revert bad U-Boot patch
This commit is contained in:
Ulf Samuelsson
parent
5d8956986f
commit
5381e1c486
|
|
@ -18,7 +18,6 @@ source "target/x86/grub/Config.in"
|
|||
#source "target/x86/grub2/Config.in"
|
||||
source "target/x86/syslinux/Config.in"
|
||||
source "target/powerpc/yaboot/Config.in"
|
||||
source "target/device/Atmel/u-boot/Config.in"
|
||||
endmenu
|
||||
|
||||
menu "Kernel"
|
||||
|
|
|
|||
|
|
@ -61,6 +61,7 @@ config BR2_BOARD_PATH
|
|||
|
||||
endmenu
|
||||
|
||||
source "target/device/Atmel/u-boot/Config.in"
|
||||
|
||||
source "target/device/Atmel/DataFlashBoot/Config.in"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,103 +1,44 @@
|
|||
config BR2_TARGET_U_BOOT
|
||||
bool "u-boot"
|
||||
config BR2_TARGET_UBOOT
|
||||
bool "Das U-Boot Boot Monitor"
|
||||
depends on BR2_TARGET_AT91
|
||||
depends on !BR2_TARGET_AT91SAM9260PF
|
||||
default n
|
||||
depends on BR2_avr32 || BR2_arm || BR2_armeb || BR2_i386 || BR2_powerpc || BR2_m68k || BR2_mips || BR2_nios2
|
||||
help
|
||||
U-Boot, the universal boot loader for multiple platforms and target
|
||||
boards.
|
||||
Build "Das U-Boot" Boot Monitor
|
||||
|
||||
http://www.denx.de/wiki/UBoot/
|
||||
|
||||
config BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE
|
||||
string "U-Boot config header file"
|
||||
depends on BR2_TARGET_U_BOOT
|
||||
config BR2_TARGET_UBOOT_SERVERIP
|
||||
string "server ip"
|
||||
depends on BR2_TARGET_UBOOT
|
||||
default "10.175.196.221"
|
||||
help
|
||||
Set this variable to a file containing a U-Boot configuration for the
|
||||
target board. This file will be copied into the U-Boot directory
|
||||
include/configs.
|
||||
TFTP server ip address
|
||||
|
||||
config BR2_TARGET_U_BOOT_CONFIG_BOARD
|
||||
string "U-Boot target board configuration"
|
||||
depends on BR2_TARGET_U_BOOT
|
||||
config BR2_TARGET_UBOOT_IPADDR
|
||||
string "ip address"
|
||||
depends on BR2_TARGET_UBOOT
|
||||
default "10.175.196.18"
|
||||
help
|
||||
Set this variable to the target board you want to configure U-Boot
|
||||
for. This will use the default options for this board in U-Boot and
|
||||
build accordingly.
|
||||
TFTP server ip address
|
||||
|
||||
For example "atstk1002_config" for ATSTK1000 with ATSTK1002 top
|
||||
module for the AVR32 starter kit.
|
||||
|
||||
config BR2_TARGET_U_BOOT_SERVERIP
|
||||
string "Server IP"
|
||||
depends on BR2_TARGET_U_BOOT
|
||||
default "192.168.0.1"
|
||||
config BR2_TARGET_UBOOT_GATEWAY
|
||||
string "gateway ip"
|
||||
depends on BR2_TARGET_UBOOT
|
||||
default "10.175.196.1"
|
||||
help
|
||||
The IP address for the remote server providing TFTP services.
|
||||
Gateway ip address
|
||||
|
||||
config BR2_TARGET_U_BOOT_IPADDR
|
||||
string "Target IP address"
|
||||
depends on BR2_TARGET_U_BOOT
|
||||
default "192.168.0.42"
|
||||
help
|
||||
Target board IP address, only set this if you intend to use a fixed
|
||||
address (i.e. no DHCP). A blanc target IP address will allow the
|
||||
board to use DHCP.
|
||||
|
||||
config BR2_TARGET_U_BOOT_GATEWAY
|
||||
string "Gateway IP"
|
||||
depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != ""
|
||||
default "192.168.0.1"
|
||||
help
|
||||
Set the gateway IP address if you need to connect to a machine
|
||||
outside the netmask for the network.
|
||||
|
||||
config BR2_TARGET_U_BOOT_NETMASK
|
||||
config BR2_TARGET_UBOOT_NETMASK
|
||||
string "netmask"
|
||||
depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != ""
|
||||
depends on BR2_TARGET_UBOOT
|
||||
default "255.255.255.0"
|
||||
help
|
||||
Network mask for the target board network.
|
||||
Network Mask
|
||||
|
||||
config BR2_TARGET_U_BOOT_ETH0ADDR
|
||||
string "Ethernet 0 address"
|
||||
depends on BR2_TARGET_U_BOOT
|
||||
config BR2_TARGET_UBOOT_ETHADDR
|
||||
string "Ethernet address"
|
||||
depends on BR2_TARGET_UBOOT
|
||||
default "04:25:fe:ed:00:18"
|
||||
help
|
||||
Target board MAC address for interface 0. You should have a MAC
|
||||
address range provided by the company who made you MAC hardware.
