Ulf Samuelsson
d97e32744d
Update atngw100 BSP
2009-01-31 20:43:01 +00:00
Ulf Samuelsson
78491a711d
Update at91sam9263ek BSP
2009-01-31 20:42:28 +00:00
Ulf Samuelsson
c8ce0bed9e
defconfig using binary toolchain
2009-01-31 20:41:36 +00:00
Ulf Samuelsson
ba7113b7f2
defconfig for arm toolchain
2009-01-31 20:41:00 +00:00
Peter Korsgaard
c4cd1bcb84
grub: revert r21974 (features.h should never be included explicitly)
...
features.h (or something including it) is needed for __UCLIBC* to get
defined - E.G. without that the build breaks without largefile support.
Nigel, what was the reason for your commit and what file not found error
did you see?
2009-01-31 12:30:02 +00:00
Peter Korsgaard
2b3ad678ff
grub: fix build
...
Revert to the -35 debian patch (from stable.debian.net) so the other
patches apply, E.G. effectively revert r23968.
Someone who actually uses grub should probably look into updating our
version.
2009-01-31 12:29:55 +00:00
Ulf Samuelsson
c1e444ff72
Remove AVR32 patches from kernel-headers directory and put them in
...
"target/device/Atmel/arch-avre/kernel-headers-2.6.28.2"
Make sure BR2_KERNEL_HEADERS_PATCH_DIR is enabled for 2.6.28
Set
KERNEL_HEADERS_PATCH_DIR="target/device/Atmel/arch-avre/kernel-headers-2.6.28.2"
for Atmel AVR32 targets and "valka"
2009-01-30 18:39:03 +00:00
Peter Korsgaard
0c54ef9c9a
target/linux/Makefile.in.advanced: get rid of BUILDROOT_USE_XWINDOWS
...
As discussed on the list.
2009-01-30 14:41:04 +00:00
Peter Korsgaard
acc182cea2
target/Config.in.arch: fix ARM abi setting
...
Reported by Sven Neumann and based on 7f7aac5d3 in Bernhard's tree.
2009-01-30 11:35:04 +00:00
Peter Korsgaard
a72794391a
readline: s/BR2_READLINE/BR2_PACKAGE_READLINE/
...
Package configs should start with BR2_PACKAGE_.
2009-01-30 09:54:59 +00:00
Ulf Samuelsson
c528189f96
Move AVR32 patch to kernel header to unbreak several applications
2009-01-30 08:53:08 +00:00
Ulf Samuelsson
0effa31366
Update some comments, which will cause defconfig to wait for input
2009-01-29 23:32:06 +00:00
Ulf Samuelsson
4ab2b56d19
Update some comments, which will cause defconfig to wait for input
2009-01-29 23:23:51 +00:00
Ulf Samuelsson
0ed2265be4
Update some comments, which will cause defconfig to wait for input
2009-01-29 23:22:27 +00:00
Ulf Samuelsson
a1e2f48a2c
at91rm9200df defconfig comment update
2009-01-29 23:02:41 +00:00
Ulf Samuelsson
6031f96b50
2.6.23 is not patchable for at91, cleanup some comments
2009-01-29 22:45:55 +00:00
Ulf Samuelsson
9aa7366856
Delete AT91 patches before 2.6.22
2009-01-29 22:40:27 +00:00
Ulf Samuelsson
8a97c4ea19
Cleanup of AT91 patches
2009-01-29 22:33:23 +00:00
Ulf Samuelsson
1a070853d6
Remove some unneeded AT91 patches
2009-01-29 22:11:46 +00:00
Ulf Samuelsson
b389a73cf1
Update at91sam9263ek BSP
2009-01-29 22:00:58 +00:00
Ulf Samuelsson
acaf54afe1
Update at91sam9261ek BSP
2009-01-29 21:54:58 +00:00
Ulf Samuelsson
43036ab968
Update at91sam960dfc BSP
2009-01-29 21:47:42 +00:00
Ulf Samuelsson
495d0d69f0
Update at9sam9g20dfc BSP
2009-01-29 21:37:29 +00:00
Ulf Samuelsson
38986e2cc2
Cleanup AT91 board support
2009-01-29 21:29:19 +00:00
Ulf Samuelsson
6087c68fe5
Clean up at91bootstrap
2009-01-29 21:28:57 +00:00
Ulf Samuelsson
f8cdfdaada
Update at91rm9200df BSP
2009-01-29 21:27:51 +00:00
Ulf Samuelsson
3a7e2fd783
Remove default value from choice in x86 config
2009-01-29 21:17:36 +00:00
Ulf Samuelsson
b31e63aaf1
Remove obsolete at91bootstrap patches
2009-01-29 20:52:52 +00:00
Ulf Samuelsson
ad54aa3ba7
Clean up AVR32 Linux support for atngw100, atstk100x and atstk1005
...
