sdl2_frt/src/video/kmsdrm/SDL_kmsdrmvideo.c

938 lines
27 KiB
C
Raw Normal View History

/*
Simple DirectMedia Layer
2020-01-17 05:49:25 +01:00
Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
*/
#include "../../SDL_internal.h"
#if SDL_VIDEO_DRIVER_KMSDRM
/* SDL internals */
#include "../SDL_sysvideo.h"
#include "SDL_syswm.h"
#include "SDL_hints.h"
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
#include "../../events/SDL_events_c.h"
#include "../../events/SDL_mouse_c.h"
#include "../../events/SDL_keyboard_c.h"
#ifdef SDL_INPUT_LINUXEV
#include "../../core/linux/SDL_evdev.h"
#endif
/* KMS/DRM declarations */
#include "SDL_kmsdrmvideo.h"
#include "SDL_kmsdrmevents.h"
#include "SDL_kmsdrmopengles.h"
#include "SDL_kmsdrmmouse.h"
#include "SDL_kmsdrmdyn.h"
#include <sys/stat.h>
#include <dirent.h>
#include <errno.h>
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
#include <poll.h>
#define KMSDRM_DRI_PATH "/dev/dri/"
static int
check_modestting(int devindex)
{
SDL_bool available = SDL_FALSE;
char device[512];
int drm_fd;
SDL_snprintf(device, sizeof (device), "%scard%d", KMSDRM_DRI_PATH, devindex);
drm_fd = open(device, O_RDWR | O_CLOEXEC);
if (drm_fd >= 0) {
if (SDL_KMSDRM_LoadSymbols()) {
drmModeRes *resources = KMSDRM_drmModeGetResources(drm_fd);
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (resources) {
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "%scard%d connector, encoder and CRTC counts are: %d %d %d",
KMSDRM_DRI_PATH, devindex,
resources->count_connectors, resources->count_encoders, resources->count_crtcs);
if (resources->count_connectors > 0 && resources->count_encoders > 0 && resources->count_crtcs > 0) {
available = SDL_TRUE;
}
KMSDRM_drmModeFreeResources(resources);
}
SDL_KMSDRM_UnloadSymbols();
}
close(drm_fd);
}
return available;
}
static int get_dricount(void)
{
int devcount = 0;
struct dirent *res;
struct stat sb;
DIR *folder;
if (!(stat(KMSDRM_DRI_PATH, &sb) == 0
&& S_ISDIR(sb.st_mode))) {
printf("The path %s cannot be opened or is not available\n",
KMSDRM_DRI_PATH);
return 0;
}
if (access(KMSDRM_DRI_PATH, F_OK) == -1) {
printf("The path %s cannot be opened\n",
KMSDRM_DRI_PATH);
return 0;
}
folder = opendir(KMSDRM_DRI_PATH);
if (folder) {
while ((res = readdir(folder))) {
int len = SDL_strlen(res->d_name);
2019-06-19 15:40:50 +02:00
if (len > 4 && SDL_strncmp(res->d_name, "card", 4) == 0) {
devcount++;
}
}
closedir(folder);
}
return devcount;
}
static int
get_driindex(void)
{
const int devcount = get_dricount();
int i;
for (i = 0; i < devcount; i++) {
if (check_modestting(i)) {
return i;
}
}
return -ENOENT;
}
static int
KMSDRM_Available(void)
{
int ret = -ENOENT;
ret = get_driindex();
if (ret >= 0)
return 1;
return ret;
}
static void
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_DeleteDevice(SDL_VideoDevice * device)
{
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (device->driverdata) {
SDL_free(device->driverdata);
device->driverdata = NULL;
}
2017-08-02 22:51:14 +02:00
SDL_free(device);
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_KMSDRM_UnloadSymbols();
}
static SDL_VideoDevice *
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_CreateDevice(int devindex)
{
SDL_VideoDevice *device;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_VideoData *viddata;
if (!devindex || (devindex > 99)) {
devindex = get_driindex();
}
if (devindex < 0) {
SDL_SetError("devindex (%d) must be between 0 and 99.\n", devindex);
return NULL;
}
if (!SDL_KMSDRM_LoadSymbols()) {
return NULL;
}
device = (SDL_VideoDevice *) SDL_calloc(1, sizeof(SDL_VideoDevice));
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!device) {
SDL_OutOfMemory();
return NULL;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
viddata = (SDL_VideoData *) SDL_calloc(1, sizeof(SDL_VideoData));
if (!viddata) {
SDL_OutOfMemory();
goto cleanup;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
viddata->devindex = devindex;
viddata->drm_fd = -1;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
device->driverdata = viddata;
Fixed bug 5140 - KMSDRM: Dynamic vsync toggle does not work Manuel Alfayate Corchete The KMSDRM backend was doing things wrong because of some small (but important) misconceptions on how KMS/DRM works: to implement a largely broken non-vsync refresh mechanism, the SwapWindow() function was issuing new pageflips before previous ones had completed, thus causing EBUSY returns, buffer mismanagement, etc... resulting in general breakage on vsync disabling from apps, that would not allow vsync to work again without KMSDRM video re-initialization. To further clarify, on most DRM drivers async pageflips are NOT working nowadays, so all issued pageflips will complete on next VBLANK, NOT ASAP (calling drmModePageFlip() with the DRM_MODE_PAGE_FLIP_ASYNC flag will return error). The old code was assuming that can just issue a synchronous (=on VBLANK) pageflip and then pass a 0 timeout to the pull() function so we do not wait for the pageflip event, thinking that this will lead to correct non-vsynced screen updates from the program: That is plain wrong. Each pageflip has to be waite before issuing a new one, ALWAYS. And if we do not support ASYNC pageflips on the DRM driver level, then we are forced to wait for the next VBLANK. There is no way around it. I have also added many comments on the KMSDRM code. This is needed for future reference for me or others who may need to look at this code: KMS/DRM terminology regarding what SYNC and ASYNC mean in pageflip terms, and where to do certain things and why, is not trivial. It is not desirable or possible to invest time on researching the same concepts every time there is need to dive into this code. So please leave all these comments in the patch.
