Simon Hug
There are currently three entry points in the SDL2_main code for windows: main, wmain and WinMain. Only the latter two properly convert the arguments to UTF-8.
Console applications linked with MSVC will always link with the main entry point (wmain has to be selected by manually setting the entry point). This makes it likely that such programs will not have proper unicode arguments.
Sylvain
After a long time, I found out more clearly what was going wrong.
The native libraries should be built with a "APP_PLATFORM" as low as possible.
Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml
So that the application never runs on a lower APP_PLATFORM than it has been built for.
An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10
(If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10.
And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".)
to precise what happened in the initial reported test-case:
Let say the "c" code contains a call to "srand()".
with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()".
with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()".
but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()).
So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10.
That was the issue. The path tried to fix this by in fact always calling srand48().
SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform.
It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions.
Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
Robert Folland
When running this little test program with SDL2 on Wayland it often crashes in SDL_Init.
From a backtrace it is apparent that there is a race condition in creating a xkb_context_ref. Sometimes it is 0x0.
By moving the relevant lines higher up in Wayland_VideoInit (in SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302) this seems to get fixed.
I moved the call to WAYLAND_xkb_context_new() up to before the call to WAYLAND_wl_display_connect().
Here is the test program (just a loop of init and quit), and a backtrace from gdb:
#include <cstdio>
#include <stdlib.h>
#include <SDL2/SDL.h>
#include <unistd.h>
#include <iostream>
int main(int argc, char **argv)
{
int count = atoi(argv[1]);
for (int i = 0; i < count; i++) {
std::cout << "Init " << i << std::endl;
if (SDL_Init(SDL_INIT_VIDEO) < 0) {
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
"Couldn't initialize SDL: %s\n",
SDL_GetError());
return 1;
}
std::cout << "Quit" << std::endl;
SDL_Quit();
}
return 0;
}
Init 12
Quit
Init 13
Program received signal SIGSEGV, Segmentation fault.
xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156
156 ctx->refcnt++;
(gdb) bt
#0 xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156
#1 0x00007ffff5e1cd4c in xkb_keymap_new (ctx=0x0, format=XKB_KEYMAP_FORMAT_TEXT_V1, flags=flags@entry=XKB_KEYMAP_COMPILE_NO_FLAGS) at src/keymap-priv.c:65
#2 0x00007ffff5e1c6cc in xkb_keymap_new_from_buffer (ctx=<optimized out>,
buffer=0x7ffff7fd5000 "xkb_keymap {\nxkb_keycodes \"(unnamed)\" {\n\tminimum = 8;\n\tmaximum = 255;\n\t<ESC>", ' ' <repeats 16 times>, "= 9;\n\t<AE01>", ' ' <re
peats 15 times>, "= 10;\n\t<AE02>", ' ' <repeats 15 times>, "= 11;\n\t<AE03>", ' ' <repeats 15 times>, "= 12;\n\t<AE04>", ' ' <repeats 12 times>..., length=48090,
format=<optimized out>, flags=<optimized out>) at src/keymap.c:191
#3 0x00007ffff7b8ea4e in keyboard_handle_keymap (data=0x6169b0, keyboard=<optimized out>, format=<optimized out>, fd=5, size=48091)
at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandevents.c:269
#4 0x00007ffff64501f0 in ffi_call_unix64 () from /usr/lib/libffi.so.6
#5 0x00007ffff644fc58 in ffi_call () from /usr/lib/libffi.so.6
#6 0x00007ffff665be3e in wl_closure_invoke (closure=closure@entry=0x61f000, flags=flags@entry=1, target=<optimized out>, target@entry=0x616d20,
opcode=opcode@entry=0, data=<optimized out>) at src/connection.c:949
#7 0x00007ffff6658be0 in dispatch_event (display=<optimized out>, queue=<optimized out>) at src/wayland-client.c:1274
#8 0x00007ffff6659db4 in dispatch_queue (queue=0x617398, display=0x6172d0) at src/wayland-client.c:1420
#9 wl_display_dispatch_queue_pending (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1662
#10 0x00007ffff665a0cf in wl_display_roundtrip_queue (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1085
#11 0x00007ffff7b8faa0 in Wayland_VideoInit (_this=<optimized out>) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302
#12 0x00007ffff7b7aed6 in SDL_VideoInit_REAL (driver_name=<optimized out>, driver_name@entry=0x0) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/SDL_video.c:513
#13 0x00007ffff7ae0ee7 in SDL_InitSubSystem_REAL (flags=16416) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/SDL.c:173
#14 0x0000000000400b24 in main (argc=2, argv=0x7fffffffebb8) at vplay-init.cpp:13
(gdb)
Eric wing
Sometimes an SDL_assert triggers at RPI_WarpMouseGlobal
src/video/raspberry/SDL_rpimouse.c:232 'update'.