The boards now support 2.6.27.13 as default
There are configs for 2.6.28.2, but this patch is marked (experimental)
Configuration options for no longer existing patches are removed
(AC-97,ISI and PS2-I/F)
2009-01-29 20:51:05 +00:00
Ulf Samuelsson
010a1acb23
Clean up ARM Ltd. BSP
2009-01-29 20:10:23 +00:00
Ulf Samuelsson
9d58dd7384
Update x86 BSP to latest uclibc/linux/tools versions
2009-01-29 19:25:24 +00:00
Ulf Samuelsson
37ae66f462
Clean up x86 support
2009-01-29 17:52:39 +00:00
Ulf Samuelsson
7f44fb1ae2
Clean up ARM Ltd BSP
2009-01-29 17:41:36 +00:00
Ulf Samuelsson
e5fbca8e8f
Remove Via BSP which only provide support for linux-2.4
2009-01-29 17:26:08 +00:00
Ulf Samuelsson
80aa788939
Remove Soekris BSP which only provide support for linux-2.4
2009-01-29 17:23:35 +00:00
Ulf Samuelsson
c73c1193f3
Remove jp BSP which only provide support for linux-2.4
2009-01-29 17:22:49 +00:00
Ulf Samuelsson
7785182e46
Remove Hitachi BSP, does not do ANYTHING except providing a differernt uClibc configuration for an obsolete version
2009-01-29 17:22:10 +00:00
Ulf Samuelsson
2f1eb9e4b8
Remove unneeded ARM architecure patch, just a clone of SAM9260 support
2009-01-29 17:21:16 +00:00
Peter Korsgaard
83e903468c
target/device: remove obsolete Sharp/LNode80 platform
...
As discussed on the list and requested on irc:
< prpplague> Jacmet: hey, just wanted to drop a note to confirm that the
LNode80 can be removed, we never went into full scale
production of it, only 20 were ever made
2009-01-29 17:05:12 +00:00
Ulf Samuelsson
a77bf1ecde
Update atstk100x BSP
2009-01-29 09:33:25 +00:00
Ulf Samuelsson
b47232e869
Add AVR32 support for linux-2.6.28.2
2009-01-29 09:32:45 +00:00
Ulf Samuelsson
6653646d66
Update at91rm9200df BSP
2009-01-27 06:05:15 +00:00
Ulf Samuelsson
0dbf9dd7ab
Create a common BR2_COPYTO to prepare to replace
...
all the different COPYTOs spread out all over
Buildroot.
Generate COPY_FILE subroutine which can be used
to copy a file.
$(COPY_FILE , file, directory, filename)
This will copy to binary dir and to the selected
copy dir if set in new config (intended to replace
all old COPYTO configs)
This is overridden by BUILDROOT_COPYTO,
if set into the environment.
2009-01-26 23:52:31 +00:00
Ulf Samuelsson
78fa0d4eb4
Update at91sam9260dfc BSP
2009-01-26 21:19:05 +00:00
Peter Korsgaard
87c5abadfa
target/device/Atmel/arch-avr32: remove old unused kernel patches
...
As discussed on the list:
22:08 < HcE> Jacmet: so yes, AVR32 wise you can delete anything older than
2.6.27
2009-01-26 21:10:11 +00:00
Ulf Samuelsson
8586be28d4
Replace BUILDROOT_KERNEL_CONFIG_METHOD environment variable with BUILDROOT_USE_XWINDOWS
2009-01-26 20:17:06 +00:00
Peter Korsgaard
d2c6e22040
linux/advanced: default to make menuconfig
2009-01-26 16:25:17 +00:00
Peter Korsgaard
7f4cb62a1b
u-boot: halt build early with description if no u-boot board name is set
2009-01-26 14:49:19 +00:00
Peter Korsgaard
3bab463be4
u-boot: clean up after Ulf
...