|
||||
Target ip address, this should be changed for production units
|
||||
|
||||
config BR2_TARGET_U_BOOT_ETH1ADDR
|
||||
string "Ethernet 1 address"
|
||||
depends on BR2_TARGET_U_BOOT
|
||||
help
|
||||
Target board MAC address for interface 1. You should have a MAC
|
||||
address range provided by the company who made you MAC hardware.
|
||||
|
||||
config BR2_TARGET_U_BOOT_BOOTARGS
|
||||
string "Boot arguments"
|
||||
depends on BR2_TARGET_U_BOOT
|
||||
default "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
|
||||
help
|
||||
Set the boot arguments in U-Boot to let it boot the way you prefer by
|
||||
default. Typoes here will result in a non-booting target board.
|
||||
|
||||
Example booting from MMC/SD-card:
|
||||
console=ttyS0 root=/dev/mmcblk0p1
|
||||
|
||||
Example booting from flash devices (NOR, NAND, DataFlash, etc):
|
||||
console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2
|
||||
|
||||
config BR2_TARGET_U_BOOT_BOOTCMD
|
||||
string "Boot command"
|
||||
depends on BR2_TARGET_U_BOOT
|
||||
default "fsload /boot/$(LINUX26_FORMAT); bootm"
|
||||
help
|
||||
Set the boot command in U-Boot which specifies how U-Boot should load
|
||||
your kernel image, or if you want to do other commands automatically
|
||||
when U-Boot starts.
|
||||
|
||||
Loading a kernel from MMC/SD-card:
|
||||
mmcinit; ext2load mmc 0:1 <RAM address>
|
||||
/boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm
|
||||
|
||||
Loading a kernel from flash devices (NOR, NAND, DataFlash, etc):
|
||||
fsload <RAM address> /boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm
|
||||
|
|
|
|||
|
|
@ -0,0 +1,149 @@
|
|||
#############################################################
|
||||
#
|
||||
# U-Boot
|
||||
#
|
||||
#############################################################
|
||||
U_BOOT_VERSION:=1.3.0
|
||||
U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
|
||||
U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
|
||||
U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
|
||||
U_BOOT_CAT:=$(BZCAT)
|
||||
U_BOOT_BIN:=u-boot.bin
|
||||
U_BOOT_TOOLS_BIN:=mkimage
|
||||
|
||||
U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h
|
||||
|
||||
$(DL_DIR)/$(U_BOOT_SOURCE):
|
||||
$(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE)
|
||||
|
||||
$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
|
||||
$(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
|
||||
| tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
|
||||
toolchain/patch-kernel.sh $(U_BOOT_DIR) target/device/Atmel/u-boot/ \
|
||||
u-boot-$(U_BOOT_VERSION)-\*.patch\*
|
||||
touch $@
|
||||
|
||||
$(U_BOOT_DIR)/.header_copied: $(U_BOOT_DIR)/.unpacked
|
||||
ifneq ($(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE),"")
|
||||
@if [ ! -f "$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)" ]; then \
|
||||
echo " You specified BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE,"; \
|
||||
echo " but the file at:"; \
|
||||
echo " '$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)'"; \
|
||||
echo " does not exist."; \
|
||||
echo; \
|
||||
echo " Configure the BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE variable."; \
|
||||
echo; \
|
||||
exit 1; \
|
||||
fi
|
||||
cp -dpf $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
touch $@
|
||||
|
||||
$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied
|
||||
ifeq ($(strip $(BR2_TARGET_U_BOOT_CONFIG_BOARD)),"")
|
||||
@echo
|
||||
@echo " You did not specify a target u-boot config board, so u-boot"
|
||||
@echo " has no way of knowing which board you want to build your"
|
||||
@echo " bootloader for."
|
||||
@echo
|
||||
@echo " Configure the BR2_TARGET_U_BOOT_CONFIG_BOARD variable."
