Levi Bard
In some environments, xrandr modes initialization can fail even though xrandr support is present and of a sufficient version.
(The one I encountered was an AWS instance running a virtual display)
The attached patch allows SDL to keep trying other methods if xrandr modes initialization fails (still subject to SDL_VIDEO_X11_REQUIRE_XRANDR).
Manuel
The attached patch adds support for KMS/DRM context graphics.
It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation.
Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition.
X86 systems use KMS right away in every current GNU/Linux system.
Simple build instructions:
$./autogen.sh
$./configure --enable-video-kmsdrm
$make
Now the clipboard isn't lost if you destroy a specific SDL_Window, as it
works on other platforms. You will still lose the clipboard data on
SDL_Quit() or process termination, but that's X11 for you; run a
Clipboard Manager daemon.
Fixes Bugzilla #3222.
Fixes Bugzilla #3718.
Eric Wasylishen
I think I found a better fix.
The problem with https://hg.libsdl.org/SDL/rev/ebdc0738b1b5 is setting the styleMask to 0 clears the NSWindowStyleMaskFullScreen bit, which then confuses Cocoa later when you try to leave fullscreen. Instead I'm just clearing the NSWindowStyleMaskResizable bit, although SetWindowStyle(window, NSWindowStyleMaskFullScreen); seems to also work.
Eric Wasylishen
Unfortunately this commit seems to have broken exiting desktop-fullscreen.
- Launch testgl2.
- Press alt+enter to go fullscreen-desktop
- Press alt+enter again. The spinning cube will freeze, and the window stays fullscreen desktop.
Simon Hug
SDL_GL_GetAttribute doesn't check if a video driver has been initialized and will access the SDL_VideoDevice pointer, which is NULL at that point.
I think all of the attributes require an initialized driver, so a simple NULL check should fix it. Patch is attached.
Jason Wyatt
After hiding the window, SDL_WINDOW_HIDDEN/SDL_WINDOW_SHOWN flags on a window are correctly updated. However on the next SDL_PumpEvents, they are set incorrectly.
This appears to be because X11_GetNetWMState does not check whether the _NET_WM_STATE property exists (it shouldn't on unmapped windows, see https://specifications.freedesktop.org/wm-spec/wm-spec-1.3.html#idm140130317598336). This results in an empty list of atoms for the state, which would imply that the window is not hidden.
(Seen on Fedora 24, Gnome)
--
Dan Ginsburg
More details on my proposed patch: I am on Kubuntu 16.04.2. I ran into this same bug, but with Jason's patch I found that actualType != None was true so the SDL_WINDOW_HIDDEN would still not be set. My fix instead is to explicitly check for whether the window is unmapped rather than relying on the returned values in XGetWindowProperty.
Holger Schemel
Summary: This patch adds support for key events for the "rewind" and "fast forward" media keys on the Amazon Fire TV remote control.
How to reproduce the problem: Run Android build of SDL2 application on the Amazon Fire TV (tested with "stick" version) and log key events.
Expected behaviour: Every key pressed on the Fire TV remote control should result in a corresponding key event (pressed/released).
Observed behaviour: Of the bottom row of buttons on the Fire TV remote control, only the "play/pause" (middle) button generates a key event, while the "rewind" (left) and "fast forward" (right) buttons to not generate any event at all.
The attached patch adds support for these two missing buttons/keys.
Note 1: Some missing definitions were added for the already existing key codes SDL_SCANCODE_APP1 and SDL_SCANCODE_APP2 (to keep up the correct order of enumerations / array positions when adding the two new key codes).
Note 2: Definitions in "scancodes_linux.h" and "scancodes_xfree86.h" (to also add support for these keys on other platforms) were added without testing. However, I was unable to find corresponding definitions for these two media keys for Windows and Mac OS X.
Note 3: I have also updated the (broken) link to the USB usage page standard PDF document (comment in "include/SDL_scancode.h").
Bogomancer
On X11, windows created using the shaped window API appear distorted unless the width of the shape surface is divisible by 8.
Steps to reproduce:
1) Use your favorite image editor to resize one of the images in test/shapes/ to a width that's not a multiple of 8.
2) Compile and run test/testshape.c on the image you edited.
3) The shaped window will appear twisted and distorted.
It appears the bug was not caught sooner because all the test images are either 640 or 256 pixels wide.
I tracked down the bug to SDL_CalculateShapeBitmap() in SDL_shape.c. The shape surface is reduced to a 1-bit-per-pixel mask, but the original code doesn't take into account that X11 apparently wants each scanline to begin on a new byte.