As discussed on the list.
2009-01-26 14:49:00 +00:00
Peter Korsgaard
6218173ce2
u-boot: mark 2008.10 version as recent
2009-01-26 14:04:10 +00:00
Ulf Samuelsson
377773e2f7
Fix erronous mkimage target
2009-01-26 11:46:44 +00:00
Ulf Samuelsson
f529db89db
Revert bad patch to fix linux rebuild problem
2009-01-26 10:38:00 +00:00
Ulf Samuelsson
86c392e504
Update patchlevels for linux-2.6.25/27/28
2009-01-25 23:42:09 +00:00
Ulf Samuelsson
147b034d0d
Ensure /boot exists, Write linux version to file,in case the kernel version has changed after the first build
2009-01-25 23:14:55 +00:00
Ulf Samuelsson
4374b75504
Revert Atmel boards back to desired operation
2009-01-25 21:53:14 +00:00
Ulf Samuelsson
9f20b5f97f
Use new SHELL variable BUILDROOT_KERNEL_CONFIG_METHOD
...
which will override selection between xconfig and menuconfig
make xconfig will, if it fails, or user does not save configuration
result in make menuconfig beeing tried
Fix several issues causing final part of linux to be regenerated
on each make.
2009-01-25 21:48:33 +00:00
Ulf Samuelsson
4f081d489d
Update at91sam9261ek BSP
2009-01-25 21:01:33 +00:00
Peter Korsgaard
7e41b89b56
target/linux-advanced: default to menuconfig for all archs
...
Default to menuconfig for atmel targets as well, mention QT3 dependency
for make xconfig and update affected defconfigs.
2009-01-25 20:11:31 +00:00
Ulf Samuelsson
d661484784
Add linux config for at91sam9261ek
2009-01-24 10:23:00 +00:00
Ulf Samuelsson
f5371f72f3
Update at91sam9260dfc BSP
2009-01-24 10:16:53 +00:00
Peter Korsgaard
7b981dbf06
Revert r24952 (BR2_TARGET_TEST_PACKAGES)
...
As discussed on the list. It is already out of date
(BR2_TARGET_UBOOT_2009_01_RC3, BR2_PACKAGE_RAIDTOOLS), is the wrong solution
and breaks the make allyesconfig; make menuconfig / sed workflow.
2009-01-23 20:45:30 +00:00
Ulf Samuelsson
9d51c94e35
Bump AT91 u-boot patches to 2009.01
2009-01-23 19:41:42 +00:00
Ulf Samuelsson
ce6ecb3b0a
Update at91sam9263ek BSP
2009-01-23 18:05:25 +00:00
Ulf Samuelsson
501c007158
Do not reapply linux patches if LINUX26_PATCH_SOURCE is empty, and we are continuing building after a failure
2009-01-23 00:54:23 +00:00
Ulf Samuelsson
6f39a7c62e
Update AT91 u-boot patches to 2009.01
2009-01-22 23:09:41 +00:00
Ulf Samuelsson
e4c96c2d26
Use latest u-boot as default
2009-01-22 18:46:00 +00:00
Peter Korsgaard
5f1fb36aa3
u-boot: add 2009.01, remove -rc3
2009-01-22 10:11:09 +00:00
Ulf Samuelsson
6fd0d36d32
Add simple way to enable most (but not all) targets for testing purposes
2009-01-22 07:53:24 +00:00
Ulf Samuelsson
2f4722048b
Fix AVR32 u.boot build bug
2009-01-22 07:39:12 +00:00
Peter Korsgaard
a5e5bdd51b
u-boot: unbreak target tools
...
Got broken by r24697.