2020-05-27 01:27:00 +02:00
/* Setup all functions that can be handled from this backend. */
device->VideoInit = KMSDRM_VideoInit;
device->VideoQuit = KMSDRM_VideoQuit;
device->GetDisplayModes = KMSDRM_GetDisplayModes;
device->SetDisplayMode = KMSDRM_SetDisplayMode;
device->CreateSDLWindow = KMSDRM_CreateWindow;
device->CreateSDLWindowFrom = KMSDRM_CreateWindowFrom;
device->SetWindowTitle = KMSDRM_SetWindowTitle;
device->SetWindowIcon = KMSDRM_SetWindowIcon;
device->SetWindowPosition = KMSDRM_SetWindowPosition;
device->SetWindowSize = KMSDRM_SetWindowSize;
device->ShowWindow = KMSDRM_ShowWindow;
device->HideWindow = KMSDRM_HideWindow;
device->RaiseWindow = KMSDRM_RaiseWindow;
device->MaximizeWindow = KMSDRM_MaximizeWindow;
device->MinimizeWindow = KMSDRM_MinimizeWindow;
device->RestoreWindow = KMSDRM_RestoreWindow;
device->SetWindowGrab = KMSDRM_SetWindowGrab;
device->DestroyWindow = KMSDRM_DestroyWindow;
device->GetWindowWMInfo = KMSDRM_GetWindowWMInfo;
#if SDL_VIDEO_OPENGL_EGL
device->GL_LoadLibrary = KMSDRM_GLES_LoadLibrary;
device->GL_GetProcAddress = KMSDRM_GLES_GetProcAddress;
device->GL_UnloadLibrary = KMSDRM_GLES_UnloadLibrary;
device->GL_CreateContext = KMSDRM_GLES_CreateContext;
device->GL_MakeCurrent = KMSDRM_GLES_MakeCurrent;
device->GL_SetSwapInterval = KMSDRM_GLES_SetSwapInterval;
device->GL_GetSwapInterval = KMSDRM_GLES_GetSwapInterval;
device->GL_SwapWindow = KMSDRM_GLES_SwapWindow;
device->GL_DeleteContext = KMSDRM_GLES_DeleteContext;
#endif
device->PumpEvents = KMSDRM_PumpEvents;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
device->free = KMSDRM_DeleteDevice;
return device;
cleanup:
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (device)
SDL_free(device);
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (viddata)
SDL_free(viddata);
return NULL;
}
VideoBootStrap KMSDRM_bootstrap = {
"KMSDRM",
"KMS/DRM Video Driver",
KMSDRM_Available,
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_CreateDevice
};
static void
KMSDRM_FBDestroyCallback(struct gbm_bo *bo, void *data)
{
KMSDRM_FBInfo *fb_info = (KMSDRM_FBInfo *)data;
if (fb_info && fb_info->drm_fd >= 0 && fb_info->fb_id != 0) {
KMSDRM_drmModeRmFB(fb_info->drm_fd, fb_info->fb_id);
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Delete DRM FB %u", fb_info->fb_id);
}
SDL_free(fb_info);
}
KMSDRM_FBInfo *
KMSDRM_FBFromBO(_THIS, struct gbm_bo *bo)
{
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_VideoData *viddata = ((SDL_VideoData *)_this->driverdata);
unsigned w,h;
int ret;
Uint32 stride, handle;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Check for an existing framebuffer */
KMSDRM_FBInfo *fb_info = (KMSDRM_FBInfo *)KMSDRM_gbm_bo_get_user_data(bo);
if (fb_info) {
return fb_info;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Create a structure that contains enough info to remove the framebuffer
when the backing buffer is destroyed */
fb_info = (KMSDRM_FBInfo *)SDL_calloc(1, sizeof(KMSDRM_FBInfo));
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!fb_info) {
SDL_OutOfMemory();
return NULL;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
fb_info->drm_fd = viddata->drm_fd;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Create framebuffer object for the buffer */
w = KMSDRM_gbm_bo_get_width(bo);
h = KMSDRM_gbm_bo_get_height(bo);
stride = KMSDRM_gbm_bo_get_stride(bo);
handle = KMSDRM_gbm_bo_get_handle(bo).u32;
ret = KMSDRM_drmModeAddFB(viddata->drm_fd, w, h, 24, 32, stride, handle,
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
&fb_info->fb_id);
if (ret) {
SDL_free(fb_info);
return NULL;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "New DRM FB (%u): %ux%u, stride %u from BO %p",
fb_info->fb_id, w, h, stride, (void *)bo);
/* Associate our DRM framebuffer with this buffer object */
KMSDRM_gbm_bo_set_user_data(bo, fb_info, KMSDRM_FBDestroyCallback);
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
return fb_info;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
static void
KMSDRM_FlipHandler(int fd, unsigned int frame, unsigned int sec, unsigned int usec, void *data)
{