|
||||
@echo
|
||||
@exit 1
|
||||
endif
|
||||
$(TARGET_CONFIGURE_OPTS) \
|
||||
CFLAGS="$(TARGET_CFLAGS)" \
|
||||
LDFLAGS="$(TARGET_LDFLAGS)" \
|
||||
$(MAKE) -C $(U_BOOT_DIR) \
|
||||
$(BR2_TARGET_U_BOOT_CONFIG_BOARD)
|
||||
touch $@
|
||||
|
||||
$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
|
||||
# Modify configuration header in $(U_BOOT_INC_CONF_FILE)
|
||||
@echo >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
|
||||
ifneq ($(strip $(BR2_PROJECT)),"")
|
||||
@echo "#define CONFIG_HOSTNAME" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_HOSTNAME.*,#define CONFIG_HOSTNAME $(subst ",,$(BR2_PROJECT)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_SERVERIP)),"")
|
||||
@echo "#define CONFIG_SERVERIP" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_SERVERIP.*,#define CONFIG_SERVERIP $(subst ",,$(BR2_TARGET_U_BOOT_SERVERIP)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_IPADDR)),"")
|
||||
@echo "#define CONFIG_IPADDR" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_IPADDR.*,#define CONFIG_IPADDR $(subst ",,$(BR2_TARGET_U_BOOT_IPADDR)),' $(U_BOOT_INC_CONF_FILE)
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_GATEWAY)),"")
|
||||
@echo "#define CONFIG_GATEWAYIP" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_GATEWAYIP.*,#define CONFIG_GATEWAYIP $(subst ",,$(BR2_TARGET_U_BOOT_GATEWAY)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_NETMASK)),"")
|
||||
@echo "#define CONFIG_NETMASK" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_NETMASK.*,#define CONFIG_NETMASK $(subst ",,$(BR2_TARGET_U_BOOT_NETMASK)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
endif # end BR2_TARGET_U_BOOT_IPADDR
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH0ADDR)),"")
|
||||
@echo "#define CONFIG_ETHADDR" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_ETHADDR.*,#define CONFIG_ETHADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH0ADDR)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH1ADDR)),"")
|
||||
@echo "#define CONFIG_ETH1ADDR" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_ETH1ADDR.*,#define CONFIG_ETH1ADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH1ADDR)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTARGS)),"")
|
||||
@echo "#undef CONFIG_BOOTARGS" >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo '#define CONFIG_BOOTARGS $(BR2_TARGET_U_BOOT_BOOTARGS)' >> $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTCMD)),"")
|
||||
@echo "#undef CONFIG_BOOTCOMMAND" >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo '#define CONFIG_BOOTCOMMAND $(BR2_TARGET_U_BOOT_BOOTCMD)' >> $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
|
||||
touch $@
|
||||
|
||||
$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
|
||||
$(TARGET_CONFIGURE_OPTS) \
|
||||
CFLAGS="$(TARGET_CFLAGS)" \
|
||||
LDFLAGS="$(TARGET_LDFLAGS)" \
|
||||
$(MAKE) -C $(U_BOOT_DIR)
|
||||
|
||||
$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
|
||||
cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)
|
||||
cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/
|
||||
|
||||
u-boot: gcc $(BINARIES_DIR)/$(U_BOOT_BIN)
|
||||
|
||||
u-boot-clean:
|
||||
$(MAKE) -C $(U_BOOT_DIR) clean
|
||||
|
||||
u-boot-dirclean:
|
||||
rm -rf $(U_BOOT_DIR)
|
||||
|
||||
u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
|
||||
|
||||
#############################################################
|
||||
#
|
||||
# Toplevel Makefile options
|
||||
#
|
||||
#############################################################
|
||||
ifeq ($(strip $(BR2_TARGET_U_BOOT)),y)
|
||||
TARGETS+=u-boot
|
||||
endif
|
||||
|
||||
u-boot-status:
|
||||
@echo
|
||||
@echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE)
|
||||
@echo
|
||||
@echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)
|
||||
@echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
|
||||
@echo BR2_TARGET_U_BOOT_SERVERIP = $(BR2_TARGET_U_BOOT_SERVERIP)
|
||||
@echo BR2_TARGET_U_BOOT_IPADDR = $(BR2_TARGET_U_BOOT_IPADDR)
|
||||
@echo BR2_TARGET_U_BOOT_GATEWAY = $(BR2_TARGET_U_BOOT_GATEWAY)
|
||||
@echo BR2_TARGET_U_BOOT_NETMASK = $(BR2_TARGET_U_BOOT_NETMASK)
|
||||
@echo BR2_TARGET_U_BOOT_ETH0ADDR = $(BR2_TARGET_U_BOOT_ETH0ADDR)
|
||||
@echo BR2_TARGET_U_BOOT_ETH1ADDR = $(BR2_TARGET_U_BOOT_ETH1ADDR)
|
||||
@echo BR2_TARGET_U_BOOT_BOOTARGS = $(BR2_TARGET_U_BOOT_BOOTARGS)
|
||||
@echo BR2_TARGET_U_BOOT_BOOTCMD = $(BR2_TARGET_U_BOOT_BOOTCMD)