2009-01-21 15:49:06 +00:00
Ulf Samuelsson
8a97f125ab
U_BOOT_ARCH_PATCH_DIR should contain a value or should not be defined, empty string is not allowed
2009-01-20 08:11:26 +00:00
Ulf Samuelsson
5a46761446
Bump u-boot to -2009.01-rc3, and add possibility to apply the arch-at91 patches if using an at91
2009-01-19 22:42:03 +00:00
Ulf Samuelsson
b71c76a10a
Fix some bugs in advanced linux configuration, remove some arbitrary combinations of major/minor directly supported, general cleanup
2009-01-19 21:27:04 +00:00
Peter Korsgaard
675b479c2f
Kconfig: remove 'default n' and 'default no' (see r22874)
...
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
2009-01-18 14:20:18 +00:00
Ulf Samuelsson
bdac3e337f
Update broken AVR32 toolchain, and update configs for this, deprecate all but latest AVR32 toolchain
2009-01-16 22:39:05 +00:00
Peter Korsgaard
3ff43a6838
buildroot: convert remaining WGET users to DOWNLOAD helper
2009-01-16 12:07:53 +00:00
Peter Korsgaard
ed5f6093c0
target/: convert to DOWNLOAD helper
2009-01-16 11:48:43 +00:00
Peter Korsgaard
d58636d765
buildroot: add BR2_BACKUP_SITE and DOWNLOAD helper
...
This is the long requested backup mirror support. So far only enabled
for Makefile.autotools.in, but there's no reason why we cannot use
DOWNLOAD everywhere.
Notice, I'm still syncing http://buildroot.uclibc.org/downloads/sources/
2009-01-16 10:27:48 +00:00
Peter Korsgaard
2b893123a5
BR2_PRIMARY_SITE: move to Mirrors and Download locations menu
2009-01-16 10:27:39 +00:00
Ulf Samuelsson
63e0cdb206
Update kernel snapshot version
2009-01-15 23:19:28 +00:00
Ulf Samuelsson
3f8d9b275f
Update at91sam9263ek BSP
2009-01-13 18:45:19 +00:00
Peter Korsgaard
a81367744f
buildroot: mark alpha as broken
...
It still doesn't build with threading + shared libs disabled
2009-01-13 15:14:21 +00:00
Peter Korsgaard
8161c45b89
buildroot: mark ia64, m68k, nios2, sparc and sparc64 as broken
...
No sense in showing the architecture options when they cannot even build
the toolchain.
2009-01-12 20:58:54 +00:00
Peter Korsgaard
b2c5b9109e
toolchain: fix cris build with 2.6.28 kernel headers
...
Patch by Hinko Kocevar <hinko.kocevar@cetrtapot.si>
2009-01-12 20:16:16 +00:00
Peter Korsgaard
b24c3215c1
buildroot: get rid of s390 support
...
As discussed on the list. It isn't supported by uclibc, so I strongly doubt
anyone has been using it.
2009-01-12 14:36:14 +00:00
Ulf Samuelsson
e791c63303
Update sam9263EK BSP
2009-01-12 10:25:31 +00:00
Ulf Samuelsson
0fac1d7d4b
Support large sector NAND flash for JFFS2
2009-01-12 00:43:22 +00:00
Ulf Samuelsson
e897b420fb
Update at91bootstrap to 2.10
2009-01-11 21:44:14 +00:00
Ulf Samuelsson
f4431ebb08
Move AT91 patches for u-boot-2009.01-rc1 to device/Atmel/arch-arm/u-boot/2009.01-rc1
2009-01-11 21:42:07 +00:00
Ulf Samuelsson
00a1ff5bc3
Remove premature deprecation of u-boot-1.2.0-atmel
2009-01-11 21:39:54 +00:00
Ulf Samuelsson
41950c0d2d
Update AVR32 uclibc config for 0.9.30
2009-01-11 21:15:46 +00:00
Ulf Samuelsson
83b2a67eec
Update defocnfig for ngw100
2009-01-11 21:15:08 +00:00
Ulf Samuelsson
bd8c8ab095
Add linux-2.6.27.10 config for stk100x
2009-01-11 21:14:17 +00:00
Ulf Samuelsson
06b9e7abe7
Move kernel localversion files to TARGET_DIR/boot
...
to allow packages which assumes that LINUX26_DIR
and the /lib/modules/LINUX_VERSION use
the consistent version numbering to build.