Fixed bug 5140 - KMSDRM: Dynamic vsync toggle does not work Manuel Alfayate Corchete The KMSDRM backend was doing things wrong because of some small (but important) misconceptions on how KMS/DRM works: to implement a largely broken non-vsync refresh mechanism, the SwapWindow() function was issuing new pageflips before previous ones had completed, thus causing EBUSY returns, buffer mismanagement, etc... resulting in general breakage on vsync disabling from apps, that would not allow vsync to work again without KMSDRM video re-initialization. To further clarify, on most DRM drivers async pageflips are NOT working nowadays, so all issued pageflips will complete on next VBLANK, NOT ASAP (calling drmModePageFlip() with the DRM_MODE_PAGE_FLIP_ASYNC flag will return error). The old code was assuming that can just issue a synchronous (=on VBLANK) pageflip and then pass a 0 timeout to the pull() function so we do not wait for the pageflip event, thinking that this will lead to correct non-vsynced screen updates from the program: That is plain wrong. Each pageflip has to be waite before issuing a new one, ALWAYS. And if we do not support ASYNC pageflips on the DRM driver level, then we are forced to wait for the next VBLANK. There is no way around it. I have also added many comments on the KMSDRM code. This is needed for future reference for me or others who may need to look at this code: KMS/DRM terminology regarding what SYNC and ASYNC mean in pageflip terms, and where to do certain things and why, is not trivial. It is not desirable or possible to invest time on researching the same concepts every time there is need to dive into this code. So please leave all these comments in the patch.
2020-05-27 01:27:00 +02:00
/* If the data pointer received here is the same passed as the user_data in drmModePageFlip()
then this is the event handler for the pageflip that was issued on drmPageFlip(): got here
because of that precise page flip, the while loop gets broken here because of the right event.
This knowledge will allow handling different issued pageflips if sometime in the future
managing different CRTCs in SDL2 is needed, for example (synchronous pageflips happen on vblank
and vblank is a CRTC thing). */
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
*((SDL_bool *) data) = SDL_FALSE;
}
SDL_bool
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_WaitPageFlip(_THIS, SDL_WindowData *windata, int timeout) {
SDL_VideoData *viddata = ((SDL_VideoData *)_this->driverdata);
drmEventContext ev = {0};
struct pollfd pfd = {0};
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
ev.version = DRM_EVENT_CONTEXT_VERSION;
ev.page_flip_handler = KMSDRM_FlipHandler;
pfd.fd = viddata->drm_fd;
pfd.events = POLLIN;
while (windata->waiting_for_flip) {
pfd.revents = 0;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (poll(&pfd, 1, timeout) < 0) {
SDL_LogError(SDL_LOG_CATEGORY_VIDEO, "DRM poll error");
return SDL_FALSE;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (pfd.revents & (POLLHUP | POLLERR)) {
SDL_LogError(SDL_LOG_CATEGORY_VIDEO, "DRM poll hup or error");
return SDL_FALSE;
}
Fixed bug 5140 - KMSDRM: Dynamic vsync toggle does not work Manuel Alfayate Corchete The KMSDRM backend was doing things wrong because of some small (but important) misconceptions on how KMS/DRM works: to implement a largely broken non-vsync refresh mechanism, the SwapWindow() function was issuing new pageflips before previous ones had completed, thus causing EBUSY returns, buffer mismanagement, etc... resulting in general breakage on vsync disabling from apps, that would not allow vsync to work again without KMSDRM video re-initialization. To further clarify, on most DRM drivers async pageflips are NOT working nowadays, so all issued pageflips will complete on next VBLANK, NOT ASAP (calling drmModePageFlip() with the DRM_MODE_PAGE_FLIP_ASYNC flag will return error). The old code was assuming that can just issue a synchronous (=on VBLANK) pageflip and then pass a 0 timeout to the pull() function so we do not wait for the pageflip event, thinking that this will lead to correct non-vsynced screen updates from the program: That is plain wrong. Each pageflip has to be waite before issuing a new one, ALWAYS. And if we do not support ASYNC pageflips on the DRM driver level, then we are forced to wait for the next VBLANK. There is no way around it. I have also added many comments on the KMSDRM code. This is needed for future reference for me or others who may need to look at this code: KMS/DRM terminology regarding what SYNC and ASYNC mean in pageflip terms, and where to do certain things and why, is not trivial. It is not desirable or possible to invest time on researching the same concepts every time there is need to dive into this code. So please leave all these comments in the patch.