|
||||
@echo
|
||||
@exit 0
|
||||
|
|
@ -1,149 +1,282 @@
|
|||
#############################################################
|
||||
#
|
||||
# U-Boot
|
||||
# u-boot mkimage to build to target u-boot filesystems and
|
||||
#
|
||||
# u-boot.bin - the boot loader for the target - which needs soft float, so
|
||||
# we won't make it.
|
||||
#
|
||||
#
|
||||
#############################################################
|
||||
U_BOOT_VERSION:=1.3.0
|
||||
U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
|
||||
U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
|
||||
U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
|
||||
U_BOOT_CAT:=$(BZCAT)
|
||||
U_BOOT_BIN:=u-boot.bin
|
||||
U_BOOT_TOOLS_BIN:=mkimage
|
||||
UBOOT_VERSION:=1.2.0-atmel
|
||||
ATMEL_MIRROR:=$(strip $(subst ",, $(BR2_ATMEL_MIRROR)))
|
||||
#"))
|
||||
UBOOT_DIR:=$(BUILD_DIR)/u-boot-$(UBOOT_VERSION)
|
||||
UBOOT_BUILD_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(UBOOT_VERSION)
|
||||
UBOOT_SOURCE:=u-boot-$(UBOOT_VERSION).tar.bz2
|
||||
#UBOOT_SOURCE:=u-boot-1.1.5-atmel.tar.bz2
|
||||
#UBOOT_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/u-boot
|
||||
UBOOT_SITE:=$(ATMEL_MIRROR)
|
||||
UBOOT_PATCH_SITE:=$(ATMEL_MIRROR)
|
||||
UBOOT_CAT:=$(BZCAT)
|
||||
UBOOT_PATCH_SOURCE:=u-boot-1.2.0-atmel-patch.tar.bz2
|
||||
|
||||
U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h
|
||||
MKIMAGE_BINLOC:=$(UBOOT_BUILD_DIR)/tools/mkimage
|
||||
MKIMAGE:=$(KERNEL_CROSS)mkimage
|
||||
|
||||
$(DL_DIR)/$(U_BOOT_SOURCE):
|
||||
$(WGET) -P $(DL_DIR) $(U_BOOT_SITE)/$(U_BOOT_SOURCE)
|
||||
UBOOT_BIN:=$(BOARD_NAME)-u-boot-$(UBOOT_VERSION)-$(DATE).bin
|
||||
|
||||
$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
|
||||
$(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
|
||||
| tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
|
||||
toolchain/patch-kernel.sh $(U_BOOT_DIR) target/device/Atmel/u-boot/ \
|
||||
u-boot-$(U_BOOT_VERSION)-\*.patch\*
|
||||
UBOOT_PATCHES:=$(PROJECT_BUILD_DIR)/u-boot-patches
|
||||
|
||||
UBOOT_ATMEL_BMP:=$(UBOOT_PATCHES)/atmel.bmp
|
||||
|
||||
UBOOT_SCR=$(BINARIES_DIR)/autoscript
|
||||
TARGET_UBOOT_IPADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_IPADDR)))
|
||||
#"))
|
||||
TARGET_UBOOT_SERVERIP:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_SERVERIP)))
|
||||
#"))
|
||||
TARGET_UBOOT_GATEWAY:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_GATEWAY)))
|
||||
#"))
|
||||
TARGET_UBOOT_NETMASK:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_NETMASK)))
|
||||
#"))
|
||||
TARGET_UBOOT_ETHADDR:=$(strip $(subst ",, $(BR2_TARGET_UBOOT_ETHADDR)))
|
||||
#"))
|
||||
UBOOT_CUSTOM:=$(UBOOT_DIR)/include/custom.h
|
||||
|
||||
$(DL_DIR)/$(UBOOT_SOURCE):
|
||||
$(WGET) -P $(DL_DIR) $(UBOOT_SITE)/$(UBOOT_SOURCE)
|
||||
|
||||
$(DL_DIR)/$(UBOOT_PATCH_SOURCE):
|
||||
$(WGET) -P $(DL_DIR) $(UBOOT_PATCH_SITE)/$(UBOOT_PATCH_SOURCE)
|
||||
|
||||
$(UBOOT_DIR)/.unpacked: $(DL_DIR)/$(UBOOT_SOURCE)
|
||||
mkdir -p $(BUILD_DIR)
|
||||
$(UBOOT_CAT) $(DL_DIR)/$(UBOOT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
|
||||
touch $@
|
||||
|
||||
$(U_BOOT_DIR)/.header_copied: $(U_BOOT_DIR)/.unpacked
|
||||
ifneq ($(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE),"")
|
||||
@if [ ! -f "$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)" ]; then \
|
||||
echo " You specified BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE,"; \
|
||||
echo " but the file at:"; \
|
||||
echo " '$(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)'"; \
|
||||
echo " does not exist."; \
|
||||
echo; \
|
||||
echo " Configure the BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE variable."; \
|
||||
echo; \
|
||||
exit 1; \
|
||||
fi
|
||||
cp -dpf $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE) $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
$(UBOOT_PATCHES)/.unpacked: $(DL_DIR)/$(UBOOT_PATCH_SOURCE)
|
||||
mkdir -p $(UBOOT_PATCHES)
|
||||
bzcat $(DL_DIR)/$(UBOOT_PATCH_SOURCE) | tar -C $(UBOOT_PATCHES) -xvf -
|
||||
touch $@
|
||||
|
||||
$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied
|
||||
ifeq ($(strip $(BR2_TARGET_U_BOOT_CONFIG_BOARD)),"")
|
||||
@echo
|
||||
@echo " You did not specify a target u-boot config board, so u-boot"
|
||||
@echo " has no way of knowing which board you want to build your"
|
||||
@echo " bootloader for."
|
||||
@echo
|
||||
@echo " Configure the BR2_TARGET_U_BOOT_CONFIG_BOARD variable."