Create a file ".linux-version" containing
the real linux version in $(PROJECT_B UILD_DIR)
to allow packages to read the correct linux version
2009-01-11 20:43:24 +00:00
Ulf Samuelsson
7aa8a5acce
Update at91sam9261ek configs, build completes
2009-01-09 06:31:01 +00:00
Ulf Samuelsson
34b01cc4a1
Make sure U-boot is built, if we do make uImage
2009-01-09 06:30:08 +00:00
Ulf Samuelsson
4ff9d431b8
Update sam9263ek configs, build completes
2009-01-08 23:01:50 +00:00
Ulf Samuelsson
ab5c2cfc03
Linux26 requires "mkimage" from u-boot to be in the PATH
...
if an uImage is to be built for arm, avr32, blackfin and sh.
PATH has therefore been set to have $(STAGING_DIR)/usr/bin
as the first item allowing linux to find mkimage.
This patch will, if an uImage is built, create a "u-boot-toóls"
directory in the PROJECT_BUILD_DIR directory.
$(STAGING_DIR)/usr/bin/mkimage is copied to this directory
and the PATH variable will now include "u-boot-tools"
If an uImage is built, then the linux build will now depend on "u-boot".
2009-01-08 22:58:30 +00:00
Peter Korsgaard
9dd66ff7e9
target/u-boot: more cleanups
...
As discussed on the list.
- No sense in depending on BR2_TARGET_UBOOT when the configurations are
within a if BR2_TARGET_UBOOT conditional.
- n is default, so remove 'default n'
- clarify nested conditionals
2009-01-08 14:58:54 +00:00
Peter Korsgaard
2b75de900b
target/u-boot: cleanup
...
Fix s/Linux/U-Boot/ typo, default to the latest stable version, mark
old versions as deprecated and comment out unreleased version for now.
2009-01-08 14:58:51 +00:00
Ulf Samuelsson
03c16d10e2
Update atngw100 configs, needs patch from Atmel fork for strace to build correctly, otherwise disable strace
2009-01-06 23:02:50 +00:00
Ulf Samuelsson
036f1daaa0
Remove incorrrect dependency on latest minor kernel patch
2009-01-06 23:00:24 +00:00
Ulf Samuelsson
ec2eb199ca
Add PATH to linux build options to allow 'mkimage' to be found. Neccessary for arm,blackfin,sh and avr32 in linux-2.6.28
2009-01-06 21:42:43 +00:00
Ulf Samuelsson
c7b77e5669
Set default kernel to BR2_LINUX26_STABLE, Remove duplicate definion of BR2_KERNEL_CURRENT_VERSION and remove comments from Config.in choices
2009-01-06 21:24:42 +00:00
Ulf Samuelsson
3867e083e1
Update at91sam9260 Board Support Package to linux-2.6.28
2009-01-06 16:42:15 +00:00
Ulf Samuelsson
7e9a5c9500
Update AT91SAM9G20 Board Support to linux-2.6.28
2009-01-06 16:39:17 +00:00
Ulf Samuelsson
c299ec7a8d
Add support for SAM9G20 in at91bootstrap
2009-01-06 16:36:45 +00:00
Ulf Samuelsson
0082e57f16
Add CONFIGs for new commands to at91 parts
2009-01-06 16:24:42 +00:00
Ulf Samuelsson
3ab31f3a6a
Add support for waiting for NFS root server before booting
2009-01-06 16:24:06 +00:00
Ulf Samuelsson
756b2f1f98
Remove patches that should not have been inlcuded in the spimux commit
2009-01-06 16:21:36 +00:00
Ulf Samuelsson
ce5971ecca
Add 'mux' command to control ext mux on at91rm9200dk/ek
2009-01-06 16:17:43 +00:00
Ulf Samuelsson
d6afbb99b4
Add 'led' command to control coloured LEDs
2009-01-06 16:17:15 +00:00
Ulf Samuelsson
b4a6b4eaa4
Remove an extra #endif from u-boot.factory
2009-01-06 16:13:08 +00:00
Ulf Samuelsson
0590b0ff85
Fix some CFG/CONFIG related problems for AT91RM9200 configuration of U-Boot
2009-01-06 16:10:56 +00:00
Ulf Samuelsson
d5e3c2c55a
Use the correct sam9g20 patch for 2009.01-rc1
2009-01-06 16:09:53 +00:00
Ulf Samuelsson
b33e097596
When you set BR2_PACKAGE_LINUX_USE_DEFCONFIG
...
to configure linux using the
make <board>_defconfig
You have to supply the $(BOARD_NAME) variable.