2020-05-27 01:27:00 +02:00
/* Is the fd readable? Thats enough to call drmHandleEvent() on it. */
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (pfd.revents & POLLIN) {
Fixed bug 5140 - KMSDRM: Dynamic vsync toggle does not work Manuel Alfayate Corchete The KMSDRM backend was doing things wrong because of some small (but important) misconceptions on how KMS/DRM works: to implement a largely broken non-vsync refresh mechanism, the SwapWindow() function was issuing new pageflips before previous ones had completed, thus causing EBUSY returns, buffer mismanagement, etc... resulting in general breakage on vsync disabling from apps, that would not allow vsync to work again without KMSDRM video re-initialization. To further clarify, on most DRM drivers async pageflips are NOT working nowadays, so all issued pageflips will complete on next VBLANK, NOT ASAP (calling drmModePageFlip() with the DRM_MODE_PAGE_FLIP_ASYNC flag will return error). The old code was assuming that can just issue a synchronous (=on VBLANK) pageflip and then pass a 0 timeout to the pull() function so we do not wait for the pageflip event, thinking that this will lead to correct non-vsynced screen updates from the program: That is plain wrong. Each pageflip has to be waite before issuing a new one, ALWAYS. And if we do not support ASYNC pageflips on the DRM driver level, then we are forced to wait for the next VBLANK. There is no way around it. I have also added many comments on the KMSDRM code. This is needed for future reference for me or others who may need to look at this code: KMS/DRM terminology regarding what SYNC and ASYNC mean in pageflip terms, and where to do certain things and why, is not trivial. It is not desirable or possible to invest time on researching the same concepts every time there is need to dive into this code. So please leave all these comments in the patch.
2020-05-27 01:27:00 +02:00
/* Page flip? ONLY if the event that made the fd readable (=POLLIN state)
is a page flip, will drmHandleEvent call page_flip_handler, which will break the loop.
The drmHandleEvent() and subsequent page_flip_handler calls are both synchronous (blocking),
nothing runs on a different thread, so no need to protect waiting_for_flip access with mutexes. */
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_drmHandleEvent(viddata->drm_fd, &ev);
} else {
/* Timed out and page flip didn't happen */
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Dropping frame while waiting_for_flip");
return SDL_FALSE;
}
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
return SDL_TRUE;
}
/*****************************************************************************/
/* SDL Video and Display initialization/handling functions */
/* _this is a SDL_VideoDevice * */
/*****************************************************************************/
static void
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_DestroySurfaces(_THIS, SDL_Window * window)
{
SDL_WindowData *windata = (SDL_WindowData *)window->driverdata;
KMSDRM_WaitPageFlip(_this, windata, -1);
if (windata->curr_bo) {
KMSDRM_gbm_surface_release_buffer(windata->gs, windata->curr_bo);
windata->curr_bo = NULL;
}
if (windata->next_bo) {
KMSDRM_gbm_surface_release_buffer(windata->gs, windata->next_bo);
windata->next_bo = NULL;
}
#if SDL_VIDEO_OPENGL_EGL
SDL_EGL_MakeCurrent(_this, EGL_NO_SURFACE, EGL_NO_CONTEXT);
if (windata->egl_surface != EGL_NO_SURFACE) {
SDL_EGL_DestroySurface(_this, windata->egl_surface);
windata->egl_surface = EGL_NO_SURFACE;
}
#endif
if (windata->gs) {
KMSDRM_gbm_surface_destroy(windata->gs);
windata->gs = NULL;
}
}
int
KMSDRM_CreateSurfaces(_THIS, SDL_Window * window)
{
SDL_VideoData *viddata = ((SDL_VideoData *)_this->driverdata);
SDL_WindowData *windata = (SDL_WindowData *)window->driverdata;
SDL_DisplayData *dispdata = (SDL_DisplayData *) SDL_GetDisplayForWindow(window)->driverdata;
Uint32 width = dispdata->mode.hdisplay;
Uint32 height = dispdata->mode.vdisplay;
Uint32 surface_fmt = GBM_FORMAT_XRGB8888;
Uint32 surface_flags = GBM_BO_USE_SCANOUT | GBM_BO_USE_RENDERING;
#if SDL_VIDEO_OPENGL_EGL
EGLContext egl_context;
#endif
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!KMSDRM_gbm_device_is_format_supported(viddata->gbm, surface_fmt, surface_flags)) {
SDL_LogWarn(SDL_LOG_CATEGORY_VIDEO, "GBM surface format not supported. Trying anyway.");
}
#if SDL_VIDEO_OPENGL_EGL
SDL_EGL_SetRequiredVisualId(_this, surface_fmt);
egl_context = (EGLContext)SDL_GL_GetCurrentContext();