Amruth Raj
- My app runs in full screen to play video(I use SDL_WINDOW_FULLSCREEN_DESKTOP)
- Cmd-tab to go out of full screen to another app
- Cmd-tab again to get back to my app
- Press left mouse button at one of the edges of the screen, don't release yet.
After this point the main thread is stuck until I release the left mouse button and hence video rendering doesn't happen anymore.
On debugging more, I see that thread 0 is stuck as shown below with sendEvent processing left mouse down. It comes out only after it receives a left mouse up. There are some frames below which show NSWindowResizing, but my window flag doesn't have SDL_WINDOW_RESIZABLE set.
Thread 0:: CrBrowserMain Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fffbe13d34a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fffbe13c797 mach_msg + 55
2 com.apple.CoreFoundation 0x00007fffa889d434 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fffa889c8c1 __CFRunLoopRun + 1361
4 com.apple.CoreFoundation 0x00007fffa889c114 CFRunLoopRunSpecific + 420
5 com.apple.HIToolbox 0x00007fffa7dfdebc RunCurrentEventLoopInMode + 240
6 com.apple.HIToolbox 0x00007fffa7dfdcf1 ReceiveNextEventCommon + 432
7 com.apple.HIToolbox 0x00007fffa7dfdb26 _BlockUntilNextEventMatchingListInModeWithFilter + 71
8 com.apple.AppKit 0x00007fffa6396a54 _DPSNextEvent + 1120
9 com.apple.AppKit 0x00007fffa6b127ee -[NSApplication(NSEvent) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 2796
10 com.apple.AppKit 0x00007fffa66f568d +[NSWindow(NSWindowResizing) _mouseHysteresisCheck:withExpiration:andDistance:finalMouseLocation:] + 525
11 com.apple.AppKit 0x00007fffa65eedb5 -[NSWindow(NSWindowResizing) _hitTestWithHysteresisCheck:forEvent:allowWindowDragging:] + 394
12 com.apple.AppKit 0x00007fffa6c8f0db -[NSWindow(NSEventRouting) _handleMouseDownEvent:isDelayedEvent:] + 1873
13 com.apple.AppKit 0x00007fffa6c8ca6c -[NSWindow(NSEventRouting) _reallySendEvent:isDelayedEvent:] + 1942
14 com.apple.AppKit 0x00007fffa6c8bf0a -[NSWindow(NSEventRouting) sendEvent:] + 541
15 org.libsdl.SDL2 0x000000010d46d74a -[SDLWindow sendEvent:] + 90
16 com.apple.AppKit 0x00007fffa6b10681 -[NSApplication(NSEvent) sendEvent:] + 1145
17 org.libsdl.SDL2 0x000000010d46532b -[SDLApplication sendEvent:] + 139
18 org.libsdl.SDL2 0x000000010d466b2f Cocoa_PumpEvents + 495
19 org.libsdl.SDL2 0x000000010d44c1d5 SDL_PumpEvents_REAL + 53
20 org.libsdl.SDL2 0x000000010d44c2f5 SDL_WaitEventTimeout_REAL + 53
21 org.libsdl.SDL2 0x000000010d44c2b7 SDL_PollEvent_REAL + 23
22 org.libsdl.SDL2 0x000000010d51bb24 SDL_PollEvent + 36
23 libTest.dylib 0x000000010cf3e0e8 SDLEventProcessor::processEvents(int) + 568
24 Test 0x000000010cde6bba BrowserApp::RunAppMessageLoop(BAInstData*, CefStringBase, CefStringBase) + 810
25 Test 0x000000010ce04bbc main + 17980
26 libdyld.dylib 0x00007fffbe016235 start + 1
I further noticed that while entering full screen in SDL_cocoawindow.m NSResizableWindowMask is set. If I clear it inside windowDidEnterFullScreen, then, the issue doesn't repro.
This is discussed at https://discourse.libsdl.org/t/main-thread-gets-stuck-on-left-mouse-down/22753/3 and thanks to Eric for the pointers.
The Xlib documentation demands that 32-bit values here be passed in a long,
even when long itself isn't a 32-bit value. Otherwise libx11 might read
memory incorrectly.
Fixes Bugzilla #3692.
This only affects Wayland and DirectFB, as a Unix system generally has X11
support. Other platforms also have different sizes for the C union in
question, but are likely the only target for that platform, etc.
Apps that might run on Wayland or DirectFB will need to be compiled against
new headers from an official 2.0.6 release, or be prepared to force the x11
target, or not use SDL_GetWindowWMInfo().
Fixes Bugzilla #3428.