Add this info in the help text for
target/linux/Makefile.in.advanced
----------------
When you do not set BR2_PACKAGE_LINUX_USE_XCONFIG
to configure linux using "$make <XXXX>config
The choices "$make menuconfig" or "$make xconfig"
should not be visible.
Add dependency
2009-01-06 14:40:24 +00:00
Ulf Samuelsson
6bcd872614
Use PROJECT-u-boot-VERSION-DATE.bin as u-boot target
...
Provide link using "u-boot.bin"
Add BR2_TARGET_UBOOT_DEFAULT_ENV config
If this is set, Buildroot will generate
a default environment to allow easy downloading
of the kernel and root file system
Both as compile time data and an autoscript.
Make u-boot depend on $(U_BOOT_TARGETS)
Add "u-boot-autoscript" to U_BOOT_TARGETS if
BR2_TARGET_UBOOT_DEFAULT_ENV is set.
Take kernel name from Linux build.
Use correct ARCH when mkimaging the autoscript.
Do not use TARGET_ATMEL_COPYTO for generic u-boot.
Hide dataflash memory configurations when
different boot memory is used.
2009-01-06 14:16:27 +00:00
Peter Korsgaard
1250acd942
u-boot: unbreak build after r24674
...
Disable broken autoscript handling so the build atleast completes
2009-01-05 16:16:30 +00:00
Peter Korsgaard
62ee161f0d
u-boot: revert U_BOOT_TARGET part of r24646
...
More u-boot build unbreaking. r24646 added U_BOOT_TARGET which uses the
nonexisting BOARDNAME variable, which means that the filename expands
to -u-boot-*, confusing ln.
There's limited point in having that symlink in the first please, so simply
revert that hunk.
2009-01-05 16:12:34 +00:00
Peter Korsgaard
f7870ba027
u-boot: unbreak build after r24646
...
Unset variables aren't the same as "".
2009-01-05 15:52:44 +00:00
Peter Korsgaard
585aca9a5a
add .empty files for git-svn
...
git-svn (and git) doesn't handle empty directories, so add .empty files
to those dirs like elsewhere in buildroot.
Those empty directories are normally not a big deal, but the recent changes
to u-boot broke the build.
2009-01-05 15:47:00 +00:00
Ulf Samuelsson
2d696140c2
Allow use of uClibc-0.9.30 for AVR32 toolchain
2009-01-03 16:25:47 +00:00
Ulf Samuelsson
cc30201f47
Update target/device/Atmel/*/Makefile.in
...
------------------------------------------
Replace $(BOARDNAME)_PATH with BOARD_PATH
Set U-Boot targets for 1.2.0-atmel as well as 2009.01-rc1
Remove hardwiring of BusyBox configuration files.
Remove older BusyBox configuration files
Remove "at91sam9260dfc-linux-2.6.28-rc6.config" from at91sam9g20dfc directory
Update "at91rm9200df_defconfig"
Add "at91rm9200df-linux-2.6.28.config"
Update "at91sam9260dfc_defconfig"
2009-01-03 16:10:50 +00:00
Ulf Samuelsson
c7066b1807
Generate an autoscript for configuring u-boot in $(BINARIES_DIR)
...
mkimage the autoscript to autoscript.$(PROJECT)-
Move build of u-boot-1.2.0-atmel to target/u-boot
Only visible for AT91 targets.
Fetch prepatched 1.2.0-atmel tarball from $(BR2_ATMEL_MIRROR)
Rest from normal location.
Introduce U_BOOT_CONFIGURE_OPTS
Set to NOSOFT_FLOAT for u-boot-1.2.0-atmel
Disable target/device/Atmel/u-boot
Keep files in target/device/Atmel/u-boot during a test period.