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
#endif
KMSDRM_DestroySurfaces(_this, window);
windata->gs = KMSDRM_gbm_surface_create(viddata->gbm, width, height, surface_fmt, surface_flags);
if (!windata->gs) {
return SDL_SetError("Could not create GBM surface");
}
#if SDL_VIDEO_OPENGL_EGL
windata->egl_surface = SDL_EGL_CreateSurface(_this, (NativeWindowType)windata->gs);
if (windata->egl_surface == EGL_NO_SURFACE) {
return SDL_SetError("Could not create EGL window surface");
}
SDL_EGL_MakeCurrent(_this, windata->egl_surface, egl_context);
windata->egl_surface_dirty = 0;
#endif
return 0;
}
int
KMSDRM_VideoInit(_THIS)
{
int ret = 0;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_VideoData *viddata = ((SDL_VideoData *)_this->driverdata);
SDL_DisplayData *dispdata = NULL;
drmModeRes *resources = NULL;
drmModeEncoder *encoder = NULL;
char devname[32];
SDL_VideoDisplay display = {0};
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
dispdata = (SDL_DisplayData *) SDL_calloc(1, sizeof(SDL_DisplayData));
if (!dispdata) {
return SDL_OutOfMemory();
}
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "KMSDRM_VideoInit()");
/* Open /dev/dri/cardNN */
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_snprintf(devname, sizeof(devname), "/dev/dri/card%d", viddata->devindex);
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Opening device %s", devname);
viddata->drm_fd = open(devname, O_RDWR | O_CLOEXEC);
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (viddata->drm_fd < 0) {
ret = SDL_SetError("Could not open %s", devname);
goto cleanup;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Opened DRM FD (%d)", viddata->drm_fd);
viddata->gbm = KMSDRM_gbm_create_device(viddata->drm_fd);
if (!viddata->gbm) {
ret = SDL_SetError("Couldn't create gbm device.");
goto cleanup;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Get all of the available connectors / devices / crtcs */
resources = KMSDRM_drmModeGetResources(viddata->drm_fd);
if (!resources) {
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
ret = SDL_SetError("drmModeGetResources(%d) failed", viddata->drm_fd);
goto cleanup;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
for (int i = 0; i < resources->count_connectors; i++) {
drmModeConnector *conn = KMSDRM_drmModeGetConnector(viddata->drm_fd, resources->connectors[i]);
if (!conn) {
continue;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (conn->connection == DRM_MODE_CONNECTED && conn->count_modes) {
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Found connector %d with %d modes.",
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
conn->connector_id, conn->count_modes);
dispdata->conn = conn;
break;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_drmModeFreeConnector(conn);
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!dispdata->conn) {
ret = SDL_SetError("No currently active connector found.");
goto cleanup;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Try to find the connector's current encoder */
for (int i = 0; i < resources->count_encoders; i++) {
encoder = KMSDRM_drmModeGetEncoder(viddata->drm_fd, resources->encoders[i]);
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!encoder) {
continue;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (encoder->encoder_id == dispdata->conn->encoder_id) {
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Found encoder %d.", encoder->encoder_id);
break;
}
KMSDRM_drmModeFreeEncoder(encoder);
encoder = NULL;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!encoder) {
/* No encoder was connected, find the first supported one */
for (int i = 0, j; i < resources->count_encoders; i++) {
encoder = KMSDRM_drmModeGetEncoder(viddata->drm_fd, resources->encoders[i]);
if (!encoder) {
continue;
}
for (j = 0; j < dispdata->conn->count_encoders; j++) {
if (dispdata->conn->encoders[j] == encoder->encoder_id) {
break;
}
}
if (j != dispdata->conn->count_encoders) {
break;
}
KMSDRM_drmModeFreeEncoder(encoder);
encoder = NULL;
}
}
if (!encoder) {
ret = SDL_SetError("No connected encoder found.");
goto cleanup;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Found encoder %d.", encoder->encoder_id);
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Try to find a CRTC connected to this encoder */
dispdata->saved_crtc = KMSDRM_drmModeGetCrtc(viddata->drm_fd, encoder->crtc_id);
if (!dispdata->saved_crtc) {
/* No CRTC was connected, find the first CRTC that can be connected */
