configs/pc_x86_64_{bios,efi}_defconfig: use custom linux config

Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs
aren't taken into consideration when the qemu defconfigs are updated,
breaking the build.

Instead use a custom linux config for the pc defconfigs.  With this, we also
can get rid of the fragment file containing the delta fra the qemu config.

Created by linux-update-defconfig (after turning of the fragment file).
Also drop the linux kernel version number from the file name as it just
causes extra noise whenever the kernel is bumped.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/pc/linux-extras.config

@@ -1,45 +0,0 @@
-# Filesystem support
-CONFIG_FUSE_FS=y
-CONFIG_SQUASHFS=y
-
-# Ethernet drivers
-CONFIG_ATL2=m
-CONFIG_ATL1=m
-CONFIG_ATL1E=m
-CONFIG_ATL1C=m
-CONFIG_ALX=m
-CONFIG_E100=m
-CONFIG_E1000=m
-CONFIG_E1000E=m
-CONFIG_IGB=m
-CONFIG_R8169=m
-
-# Video drivers
-CONFIG_DRM_I915=y
-CONFIG_FB_VESA=y
-
-# Wireless drivers
-CONFIG_CFG80211=m
-CONFIG_CFG80211_WEXT=y
-CONFIG_MAC80211=m
-CONFIG_ATH_CARDS=m
-CONFIG_ATH9K=m
-CONFIG_ATH9K_HTC=m
-CONFIG_CARL9170=m
-CONFIG_ATH10K=m
-CONFIG_ATH10K_PCI=m
-CONFIG_IWL4965=m
-CONFIG_IWL3945=m
-CONFIG_IWLWIFI=m
-CONFIG_RT2X00=m
-CONFIG_RT2800PCI=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT3573=y
-CONFIG_RT2800USB_RT53XX=y
-CONFIG_RT2800USB_RT55XX=y
-# CONFIG_RTL_CARDS is not set
-CONFIG_RTL8XXXU=m
-
-# EFI support
-CONFIG_EFI=y

board/pc/linux.config

@@ -0,0 +1,84 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SMP=y
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_EFI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETFILTER=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=m
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_ATL2=m
+CONFIG_ATL1=m
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_ALX=m
+CONFIG_E100=m
+CONFIG_E1000=m
+CONFIG_E1000E=m
+CONFIG_IGB=m
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_R8169=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
+CONFIG_IWL4965=m
+CONFIG_IWL3945=m
+CONFIG_IWLWIFI=m
+CONFIG_RT2X00=m
+CONFIG_RT2800PCI=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+# CONFIG_RTL_CARDS is not set
+CONFIG_RTL8XXXU=m
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_DRM=y
+CONFIG_DRM_I915=y
+CONFIG_DRM_QXL=y
+CONFIG_DRM_BOCHS=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_FB_VESA=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_EXT4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_SQUASHFS=y

configs/pc_x86_64_bios_defconfig

@@ -29,8 +29,7 @@ BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.11.config"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 
 # Firmware

configs/pc_x86_64_efi_defconfig

@@ -32,8 +32,7 @@ BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.11.5.config"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 
 # Firmware