Files:
M target/device/Atmel/Makefile.in
M target/device/Atmel/Config.in
M target/u-boot/Makefile.in
M target/u-boot/Config.in
A target/u-boot/1.2.0-atmel
2009-01-03 15:50:38 +00:00
Nigel Kukard
98eefe7074
Fixed missing "
2009-01-03 15:03:16 +00:00
Ulf Samuelsson
4eb79e2732
Update linux versions
2009-01-03 01:06:36 +00:00
Ulf Samuelsson
d2485586b9
Fix remaining 'butterfinger' issue
2009-01-03 00:40:02 +00:00
Ulf Samuelsson
5dec4da010
Remove debugging variable added to svn by mistake, (Thanks Pter)
2009-01-03 00:07:25 +00:00
Ulf Samuelsson
7213dae7a5
Add support for at91sam9g20 to U-Boot
2009-01-03 00:06:13 +00:00
Ulf Samuelsson
fc6be2d970
Add facilities for installing u-boot in different locations
2009-01-03 00:05:42 +00:00
Ulf Samuelsson
f563fc9565
Provide factory default command to u-boot, using Buildroot variables
2009-01-03 00:04:55 +00:00
Ulf Samuelsson
75c6381110
Fix issue with AT91/AVR32 Ethernet MACB
2009-01-03 00:04:14 +00:00
Ulf Samuelsson
ff9b66d5d0
Add X-Modem tools for minicom to u-boot allowing easy downloading of U-Boot
2009-01-03 00:03:31 +00:00
Ulf Samuelsson
b00e4bf529
Add Memory configration to u-boot (Config.in) and remove comments from 'choice's', Rearrange options for clarity
2009-01-03 00:02:07 +00:00
Ulf Samuelsson
e074c38220
Add Memory configuration to U-Boot build, remove some debugging info
2009-01-03 00:00:46 +00:00
Ulf Samuelsson
abda401711
Support AT91 in vanilla U-Boot
2009-01-02 11:18:09 +00:00
Ulf Samuelsson
e195cb19f2
Update at91sam9260dfc BSP
2009-01-02 08:32:25 +00:00
Peter Korsgaard
69f8592407
buildroot: set SHELL instead of messing around with CONFIG_SHELL
...
Simply set SHELL to bash instead of adding CONFIG_SHELL to all shell
invocations. CONFIG_SHELL is still set, as it is used by kconfig.
2009-01-01 21:20:35 +00:00
Nigel Kukard
33b846773a
* Added "generic" option to x86_64 target
...
- Default to generic and not core2
2009-01-01 17:48:06 +00:00
Ulf Samuelsson
3de57c4447
Update kernel patch from 2.6.28-rc6 to 2.6.28
2008-12-30 08:26:51 +00:00
Ulf Samuelsson
e2ba403798
Use correct filename for patch
2008-12-29 15:13:32 +00:00
Ulf Samuelsson
b9dc2a4b66
Use correct filename for patch
2008-12-29 15:12:10 +00:00
Peter Korsgaard
cd7245fc11
target/generic: add ttyAMAx device nodes (E.G. for qemu-system-arm)
2008-12-23 14:54:49 +00:00
Ulf Samuelsson
350ced4a71
Add updated gcc-4.2.2 prepatched toolchain for AVR32
2008-12-20 22:27:56 +00:00
Ulf Samuelsson
039ed4b223
Add AP7200 eval kit configuration
2008-12-20 22:26:24 +00:00
Ulf Samuelsson
207503d59e
Add BSP for AP7200
2008-12-20 22:24:11 +00:00
Ulf Samuelsson
736235cb0f
Add support for AT32AP7200
2008-12-20 22:23:15 +00:00
Ulf Samuelsson
c923379e8a
Add 2.6.27.7 patches for AVR32
2008-12-20 22:19:38 +00:00
Ulf Samuelsson
80b526fd3c
Hide AT91 features if not an AT91 ARM
2008-12-20 22:17:52 +00:00
Ulf Samuelsson
1942056ae7
Use correct linux version when applying latest minor patch
2008-12-20 21:45:59 +00:00