for (int i = 0; i < resources->count_crtcs; i++) {
if (encoder->possible_crtcs & (1 << i)) {
encoder->crtc_id = resources->crtcs[i];
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
dispdata->saved_crtc = KMSDRM_drmModeGetCrtc(viddata->drm_fd, encoder->crtc_id);
break;
}
}
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!dispdata->saved_crtc) {
ret = SDL_SetError("No CRTC found.");
goto cleanup;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Saved crtc_id %u, fb_id %u, (%u,%u), %ux%u",
dispdata->saved_crtc->crtc_id, dispdata->saved_crtc->buffer_id, dispdata->saved_crtc->x,
dispdata->saved_crtc->y, dispdata->saved_crtc->width, dispdata->saved_crtc->height);
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
dispdata->crtc_id = encoder->crtc_id;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Figure out the default mode to be set. If the current CRTC's mode isn't
valid, select the first mode supported by the connector
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
FIXME find first mode that specifies DRM_MODE_TYPE_PREFERRED */
dispdata->mode = dispdata->saved_crtc->mode;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (dispdata->saved_crtc->mode_valid == 0) {
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO,
"Current mode is invalid, selecting connector's mode #0.");
dispdata->mode = dispdata->conn->modes[0];
}
/* Setup the single display that's available */
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
display.desktop_mode.w = dispdata->mode.hdisplay;
display.desktop_mode.h = dispdata->mode.vdisplay;
display.desktop_mode.refresh_rate = dispdata->mode.vrefresh;
#if 1
display.desktop_mode.format = SDL_PIXELFORMAT_ARGB8888;
#else
/* FIXME */
drmModeFB *fb = drmModeGetFB(viddata->drm_fd, dispdata->saved_crtc->buffer_id);
display.desktop_mode.format = drmToSDLPixelFormat(fb->bpp, fb->depth);
drmModeFreeFB(fb);
#endif
display.current_mode = display.desktop_mode;
display.driverdata = dispdata;
SDL_AddVideoDisplay(&display);
#ifdef SDL_INPUT_LINUXEV
SDL_EVDEV_Init();
#endif
KMSDRM_InitMouse(_this);
return ret;
cleanup:
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (encoder)
KMSDRM_drmModeFreeEncoder(encoder);
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (resources)
KMSDRM_drmModeFreeResources(resources);
if (ret != 0) {
/* Error (complete) cleanup */
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (dispdata->conn) {
KMSDRM_drmModeFreeConnector(dispdata->conn);
dispdata->conn = NULL;
}
if (dispdata->saved_crtc) {
KMSDRM_drmModeFreeCrtc(dispdata->saved_crtc);
dispdata->saved_crtc = NULL;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (viddata->gbm) {
KMSDRM_gbm_device_destroy(viddata->gbm);
viddata->gbm = NULL;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (viddata->drm_fd >= 0) {
close(viddata->drm_fd);
viddata->drm_fd = -1;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_free(dispdata);
}
return ret;
}
void
KMSDRM_VideoQuit(_THIS)
{
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_VideoData *viddata = ((SDL_VideoData *)_this->driverdata);
SDL_DisplayData *dispdata = (SDL_DisplayData *)SDL_GetDisplayDriverData(0);
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "KMSDRM_VideoQuit()");
if (_this->gl_config.driver_loaded) {
SDL_GL_UnloadLibrary();
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Clear out the window list */
SDL_free(viddata->windows);
viddata->windows = NULL;
viddata->max_windows = 0;
viddata->num_windows = 0;
/* Restore saved CRTC settings */
if (viddata->drm_fd >= 0 && dispdata && dispdata->conn && dispdata->saved_crtc) {
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
drmModeConnector *conn = dispdata->conn;
drmModeCrtc *crtc = dispdata->saved_crtc;
int ret = KMSDRM_drmModeSetCrtc(viddata->drm_fd, crtc->crtc_id, crtc->buffer_id,
crtc->x, crtc->y, &conn->connector_id, 1, &crtc->mode);
if (ret != 0) {
SDL_LogWarn(SDL_LOG_CATEGORY_VIDEO, "Could not restore original CRTC mode");
}
}
if (dispdata && dispdata->conn) {
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_drmModeFreeConnector(dispdata->conn);
dispdata->conn = NULL;
}
if (dispdata && dispdata->saved_crtc) {
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_drmModeFreeCrtc(dispdata->saved_crtc);
dispdata->saved_crtc = NULL;
}
if (viddata->gbm) {
KMSDRM_gbm_device_destroy(viddata->gbm);
viddata->gbm = NULL;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (viddata->drm_fd >= 0) {
close(viddata->drm_fd);
SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Closed DRM FD %d", viddata->drm_fd);
viddata->drm_fd = -1;
}
#ifdef SDL_INPUT_LINUXEV
SDL_EVDEV_Quit();
#endif
}
void
KMSDRM_GetDisplayModes(_THIS, SDL_VideoDisplay * display)
{
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_DisplayData *dispdata = display->driverdata;
drmModeConnector *conn = dispdata->conn;
SDL_DisplayMode mode;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
for (int i = 0; i < conn->count_modes; i++) {
SDL_DisplayModeData *modedata = SDL_calloc(1, sizeof(SDL_DisplayModeData));
if (modedata) {
modedata->mode_index = i;
}
mode.w = conn->modes[i].hdisplay;
mode.h = conn->modes[i].vdisplay;
mode.refresh_rate = conn->modes[i].vrefresh;
mode.format = SDL_PIXELFORMAT_ARGB8888;
mode.driverdata = modedata;
if (!SDL_AddDisplayMode(display, &mode)) {
SDL_free(modedata);
}
}
}
int
KMSDRM_SetDisplayMode(_THIS, SDL_VideoDisplay * display, SDL_DisplayMode * mode)
{
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_VideoData *viddata = (SDL_VideoData *)_this->driverdata;
SDL_DisplayData *dispdata = (SDL_DisplayData *)display->driverdata;
SDL_DisplayModeData *modedata = (SDL_DisplayModeData *)mode->driverdata;
drmModeConnector *conn = dispdata->conn;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!modedata) {
return SDL_SetError("Mode doesn't have an associated index");
}
dispdata->mode = conn->modes[modedata->mode_index];
for (int i = 0; i < viddata->num_windows; i++) {
SDL_Window *window = viddata->windows[i];
SDL_WindowData *windata = (SDL_WindowData *)window->driverdata;
#if SDL_VIDEO_OPENGL_EGL
/* Can't recreate EGL surfaces right now, need to wait until SwapWindow
so the correct thread-local surface and context state are available */
windata->egl_surface_dirty = 1;
#else
if (KMSDRM_CreateSurfaces(_this, window)) {
return -1;
}
#endif
/* Tell app about the resize */
SDL_SendWindowEvent(window, SDL_WINDOWEVENT_RESIZED, mode->w, mode->h);
}
return 0;
}
int
KMSDRM_CreateWindow(_THIS, SDL_Window * window)
{
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_VideoData *viddata = (SDL_VideoData *)_this->driverdata;
SDL_WindowData *windata;
SDL_VideoDisplay *display;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
#if SDL_VIDEO_OPENGL_EGL
if (!_this->egl_data) {
if (SDL_GL_LoadLibrary(NULL) < 0) {
goto error;
}
}
#endif
/* Allocate window internal data */
windata = (SDL_WindowData *)SDL_calloc(1, sizeof(SDL_WindowData));
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!windata) {
SDL_OutOfMemory();
goto error;
}
/* Windows have one size for now */
display = SDL_GetDisplayForWindow(window);
window->w = display->desktop_mode.w;
window->h = display->desktop_mode.h;
/* Maybe you didn't ask for a fullscreen OpenGL window, but that's what you get */
window->flags |= (SDL_WINDOW_FULLSCREEN | SDL_WINDOW_OPENGL);
Fixed bug 5140 - KMSDRM: Dynamic vsync toggle does not work Manuel Alfayate Corchete The KMSDRM backend was doing things wrong because of some small (but important) misconceptions on how KMS/DRM works: to implement a largely broken non-vsync refresh mechanism, the SwapWindow() function was issuing new pageflips before previous ones had completed, thus causing EBUSY returns, buffer mismanagement, etc... resulting in general breakage on vsync disabling from apps, that would not allow vsync to work again without KMSDRM video re-initialization. To further clarify, on most DRM drivers async pageflips are NOT working nowadays, so all issued pageflips will complete on next VBLANK, NOT ASAP (calling drmModePageFlip() with the DRM_MODE_PAGE_FLIP_ASYNC flag will return error). The old code was assuming that can just issue a synchronous (=on VBLANK) pageflip and then pass a 0 timeout to the pull() function so we do not wait for the pageflip event, thinking that this will lead to correct non-vsynced screen updates from the program: That is plain wrong. Each pageflip has to be waite before issuing a new one, ALWAYS. And if we do not support ASYNC pageflips on the DRM driver level, then we are forced to wait for the next VBLANK. There is no way around it. I have also added many comments on the KMSDRM code. This is needed for future reference for me or others who may need to look at this code: KMS/DRM terminology regarding what SYNC and ASYNC mean in pageflip terms, and where to do certain things and why, is not trivial. It is not desirable or possible to invest time on researching the same concepts every time there is need to dive into this code. So please leave all these comments in the patch.