|
||||
@echo
|
||||
@exit 1
|
||||
endif
|
||||
$(TARGET_CONFIGURE_OPTS) \
|
||||
CFLAGS="$(TARGET_CFLAGS)" \
|
||||
LDFLAGS="$(TARGET_LDFLAGS)" \
|
||||
$(MAKE) -C $(U_BOOT_DIR) \
|
||||
$(BR2_TARGET_U_BOOT_CONFIG_BOARD)
|
||||
touch $@
|
||||
$(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE): $(UBOOT_DIR)/.unpacked $(UBOOT_PATCHES)/.unpacked
|
||||
toolchain/patch-kernel.sh $(UBOOT_DIR) $(UBOOT_PATCHES) \*.patch
|
||||
touch $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
|
||||
# cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/.
|
||||
# cp $(UBOOT_PATCHES)/cmd_defenv.c $(UBOOT_DIR)/common/.
|
||||
# cp $(UBOOT_ATMEL_BMP) $(UBOOT_DIR)/tools/logos/.
|
||||
|
||||
$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
|
||||
# Modify configuration header in $(U_BOOT_INC_CONF_FILE)
|
||||
@echo >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
|
||||
ifneq ($(strip $(BR2_PROJECT)),"")
|
||||
@echo "#define CONFIG_HOSTNAME" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_HOSTNAME.*,#define CONFIG_HOSTNAME $(subst ",,$(BR2_PROJECT)),' $(U_BOOT_INC_CONF_FILE)
|
||||
$(UBOOT_BUILD_DIR)/.configured: $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
|
||||
ifneq ($(strip $(UBOOT_CONFIG_FILE)),)
|
||||
cp $(UBOOT_CONFIG_FILE) $(UBOOT_DIR)/include/configs/.
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_SERVERIP)),"")
|
||||
@echo "#define CONFIG_SERVERIP" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_SERVERIP.*,#define CONFIG_SERVERIP $(subst ",,$(BR2_TARGET_U_BOOT_SERVERIP)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_IPADDR)),"")
|
||||
@echo "#define CONFIG_IPADDR" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_IPADDR.*,#define CONFIG_IPADDR $(subst ",,$(BR2_TARGET_U_BOOT_IPADDR)),' $(U_BOOT_INC_CONF_FILE)
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_GATEWAY)),"")
|
||||
@echo "#define CONFIG_GATEWAYIP" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_GATEWAYIP.*,#define CONFIG_GATEWAYIP $(subst ",,$(BR2_TARGET_U_BOOT_GATEWAY)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_NETMASK)),"")
|
||||
@echo "#define CONFIG_NETMASK" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_NETMASK.*,#define CONFIG_NETMASK $(subst ",,$(BR2_TARGET_U_BOOT_NETMASK)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
endif # end BR2_TARGET_U_BOOT_IPADDR
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH0ADDR)),"")
|
||||
@echo "#define CONFIG_ETHADDR" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_ETHADDR.*,#define CONFIG_ETHADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH0ADDR)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_ETH1ADDR)),"")
|
||||
@echo "#define CONFIG_ETH1ADDR" >> $(U_BOOT_INC_CONF_FILE)
|
||||
$(SED) 's,^#define.*CONFIG_ETH1ADDR.*,#define CONFIG_ETH1ADDR $(subst ",,$(BR2_TARGET_U_BOOT_ETH1ADDR)),' $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTARGS)),"")
|
||||
@echo "#undef CONFIG_BOOTARGS" >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo '#define CONFIG_BOOTARGS $(BR2_TARGET_U_BOOT_BOOTARGS)' >> $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
ifneq ($(strip $(BR2_TARGET_U_BOOT_BOOTCMD)),"")
|
||||
@echo "#undef CONFIG_BOOTCOMMAND" >> $(U_BOOT_INC_CONF_FILE)
|
||||
@echo '#define CONFIG_BOOTCOMMAND $(BR2_TARGET_U_BOOT_BOOTCMD)' >> $(U_BOOT_INC_CONF_FILE)
|
||||
endif
|
||||