It doesn't always reproduce, but it seems to happen when you really bog down the system and the event loop can't update for awhile.
The first time I hit this, I wasn't even using the mouse. I don't call any warp mouse functions either.
I can usually reproduce with a simple program that runs an expensive blocking CPU series of functions which blocks the main loop until complete (can be up to 10 seconds).
Sometimes this assertion gets triggered after that. I'm not sure if
they are related or coincidental.
Disabling the SDL_asserts when compiling SDL will avoid this problem. I actually haven't seen any problems with the mouse when I do this.
On a Raspberry Pi 2 running Raspbian Jessie.
Call SDL_GL_GetDrawableSize() directly because we may be in the initialization path and SDL_GetRendererOutputSize() will fail because the renderer magic isn't set up yet.
Daniel Gibson
Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR.
SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.
Apparently some systems see "hw:", some see "default:" and some see
"sysdefault:" (and maybe others!). My workstation sees both "hw:" and
"sysdefault:" ...
Try to find a prefix we like and prioritize the prefixes we (think) we want
most. If everything else fails, if there's a "default" (not a prefix) device
name, list that by itself so the user gets _something_ here.
If we can't find a prefix we like _and_ there's no "default" device, report
no hardware found at all.
Weitian Leung
Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too),
enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
x414e54
Wayland will sometimes send empty resize events (0 width and 0 height) to the client. I have not worked out the exact conditions a client would receive these but I can assume it might be if the window is offscreen or not mapped yet.
This causes issues with some SDL clients as they receive the 0x0 event and unexpected resize event or might not request to resize back to the correct size.
As per the wl_shell Wayland spec configure events are only a suggestion and the client is free to ignore or pick a different size (this is how min/max and fixed aspect ratio is supped to be implemented).
A patch is attached but is just the first iteration and I will fix any issues such as checking for FULLSCREEN/MAXIMIZED or RESIZABLE flags unless someone else fixes this first.
I have update to take into account non resizable and fullscreen windows. Also adding in maximize/restore and title functions for Wayland.
Darren Kulp
The dummy video driver is not available on Mac OS X if SDL_VIDEO_OPENGL is set at library compilation time.
In src/video/SDL_video.c, there is a compile-time check in SDL_CreateWindow() for (SDL_VIDEO_OPENGL && __MACOSX__). When it succeeds, SDL_WINDOW_OPENGL is always requested. Since the dummy video driver does not supply an OpenGL implementation, the error "No OpenGL support in video driver" is supplied to the user, and SDL_CreateWindow() is exited early.
Adam M.
When doing a rotated texture copy with the software renderer, where the angle is a multiple of 90 degrees, one or two edges of the image get cut off. This is because of the following line in sw_rotate.c:
if ((unsigned)dx < (unsigned)sw && (unsigned)dy < (unsigned)sh) {
which is effectively saying:
if (dx >= 0 && dx < src->w-1 && dy >= 0 && dy < src->h-1) {
As a result, it doesn't process pixels in the right column or bottom row of the source image (except when they're accessed as part of the bilinear filtering for nearby pixels). This causes it to look like the edges are cut off, and it's especially obvious with an exact multiple of 90 degrees.
