configs/raspberrypi0w_defconfig: new defconfig for Raspberry Pi Zero W

Up to now, Raspberry Pi Zero W (rpi0w) could be built with the normal
raspberrypi0_defconfig. However, then you don't have support for the
Bluetooth out-of-the-box, which makes using a W a bit pointless.

Therefore, create a separate defconfig for the W. It is a copy of
raspberrypi0_defconfig with the following changes:
 - Add DT overlays (from rpi-firmware) to support Bluetooth.
 - Pass --add-pi3-miniuart-bt-overlay to post-image.sh.

Since there is now a separate raspberrypi0w_defconfig, the W support
can be removed from raspberrypi0_defconfig.

Signed-off-by: Yves Deweerdt <yves.deweerdt.linux@gmail.com>
[Arnout:
 - Bump to same kernel version as raspberrypi0.
 - Remove redundant comment.
 - Remove redundant default BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y.
 - Improve commit log.
 - Refresh .gitlab-ci.yml.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

.gitlab-ci.yml

@@ -212,6 +212,7 @@ qemu_x86_defconfig: *defconfig
 qemu_xtensa_lx60_defconfig: *defconfig
 qemu_xtensa_lx60_nommu_defconfig: *defconfig
 raspberrypi0_defconfig: *defconfig
+raspberrypi0w_defconfig: *defconfig
 raspberrypi2_defconfig: *defconfig
 raspberrypi3_64_defconfig: *defconfig
 raspberrypi3_defconfig: *defconfig

board/raspberrypi/genimage-raspberrypi0.cfg

@@ -2,7 +2,6 @@ image boot.vfat {
   vfat {
     files = {
       "bcm2708-rpi-b-plus.dtb",
-      "bcm2708-rpi-0-w.dtb",
       "rpi-firmware/bootcode.bin",
       "rpi-firmware/cmdline.txt",
       "rpi-firmware/config.txt",

board/raspberrypi/genimage-raspberrypi0w.cfg

@@ -0,0 +1,31 @@
+image boot.vfat {
+  vfat {
+    files = {
+      "bcm2708-rpi-0-w.dtb",
+      "rpi-firmware/bootcode.bin",
+      "rpi-firmware/cmdline.txt",
+      "rpi-firmware/config.txt",
+      "rpi-firmware/fixup.dat",
+      "rpi-firmware/start.elf",
+      "rpi-firmware/overlays",
+      "zImage"
+    }
+  }
+  size = 32M
+}
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition boot {
+    partition-type = 0xC
+    bootable = "true"
+    image = "boot.vfat"
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext4"
+  }
+}

board/raspberrypi0w

@@ -0,0 +1 @@
+raspberrypi

configs/raspberrypi0_defconfig

@@ -16,7 +16,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 # Build the DTBs for A/B from the kernel sources: the zero is the same
 # as the A+ model, just in a different form-factor
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b-plus bcm2708-rpi-0-w"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b-plus"
 
 BR2_PACKAGE_RPI_FIRMWARE=y
 # BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set

configs/raspberrypi0w_defconfig

@@ -0,0 +1,31 @@
+BR2_arm=y
+BR2_arm1176jzf_s=y
+BR2_ARM_EABIHF=y
+
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="33ee56d5927ceff630fbc87e3f5caa409b6ae114"
+BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-0-w"
+
+BR2_PACKAGE_RPI_FIRMWARE=y
+
+# Required tools to create the SD image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+
+# Filesystem / image
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0w/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0w/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay"