Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from atfirmware to arm-trusted-firmware, in order
to match upstream.
- Remove option to apply custom patches. We no longer add such options,
and use the global patch directory instead.
- Rename the repo URL/version options, in order to not be Git specific,
in case support for fetching from other VCS is added later. This is
consistent with how other bootloaders handle this.
- Add license information.
- Do not add a weird dependency on the vexpress-firmware package in
Config.in. Instead, simply use it if it's available. Of course, some
configurations (such as the juno configuration) will fail to build if
vexpress-image is not enabled, but it's the responsibility of the
user to create a config that builds.
- Simplify misc aspects in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the SCP (System Control Processor)
firmware for the ARM reference platforms. There will most likely be
other SCP firmware provided by other vendors, but they might be provided
in a different form, so we for now create a vendor-specific package
named vexpress-firmware.
Since this firmware is used for booting, we create the package in boot/
and not in package/.
The package simply installs a single pre-built binary file into the
images directory.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from scpfirmware to vexpress-firmware.
- Add a Config.in prompt for the package.
- Remove the prompt-less Config.in options to select the Git repo and
version. Since we only support the Vexpress firmware, there's no need
for configurability here, so we just use the right Git repo/version
in the .mk file.
- Use $(INSTALL) -D to install the firmware file.
- Add license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash file, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This MBR routine is based on TS' original bootloader. It is loaded by
the bootrom stored in the companion FPGA, and chainloads an executable
located at the beginning of the first non-fs (0xda) partition.
Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
[Thomas:
- add hash file.
- install image in INSTALL_IMAGES_CMDS instead of
INSTALL_TARGET_CMDS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the first level bootloader for the Actions Semiconductor S500 SoC,
which is used on boards like Roseapple Pi and LeMaker Guitar.
The bootloader performs basic configuration and chain loads u-boot for
futher setup.
This bootloader is unfortunately only available as a binary blob. It gets
configured for a specific board using a binary (32bit x86) tool based on a
.ini file (somewhat similar to sunxi .fex).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a _very_ small bootloader for STM32 platforms.
At submission afboot-stm32 supports the following boards:
stm32429i-eval
stm32746g-eval
stm32f429i-disco
stm32f469i-disco
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix commit title, add dependency on BR2_arm.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boot wrapper contains both a minimal bootloader and a tool to
generate an image suitable for execution by the AArch64 software
simulator. The image generated embeds the minimal bootloader, the
kernel image, the Device Tree Blob and the kernel command line.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that this new package, at91bootstrap3, is being added alongside the
existing at91bootstrap. This was suggested by Thomas Petazzoni, whose
comments on the mailing list are quoted below.
For this package, I am not sure we can do a simple version bump. Since
there is (was?) no upstream for AT91Bootstrap 1.x, many
vendors/companies had to maintain their patches on top of AT91Bootstrap
1.x. See for example
board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch. Therefore,
removing AT91Bootstrap 1.x from the tree will prevent those platforms
to work. I know people should upgrade, but AT91Bootstrap 3.x is quite
significantly different, so the porting effort is not that simple.
Therefore, I'm wondering whether we should kee at91bootstrap as it is,
and create a separate package at91bootstrap3 for the 3.x generation.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MXS platforms (imx23 and imx28) are relying on bootlets as their first
stage bootloaders, that can then either start a regular second stage
bootloader or directly a Linux kernel. However, the Makefile allows
only to build u-boot and linux images at the same time, which is
not very convenient as we will more likely use only one of them,
so we need to duplicate a bit what is already done so that we are able
to choose what we want to generate.
thomas.petazzoni@free-electrons.com:
* Remove incorrect dependency on BR2_PACKAGE_ELFTOSB
* Each board configuration option is for one board, not multiple
boards, so use singular.
* The i.MX28 support is for i.MX28 EVK only, reflect that in the
option prompt and the option name.
* Use 'generic-package' instead of GENTARGETS
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will build kickstart and s1l for the selected board and install
them alongside u-boot.
Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
merge xloader
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This will allow to match the currently Config.in option
BR2_TARGET_UBOOT, in order to make it easy to integrate U-Boot into
the package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Grub 2 has been marked BROKEN in June 2010, and nobody cared to fix it
since then.
At that time, it was marked broken because the build process needed a
Ruby interpreter available on the host, and it's really a pain that
building a bootloader needs such a thing.
I've tried to upgrade the package to Grub2 1.99-rcX, and now it does
not need a Ruby interpreter anymore, but instead requires a tool
called "autogen", which itself needs the Guile Scheme interpreter.
Since we haven't heard any complaints about Grub2 being marked broken,
and since it's such a pain to package, let's get rid of it. Of course,
anybody interested in Grub2 is invited to contribute a working
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Yaboot does not build, hasn't been updated since a long time, and
isn't very common these days on embedded PowerPC platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Joao Pinto
Patrick Keroulas
Peter Korsgaard
Lee Jones
Thomas Petazzoni
Jerzy Grzegorek
Simon Dawson
Maxime Ripard
Alexandre Belloni
Philippe Reynes