messages send, which is when the mouse is hovering the title bar and the window edges.
X11 seemed to be confused by the broad definition, so WEIGHT_NAME,
SLANT and SETWIDTH_NAME were defined, thus fixing the font lookup
on some systems (tested on Mageia 6 with X11 1.19.1).
Fixes bug 3571.
Tom Seddon
GL_ActivateRenderer may call GL_UpdateViewport, which leaves the GL_PROJECTION matrix selected. But after GL_ResetState, the GL_MODELVIEW matrix is selected, suggesting that's the intended default state.
It seems at least like these should be consistent. Presumably GL_UpdateViewport should be doing a glMatrixMode(GL_MODELVIEW) before it finishes.
Also updates the naming of these Xbox Wireless Controllers connected via USB (and thus the third-party Xbox Controller Driver) to match.
The Xbox Wireless Controller entries are now listed, in order, via USB, bia Bluetooh (with older firmware) and via Bluetooth (with firmware 3.1.1221.0).
This is a bleeding edge API, added to Windows 10 Anniversary Edition (build
1607, specifically).
https://msdn.microsoft.com/en-us/library/windows/desktop/mt774976(v=vs.85).aspx
Nothing supports this yet, including WinDbg, Visual Studio, minidumps, etc,
so we still need to also use the RaiseException hack. But presumably tools
will use this API as a more robust and universal way to get thread names
sooner or later, so we'll start broadcasting to it now.
Firmware revision 3.1.1221.0 changes the mapping of the Xbox One S
controller in Bluetooth mode. Aside from changing the layout of
other buttons, this revision also changes the triggers to act as
Accelerator and Brake axes from the simulation controls page.
The Darwin sysjoystick code didn't previously map anything at these
axes, making it impossible to detect input on these two buttons.
This defaults to the internal SDL resampler, since that's the likely default
without a system-wide install of libsamplerate, but those that need more can
tweak this.
This currently favors libsamplerate over the fast path (quality over speed),
but I'm not sure that's the correct approach, as there may be surprising
changes in performance metrics depending on what packages are available on
a user's system. That being said, currently, the only thing with access to
SDL_AudioStream is an SDL audio device's thread, and it might be mostly idle
otherwise, so maybe this is generally good.
Turns out that iterating from 0 to channels-1 was a serious performance hit!
These cases now tend to match or beat the original audio resampler's speed!
This allows us to avoid an extra copy, allocate less memory and reduce cache
pressure. On the downside: we have to do a lot of tapdancing to resample the
buffer in reverse when the output is growing.
It's expensive and (hopefully) unnecessary. If this becomes an overflow
problem, we could multiply both values by 0.5f before adding them, but let's
see if we can get by without the extra multiplication first.
We never seem to overflow the source buffer now; this might have been a
leftover from a bug that was covered by Vitaly's fixes?
Removing this conditional makes the resampler 10-20% faster. Left an
assert in there for debug builds, in case this still happens.
white.magic
The logic which decides if a device enumerated via the direct input system in the function EnumJoysticksCallback in SDL_dinputjoystick.c is processed is discarding valid joystick devices due to the assumption that devices of the type DI8DEVTYPE_SUPPLEMENTAL are not valid devices.
This change was added with 2.0.4 with this commit http://hg.libsdl.org/SDL/rev/1b9d40126645 that is linked to this bug report https://bugzilla.libsdl.org/show_bug.cgi?id=2460 which indicates that in that case devices of the type DI8DEVTYPE_SUPPLEMENTAL were not desirable as they caused a singular device to emit multiple "device added" events.
Since then there appear to have been a few fixes to handle devices that fall into various other classes in the following two commits:
http://hg.libsdl.org/SDL/rev/10ffb4787d7a and http://hg.libsdl.org/SDL/rev/6a2bbac05728
Two devices I have reports of failing to be listed when the DI8DEVTYPE_SUPPLEMENTAL type is excluded are ECS Gametric Throttle and Thrustmaster MFD Cougar.
Sam Lantinga
I verified that the OUYA controller shows up as a single device with this change, so I've reverted the change to ignore supplemental devices, leaving framework in place to easily add devices that we want to ignore.
Removed some needless things ("len / sizeof (Uint8)"), and made sure the
int32 -> float code uses doubles to avoid working with large integer values
in a 32-bit float.
Mark Callow
The attached patch does the following for the X11 and Windows platforms, the only ones where SDL attempts to use context_create_es_profile:
- Adds SDL_HINT_OPENGL_ES_DRIVER by which the application can
say to use the OpenGL ES driver & EGL rather than the Open GL
driver. (For bug #2570)
- Adds code to {WIN,X11}_GL_InitExtensions to determine the maximum
OpenGL ES version supported by the OpenGL driver (for bug #3145)
- Modifies the test that determines whether to use the OpenGL
driver or the real OpenGL ES driver to take into account the
hint, the requested and supported ES version and whether ES 1.X
is being requested. (For bug #2570 & bug #3145)
- Enables the testgles2 test for __WINDOWS__ and __LINUX__ and adds
the test to the VisualC projects.
With the fix in place I have run testdraw2, testgl and testgles2 without any issues and have run my own apps that use OpenGL, OpenGL ES 3 and OpenGL ES 1.1.
Lukasz Biel
Tried to compile SDL2 using newest version of VS.