@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
|
||||
touch $@
|
||||
$(MAKE) \
|
||||
O=$(UBOOT_BUILD_DIR) \
|
||||
CONFIG_NOSOFTFLOAT=1 \
|
||||
-C $(UBOOT_DIR) \
|
||||
$(UBOOT_CONFIG)
|
||||
$(SED) 's/ $$(SREC) $$(BIN)//' $(UBOOT_DIR)/examples/Makefile
|
||||
touch $(UBOOT_BUILD_DIR)/.configured
|
||||
# $(MAKE) O=$(UBOOT_BUILD_DIR) -C $(UBOOT_DIR)
|
||||
|
||||
$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
|
||||
$(TARGET_CONFIGURE_OPTS) \
|
||||
CFLAGS="$(TARGET_CFLAGS)" \
|
||||
LDFLAGS="$(TARGET_LDFLAGS)" \
|
||||
$(MAKE) -C $(U_BOOT_DIR)
|
||||
$(MKIMAGE_BINLOC): $(UBOOT_BUILD_DIR)/.configured
|
||||
$(MAKE) \
|
||||
O=$(UBOOT_BUILD_DIR) \
|
||||
CROSS_COMPILE= \
|
||||
CONFIG_NOSOFTFLOAT=1 \
|
||||
TOPDIR=$(UBOOT_DIR) \
|
||||
SRCTREE=$(UBOOT_DIR) \
|
||||
-C $(UBOOT_DIR) tools
|
||||
touch $(MKIMAGE_BINLOC)
|
||||
|
||||
$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
|
||||
cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)
|
||||
cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/
|
||||
$(UBOOT_BUILD_DIR)/u-boot.bin: $(UBOOT_BUILD_DIR)/.configured $(UBOOT_CUSTOM)
|
||||
echo TARGET_CROSS=$(TARGET_CROSS)
|
||||
$(MAKE) O=$(UBOOT_BUILD_DIR) \
|
||||
CROSS_COMPILE=$(TARGET_CROSS) \
|
||||
CONFIG_NOSOFTFLOAT=1 \
|
||||
TOPDIR=$(UBOOT_DIR) \
|
||||
SRCTREE=$(UBOOT_DIR) \
|
||||
TFTPBOOT=/tftpboot \
|
||||
-C $(UBOOT_DIR)
|
||||
|
||||
u-boot: gcc $(BINARIES_DIR)/$(U_BOOT_BIN)
|
||||
$(BINARIES_DIR)/$(UBOOT_BIN): $(UBOOT_BUILD_DIR)/u-boot.bin
|
||||
mkdir -p $(BINARIES_DIR)
|
||||
cp $(UBOOT_BUILD_DIR)/u-boot.bin $(BINARIES_DIR)/$(UBOOT_BIN)
|
||||
|
||||
u-boot-clean:
|
||||
$(MAKE) -C $(U_BOOT_DIR) clean
|
||||
/tftpboot/$(UBOOT_BIN): $(UBOOT_BUILD_DIR)/u-boot.bin
|
||||
mkdir -p /tftpboot
|
||||
cp $(UBOOT_BUILD_DIR)/u-boot.bin /tftpboot/$(UBOOT_BIN)
|
||||
|
||||
u-boot-dirclean:
|
||||
rm -rf $(U_BOOT_DIR)
|
||||
uboot-bin: $(BINARIES_DIR)/$(UBOOT_BIN) /tftpboot/$(UBOOT_BIN)
|
||||
|
||||
u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
|
||||
$(UBOOT_CUSTOM).test: .config $(UBOOT_BUILD_DIR)/.configured
|
||||
echo "/* Automatically generated file, do not edit */" \
|
||||
> $(UBOOT_CUSTOM).test
|
||||
ifneq ($(TARGET_HOSTNAME),)
|
||||
echo "#if defined(CONFIG_HOSTNAME)" >> $(UBOOT_CUSTOM).test
|
||||
echo "#undef CONFIG_HOSTNAME" >> $(UBOOT_CUSTOM).test
|
||||
echo "#define CONFIG_HOSTNAME $(TARGET_HOSTNAME)">> $(UBOOT_CUSTOM).test
|
||||
echo "#endif" >> $(UBOOT_CUSTOM).test
|
||||
endif
|
||||
ifneq ($(TARGET_UBOOT_IPADDR),)
|
||||
echo "#define CONFIG_IPADDR $(TARGET_UBOOT_IPADDR)">> $(UBOOT_CUSTOM).test
|
||||
endif
|
||||
ifneq ($(TARGET_UBOOT_SERVERIP),)
|
||||
echo "#define CONFIG_SERVERIP $(TARGET_UBOOT_SERVERIP)">> $(UBOOT_CUSTOM).test
|
||||
endif
|
||||
ifneq ($(TARGET_UBOOT_GATEWAY),)
|
||||
echo "#define CONFIG_GATEWAYIP $(TARGET_UBOOT_GATEWAY)">> $(UBOOT_CUSTOM).test
|
||||
endif
|
||||
ifneq ($(TARGET_UBOOT_NETMASK),)
|
||||
echo "#define CONFIG_NETMASK $(TARGET_UBOOT_NETMASK)">> $(UBOOT_CUSTOM).test
|
||||
endif
|
||||
ifneq ($(TARGET_UBOOT_ETHADDR),)
|
||||
echo "#define CONFIG_ETHADDR $(TARGET_UBOOT_ETHADDR)">> $(UBOOT_CUSTOM).test
|
||||
endif
|
||||
diff -q $(UBOOT_CUSTOM).test $(UBOOT_CUSTOM) || cp -af $(UBOOT_CUSTOM).test $(UBOOT_CUSTOM)
|
||||
|
||||
$(UBOOT_SCR): .config
|
||||
ifneq ($(TARGET_UBOOT_IPADDR),)
|
||||
echo setenv ipaddr $(TARGET_UBOOT_IPADDR) > $(UBOOT_SCR)
|
||||
endif
|
||||
ifneq ($(TARGET_UBOOT_SERVERIP),)
|
||||
echo setenv serverip $(TARGET_UBOOT_SERVERIP) >> $(UBOOT_SCR)
|
||||
endif
|
||||
ifneq ($(TARGET_UBOOT_GATEWAY),)
|
||||
echo setenv gatewayip $(TARGET_UBOOT_GATEWAY) >> $(UBOOT_SCR)
|
||||
endif
|
||||
ifneq ($(TARGET_UBOOT_NETMASK),)
|
||||
echo setenv netmask $(TARGET_UBOOT_NETMASK) >> $(UBOOT_SCR)
|
||||
endif
|
||||
echo setenv linux $(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE).gz >> $(UBOOT_SCR)
|
||||
echo setenv kernel-version $(LINUX26_VERSION) >> $(UBOOT_SCR)
|
||||
echo setenv kernel-date $(DATE) >> $(UBOOT_SCR)
|
||||
echo setenv hostname $(TARGET_HOSTNAME) >> $(UBOOT_SCR)
|
||||
echo setenv fs-date $(DATE) >> $(UBOOT_SCR)
|
||||
echo setenv rd-1 rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(UBOOT_SCR)
|
||||
echo setenv rd-2 rootfs.$(BR2_ARCH)-$(DATE).jffs2 >> $(UBOOT_SCR)
|
||||
echo setenv rd rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(UBOOT_SCR)
|
||||
echo setenv ver 1 >> $(UBOOT_SCR)
|
||||
ifneq ($(TARGET_UBOOT_ETHADDR),)
|
||||
echo setenv ethaddr $(TARGET_UBOOT_ETHADDR) >> $(UBOOT_SCR)
|
||||
endif
|
||||
echo setenv fstype ram >> $(UBOOT_SCR)
|
||||
echo fs >> $(UBOOT_SCR)
|
||||
echo os >> $(UBOOT_SCR)
|
||||
echo setargs >> $(UBOOT_SCR)
|
||||
echo saveenv >> $(UBOOT_SCR)
|
||||
|
||||
$(UBOOT_SCR).$(PROJECT): $(UBOOT_SCR) $(MKIMAGE)
|
||||
$(MKIMAGE) -A arm \
|
||||
-O linux \
|
||||
-T script \
|
||||
-C none \
|
||||
-a 0 \
|
||||
-e 0 \
|
||||
-n "autoscr config" \
|
||||
-d $(UBOOT_SCR) \
|
||||
$(UBOOT_SCR).$(PROJECT)
|
||||
cp $(UBOOT_SCR).$(PROJECT) /tftpboot
|
||||
|
||||
$(MKIMAGE): $(MKIMAGE_BINLOC)
|
||||
cp -f $(MKIMAGE_BINLOC) $(MKIMAGE)
|
||||
|
||||
uboot: $(MKIMAGE) uboot-bin $(UBOOT_SCR).$(PROJECT)
|
||||
|
||||
uboot-source: $(DL_DIR)/$(UBOOT_SOURCE)
|
||||
|
||||
uboot-clean:
|
||||
rm -fr $(UBOOT_BUILD_DIR)
|
||||
rm -fr $(UBOOT_PATCHES)
|
||||
rm -f $(BINARIES_DIR)/$(UBOOT_BIN)
|
||||
rm -fr $(UBOOT_DIR)
|
||||
rm -f $(UBOOT_SCR)
|
||||
rm -f $(UBOOT_SCR).$(PROJECT)
|
||||
# -$(MAKE) -C $(UBOOT_DIR)/uboot-tools clean
|
||||
|
||||
uboot-dirclean: uboot-clean
|
||||
rm -rf $(UBOOT_DIR)
|
||||
|
||||
uboot-new:
|
||||
rm -fr $(UBOOT_BUILD_DIR)/u-boot
|
||||
rm -fr $(UBOOT_BUILD_DIR)/u-boot.gz
|
||||
rm -fr $(UBOOT_BUILD_DIR)/u-boot.bin
|
||||
rm -fr /tftpboot/$(UBOOT_BIN)
|
||||
rm -fr $(BINARIES_DIR)/$(UBOOT_BIN)
|
||||
|
||||
.PHONY: uboot-bin
|
||||
#############################################################
|
||||
#
|
||||
# Build the uboot root filesystem image
|
||||
#
|
||||
#############################################################
|
||||
|
||||
UBOOT_TARGET:=$(IMAGE).uboot
|
||||
|
||||
ubootroot: host-fakeroot makedevs uboot
|
||||
-@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIPCMD) 2>/dev/null || true
|
||||
@rm -rf $(TARGET_DIR)/usr/man
|
||||
@rm -rf $(TARGET_DIR)/usr/info
|
||||
-/sbin/ldconfig -r $(TARGET_DIR) 2>/dev/null
|
||||
# Use fakeroot to pretend all target binaries are owned by root
|
||||
rm -f $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
|
||||
touch $(STAGING_DIR)/.fakeroot.00000
|
||||
cat $(STAGING_DIR)/.fakeroot* > $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
|
||||
echo "chown -R root:root $(TARGET_DIR)" >> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
|
||||
