buildroot/board/grinn/chiliboard/readme.txt

47 lines
1006 B
Plaintext

**********
chiliBoard
**********
Build
=====
First, configure Buildroot for your chiliBoard:
make grinn_chiliboard_defconfig
Build image:
make
After building you should get a tree like this:
output/images/
├── am335x-chiliboard.dtb
├── boot.vfat
├── MLO
├── rootfs.ext2
├── rootfs.ext4
├── rootfs.tar
├── sdcard.img
├── u-boot.img
└── zImage
Create a bootable microSD card
==============================
Buildroot prepares a bootable microSD card image "sdcard.img" in output/images/
directory, To flash SD card just run the following command:
sudo dd if=output/images/sdcard.img of=/dev/<sd_card> bs=1M
where <sd_card> can be sdX or mmcblkX
*** WARNING! This will destroy all contents of device you specify! ***
Boot chiliBoard
===============
- insert the microSD card in the microSD slot of the board;
- plug micro USB cable to provide power and console interface
- use terminal emulator with 115200 bps, 8n1