Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver
PS4 and PS5 controllers use AUX1 to represent the touchpad button
Nintendo Switch Pro controllers use AUX1 to represent the capture button
- SDL_config.h.in: add missing defines SDL_SENSOR_COREMOTION
and SDL_SENSOR_WINDOWS (configure did set SDL_SENSOR_WINDOWS
but it never went in SDL_config.h or Makefile.)
- SDL_config.h.cmake: remove duplicated SDL_SENSOR_XXX cmake
defines.
- autofoo, cmake: check for sensorsapi.h header before enabling
windows sensors.
Add hint SDL_HINT_ANDROID_BLOCK_ON_PAUSE_PAUSEAUDIO not to pause audio when
the app goes to background.
(It requires SDL_ANDROID_BLOCK_ON_PAUSE as "Non blocking")
that are mapped to it and automatically invalidate them when it is freed
- refcount is kept so that an external application can still create a reference
to SDL_Surface.
- lock_data was un-used and is now renamed and used as a list keep track of the blitmap
"In the second half of 2021, new apps will be required to publish with the Android App Bundle on Google Play"
(see https://developer.android.com/guide/app-bundle)
And "Android App Bundles don't support APK expansion (*.obb) files".
Rainer Deyke
While most of the KMOD_* flags are enums, the combination flags KMOD_CTRL, KMOD_ALT, KMOD_SHIFT and KMOD_GUI are defined as macros. This breaks third-party code that uses these KMOD_* names for local identifiers, such as OGRE. The correct thing to do is to make them all enums.
For systems without strlcpy and strlcat, just declare them as if they exist;
the analyzer possibly still knows the details of these functions and can
utilize that in its analysis.
Most of this patch was from meyraud705 at gmail and Martin Gerhardy. Thanks!
Fixes Bugzilla #5163.
Ellie
I just tripped over this: stb_image when requesting 3 channels with 8-bit actually returns them as 3 bytes per pixel with no alignment, so basically 4 pixels are 12 bytes with no padding (0...2, 3...5, 6...8, and 9...11). This I would have naively expected to be called RGB888 or BGR888, since there is no "dead" unused byte as I would expect for something called e.g. RGBX8888.
However, SDL2's SDL_PIXELFORMAT_BGR888 uses 4 bytes, same as SDL_PIXELFORMAT_BGRX8888, even though the latter appears to be a longer storage format - which it isn't, internally. It's just swapped, in byte order X, B, G, R (instead of BGRX). So why isn't the macro name also swapped, as "XBGR888" instead of just "BGR888"?
I find the formats therefore named inconsistently, and unless there is a reason for this I suggest these changes:
1. deprecate SDL_PIXELFORMAT_BGR888 in favor of a new SDL_PIXELFORMAT_XBGR8888
and
2. deprecate SDL_PIXELFORMAT_RGB888 in favor of a new SDL_PIXELFORMAT_XRGB8888
1. Comment that SDL_SetThreadPriority will make any necessary system changes when applying priority.
2. Add a hint to override SDL's default behavior for scheduler policy.
3. Modify the pthreads SDL_SetThreadPriority so that instead of just using the current thread scheduler policy it will change it to a policy that should work best for the requested priority.
4. Add hint checks in SDL_SetThreadPriority so that #3 can be overridden if desired.
5. Modify the Linux SDL_SetThreadPriority so that in the case that policy, either by SDL defaults or from the hint, is a realtime policy it uses the realtime rtkit API.
6. Prior to calling rtkit on Linux make the necessary thread state changes that rtkit requires. Currently this is done every time as it isn't expected that SDL_SetThreadPriority will be called repeatedly for a thread.
wengxt
Due to the new major fcitx version is coming close, the existing code need to be ported to use new Fcitx dbus interface.
The new dbus interface is supported by both fcitx 4 and 5, and has a good side effect, which is that it will work with flatpak for free. Also the patch remove the dependency on fcitx header. Instead, it just hardcodes a few enum value in the code so need to handle the different header for fcitx4 or 5.
meyraud705
I see how the documentation is confusing. I think that the choice of the axis is an implementation detail. The documentation should state the goal of this value, so I propose this wording:
"Use this value to play an effect on the steering wheel axis. This provides
better compatibility across platforms and devices as SDL will guess the
correct axis."
Value could even be renamed 'SDL_HAPTIC_STEERING_AXIS'.
For Linux, sending an effect on the X axis with a Logitech wheel works. Others brands don't have driver for Linux as far as I know.
This is only supported on PulseAudio. You can set a description when opening
your audio device that will show up in pauvcontrol, which lets you set
per-stream volume levels.
Fixes Bugzilla #4801.
This driver supports the Razer Atrox Arcade Stick
Some of the quirks of this driver, inherent in Windows Gaming Input:
* There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers.
* You can't read the state of the guide button
* You can't get controller events in the background
Caleb Cornett
Just ran into this, and from my testing, whatever re-added the dependency is a _major_ regression. Not only is your app forced to link with CoreBluetooth, but iOS has apparently tightened up security and won't even let you _test_ your app unless it specifies the NSBluetoothAlwaysUsageDescription in an Info.plist. It doesn't even pop up an error message, it just straight up crashes.
Adding the permission isn't a good solution either, since I'd really, really rather not have my app request users' bluetooth to always be enabled, especially if the only apparent reason is for Steam Controller support.
Caleb Cornett's comments:
"A few weeks ago, Alex added a partial Metal API to SDL2:
https://hg.libsdl.org/SDL/rev/22c8e7cd8d38
I noticed it was missing a few features that would help Metal become a
first-class citizen in SDL, so I went ahead and wrote them! Here are the new
APIs:
1. SDL_WINDOW_METAL flag for SDL_CreateWindow(). This allows the programmer
to specify that they intend to create a window for use with SDL_MetalView.
The flag is used to ensure correct usage of the API and to prevent
accidentally defaulting to OpenGL on iOS.
2. SDL_Metal_GetLayer(). This function takes a SDL_MetalView and returns a
pointer to the view's backing CAMetalLayer. This simplifies things
considerably, since in the current version of the SDL_Metal API the
programmer is required to bridge-cast a SDL_MetalView handle to an NSView or
UIView (depending on the platform) and then extract the layer from there.
SDL_Metal_GetLayer automatically handles all of that, making the operation
simple and cross-platform.
3. SDL_Metal_GetDrawableSize(). This function already exists in the current
SDL_Metal API (and is used behind-the-scenes for SDL_Vulkan_GetDrawableSize
on Apple platforms) but was not publicly exposed. My patch exposes this
function for public use. It works just like you'd expect.
Tested on macOS 10.14 and iOS 12.4."
Fixes Bugzilla #4796.