# Use fakeroot to pretend to create all needed device nodes
|
||||
echo "$(STAGING_DIR)/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
||||
>> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
|
||||
# Use fakeroot so mkuboot believes the previous fakery
|
||||
echo "$(UBOOT_DIR)/uboot-tools/mkuboot " \
|
||||
"$(TARGET_DIR) $(UBOOT_TARGET) " \
|
||||
"-noappend $(UBOOT_ENDIANNESS)" \
|
||||
>> $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
|
||||
chmod a+x $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
|
||||
$(STAGING_DIR)/usr/bin/fakeroot -- $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
|
||||
-@rm -f $(STAGING_DIR)/_fakeroot.$(notdir $(UBOOT_TARGET))
|
||||
|
||||
ubootroot-source: uboot-source
|
||||
|
||||
ubootroot-clean:
|
||||
-$(MAKE) -C $(UBOOT_DIR) clean
|
||||
|
||||
ubootroot-dirclean:
|
||||
rm -rf $(UBOOT_DIR)
|
||||
|
||||
#############################################################
|
||||
#
|
||||
# Toplevel Makefile options
|
||||
#
|
||||
#############################################################
|
||||
ifeq ($(strip $(BR2_TARGET_U_BOOT)),y)
|
||||
TARGETS+=u-boot
|
||||
ifeq ($(strip $(BR2_TARGET_UBOOT)),y)
|
||||
TARGETS+=uboot
|
||||
endif
|
||||
|
||||
u-boot-status:
|
||||
@echo
|
||||
@echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE)
|
||||
@echo
|
||||
@echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)
|
||||
@echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
|
||||
@echo BR2_TARGET_U_BOOT_SERVERIP = $(BR2_TARGET_U_BOOT_SERVERIP)
|
||||
@echo BR2_TARGET_U_BOOT_IPADDR = $(BR2_TARGET_U_BOOT_IPADDR)
|
||||
@echo BR2_TARGET_U_BOOT_GATEWAY = $(BR2_TARGET_U_BOOT_GATEWAY)
|
||||
@echo BR2_TARGET_U_BOOT_NETMASK = $(BR2_TARGET_U_BOOT_NETMASK)
|
||||
@echo BR2_TARGET_U_BOOT_ETH0ADDR = $(BR2_TARGET_U_BOOT_ETH0ADDR)
|
||||
@echo BR2_TARGET_U_BOOT_ETH1ADDR = $(BR2_TARGET_U_BOOT_ETH1ADDR)
|
||||
@echo BR2_TARGET_U_BOOT_BOOTARGS = $(BR2_TARGET_U_BOOT_BOOTARGS)
|
||||
@echo BR2_TARGET_U_BOOT_BOOTCMD = $(BR2_TARGET_U_BOOT_BOOTCMD)
|
||||
@echo
|
||||
@exit 0
|
||||
uboot-test:
|
||||
-@echo source=$(DL_DIR)/$(UBOOT_SOURCE)
|
||||
-@ls $(DL_DIR)/$(UBOOT_SOURCE)
|
||||
-@echo patch=$(DL_DIR)/$(UBOOT_PATCH_SOURCE)
|
||||
-@ls $(DL_DIR)/$(UBOOT_PATCH_SOURCE)
|
||||
-@echo unpacked=$(UBOOT_PATCHES)/.unpacked
|
||||
-@ls $(UBOOT_PATCHES)/.unpacked
|
||||
-@echo patch-unpacked=$(UBOOT_PATCHES)/.unpacked
|
||||
-@ls $(UBOOT_PATCHES)/.unpacked
|
||||
-@echo patched-source=$(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
|
||||
-@ls $(UBOOT_DIR)/.patched.$(UBOOT_PATCH_SOURCE)
|
||||
-@echo configured=$(UBOOT_BUILD_DIR)/.configured
|
||||
-@ls $(UBOOT_BUILD_DIR)/.configured
|
||||
-@echo mkimage=$(MKIMAGE_BINLOC)
|
||||
-@ls $(MKIMAGE_BINLOC)
|
||||
-@echo u-boot.bin=$(UBOOT_BUILD_DIR)/u-boot.bin
|
||||
-@ls $(UBOOT_BUILD_DIR)/u-boot.bin
|
||||
-@echo binaries-u-boot.bin=$(BINARIES_DIR)/$(UBOOT_BIN)
|
||||
-@ls $(BINARIES_DIR)/$(UBOOT_BIN)
|
||||
-@echo tftpboot=/tftpboot/$(UBOOT_BIN)
|
||||
-@ls /tftpboot/$(UBOOT_BIN)
|
||||
-@echo "mkimage = $(MKIMAGE)"
|
||||
-@ls $(MKIMAGE)
|
||||
-@echo "u-boot script=$(UBOOT_SCR).$(PROJECT)"
|
||||
-@ls $(UBOOT_SCR).$(PROJECT)
|
||||
-@echo "u-boot script (ASCII)=$(UBOOT_SCR)"
|
||||
-@ls $(UBOOT_SCR)
|
||||
-@echo "mkimage binary=$(MKIMAGE_BINLOC)"
|
||||
-@ls $(MKIMAGE_BINLOC)
|
||||
|
|
|
|||
Loading…
Reference in New Issue