Got:
SDL_audiocvt.obj : error LNK2019: unresolved external symbol memcpy referenced in function SDL_ResampleCVT
1>E:\Users\dotPo\Lib\SDL\VisualC\x64\Release\SDL2.dll : fatal error LNK1120: 1 unresolved externals
whole compilation process: http://pastebin.com/eWDAvBce
Steps to reproduce:
clone http://hg.libsdl.org/SDL using tortoise hg,
open SDL\VisualC\SDL.sln,
when promted if should retarget solution click ok,
select release x64 build type,
Build/Build Solution
attempt 2, using Visual Studio cmake support:
open folder SDL\
select release x64 build type,
run CMake\Build CMakeLists.txt
build fails
When switched to debug build type, buils succeeds in both cases.
VS 2017 is still beta.
It causes audio pops if you're converting in chunks (and needs to
allocate/initialize/free on each convert). We'll either adjust this interface
when we break ABI for 2.1 to make this usable, or publish the SDL_AudioStream
API for those that want a streaming solution.
In the meantime, the "simple" resampler produces "good enough" audio without
pops and doesn't have to be initialized, so that'll do for now on the
SDL_AudioCVT interface.
K_NORMTAB, K_SHIFTTAB, K_ALTTAB, K_ALTSHIFTTAB
In the normal case we'll load all the keymaps from the kernel, but this reduces the size of the SDL library for the fallback case when we can't get to the tty.
Mark Logan 2015-08-24 15:57:50 UTC
In SDL_windowsopengles.c, WIN_GLES_SetSwapInterval is as follows:
WIN_GLES_SetSwapInterval(_THIS, int interval)
{
/* FIXME: This should call SDL_EGL_SetSwapInterval, but ANGLE has a bug that prevents this
* from working if we do (the window contents freeze and don't swap properly). So, we ignore
* the request for now.
*/
SDL_Log("WARNING: Ignoring SDL_GL_SetSwapInterval call due to ANGLE bug");
return 0;
}
With a recent version of ANGLE (early July) calling SDL_EGL_SetSwapInterval with a D3D11 backend appears to work just fine. I am working on testing this with D3D9.
--
Alex Szpakowski
I found the bug, it was fixed in 2013. https://bugs.chromium.org/p/angleproject/issues/detail?id=481
In my opinion it should be safe to unconditionally use SetSwapInterval now. Anyone who encounters the bug should update their ANGLE to a version less than 3 years old, especially since they'd be using a SDL version that's 3+ years newer than their ANGLE version.
Rob
I've ran into an issue where I successfully receive SDL_KEY[UP,DOWN] events but not SDL_TEXTINPUT or SDL_TEXTEDITING. In my case the code in SDL_EVDEV_do_text_input() is returning early (on error) prior to calling SDL_SendKeyboardText(). I'm running on the RaspberryPi 3, without X11.
In SDL_EVDEV_do_text_input() there is a condition to check keysyms with a type value below 0xf0, then subtract 0xf0 from type. Without understanding the purpose of this code, I disabled it, recompiled, and I'm getting correct SDL_TEXTINPUT events. I'm going to guess that my hack/fix is going to be problematic in some other environment, but after some initial testing it looks like everything is running fine in my setup.
Richard Russell
Resuming from a suspended state results in a black screen. This only happens when using GLES 1.1 (GLES 2 resumes correctly) and when the render target has been changed using SDL_SetRenderTarget. This problem is new in 2.0.4.
The attached test case demonstrates the issue.
Sylvain Becker has apparently found a fix as follows:
"In the opengles leaf function (in 'src/render/opengles/SDL_render_gles.c'), it appears there is a call to 'GLES_ActivateRenderer' in 'GLES_SetRenderTarget', which is not present in opengles2. When commenting out this 'GLES_ActivateRenderer', it seems to resume fine".
This appears to fix the testcase perfectly, but I don't know whether it could have any undesirable side-effects.
tvc
I believe this patch should fix it, instead of looping through all the tty's and seemingly selecting the wrong one and corrupting the console I've just made SDL open /dev/tty which is the console attached to the current process anyway.
felix
Here's a snippet of SDL_DestroyRenderer from hg revision 10746:7540ff5d0e0e:
SDL_Texture *texture = NULL;
SDL_Texture *nexttexture = NULL;
/* ... */
for (texture = renderer->textures; texture; texture = nexttexture) {
nexttexture = texture->next;
SDL_DestroyTexture(texture);
}
SDL_DestroyTexture removes the texture from the linked list pointed to by the renderer and ends up calling SDL_DestroyTextureInternal, which contains this:
if (texture->native) {
SDL_DestroyTexture(texture->native);
}
If it happens that texture->native is an alias of nexttexture two stack frames up, SDL_DestroyRenderer will end up trying to destroy an already freed texture. I've had this very situation happen in dosemu2.
Bug introduced in revision 10650:a8253d439914, which has a somewhat ironic description of "Fixed all known static analysis bugs"...
Rob
When calling ioctl(fd, KDGKBTYPE, &type) in SDL_EVDEV_is_console(), we declare type as an 'int'. This should be a 'char'. The subsequent syscall, and kernel code, only writes the lower byte of the word.
See: http://lxr.free-electrons.com/source/drivers/tty/vt/vt_ioctl.c?v=4.4#L399
ucval = KB_101;
ret = put_user(ucval, (char __user *)arg);
I've observed intermittent behavior related to this, and I can force an error condition by using an int initialized to 0xFFFFFFFF. The resulting ioctl will set type to 0XFFFFFF02, and the conditional return in SDL_EVDEV_is_console() will fail.
Recommend changing to char, or masking off unused bits.
There was a draft of this where it did audio conversion into the final buffer,
if there was enough room available past what you asked for, but that interface
got removed, so the parameters didn't make sense (and we were using the
wrong one in any case, too!).