2020-05-27 01:27:00 +02:00
/* In case low-latency is wanted, double-buffered video will be used. We take note here */
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
windata->double_buffer = SDL_FALSE;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (SDL_GetHintBoolean(SDL_HINT_VIDEO_DOUBLE_BUFFER, SDL_FALSE)) {
windata->double_buffer = SDL_TRUE;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Setup driver data for this window */
window->driverdata = windata;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (KMSDRM_CreateSurfaces(_this, window)) {
goto error;
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
/* Add window to the internal list of tracked windows. Note, while it may
seem odd to support multiple fullscreen windows, some apps create an
extra window as a dummy surface when working with multiple contexts */
windata->viddata = viddata;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (viddata->num_windows >= viddata->max_windows) {
int new_max_windows = viddata->max_windows + 1;
viddata->windows = (SDL_Window **)SDL_realloc(viddata->windows,
new_max_windows * sizeof(SDL_Window *));
viddata->max_windows = new_max_windows;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!viddata->windows) {
SDL_OutOfMemory();
goto error;
}
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
viddata->windows[viddata->num_windows++] = window;
/* Focus on the newly created window */
SDL_SetMouseFocus(window);
SDL_SetKeyboardFocus(window);
return 0;
error:
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_DestroyWindow(_this, window);
return -1;
}
void
KMSDRM_DestroyWindow(_THIS, SDL_Window * window)
{
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
SDL_WindowData *windata = (SDL_WindowData *) window->driverdata;
SDL_VideoData *viddata;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
if (!windata) {
return;
}
/* Remove from the internal window list */
viddata = windata->viddata;
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
for (int i = 0; i < viddata->num_windows; i++) {
if (viddata->windows[i] == window) {
viddata->num_windows--;
for (int j = i; j < viddata->num_windows; j++) {
viddata->windows[j] = viddata->windows[j + 1];
}
break;
}
}
Fixed bug 4966 - KMSDRM: Add dynamic modeset support Anthony Pesch * Remove triple buffering support. As far as I can tell, this goes against the libdrm API; the EGL implementations themselves control the buffering. Removing it isn't absolutely necessary as it seemingly works on the Pi at least, but I noticed this while doing my work and explained my reasoning in the commit. * Replace the crtc_ready logic which allocates an extra bo to perform the initial CRTC configuration (which is required before calling drmModePageFlip) with a call to drmModeSetCrtc after the front and back buffers are allocated, avoiding this allocation. * Standardized the SDL_*Data variable names and null checks to improve readability. Given that there were duplicate fields in each SDL_*Data structure, having generic names such as "data" at times was very confusing. * Removed unused fields from the SDL_*Data structures and moves all display related fields out of SDL_VideoData and into SDL_DisplayData. Not required since the code only supports a single display right now, but this was helpful in reading and understanding the code initially. * Implement KMSDRM_GetDisplayModes / KMSDRM_SetDisplayMode to provide dynamic modeset support. These changes have been tested on a Raspberry Pi 4 and a Dell XPS laptop with an HD 520. As an update, I went back over the triple buffer changes and left them in. I didn't entirely get the code originally, I had just seen it calling KMSDRM_gbm_surface_lock_front_buffer twice for a single swap and had removed it because I was paranoid of bugs stemming from it while working on the modeset changes. I've made a few small changes to the logic that had thrown me off originally and rebased the changes: * The condition wrapping the call to release buffer was incorrect. * The first call to KMSDRM_gbm_surface_lock_front_buffer has been removed. I don't understand why it existed. * Added additional comments describing what was going on in the code (as it does fix the buffer release pattern of the original code before it).
2020-02-09 20:44:22 +01:00
KMSDRM_DestroySurfaces(_this, window);
window->driverdata = NULL;
SDL_free(windata);
}
int
KMSDRM_CreateWindowFrom(_THIS, SDL_Window * window, const void *data)
{
return -1;
}
void
KMSDRM_SetWindowTitle(_THIS, SDL_Window * window)
{
}
void
KMSDRM_SetWindowIcon(_THIS, SDL_Window * window, SDL_Surface * icon)
{
}
void
KMSDRM_SetWindowPosition(_THIS, SDL_Window * window)
{
}
void
KMSDRM_SetWindowSize(_THIS, SDL_Window * window)
{
}
void
KMSDRM_ShowWindow(_THIS, SDL_Window * window)
{
}
void
KMSDRM_HideWindow(_THIS, SDL_Window * window)
{
}
void
KMSDRM_RaiseWindow(_THIS, SDL_Window * window)
{
}
void
KMSDRM_MaximizeWindow(_THIS, SDL_Window * window)
{
}
void
KMSDRM_MinimizeWindow(_THIS, SDL_Window * window)
{
}
void
KMSDRM_RestoreWindow(_THIS, SDL_Window * window)
{
}
void
KMSDRM_SetWindowGrab(_THIS, SDL_Window * window, SDL_bool grabbed)
{
}
/*****************************************************************************/
/* SDL Window Manager function */
/*****************************************************************************/
SDL_bool
KMSDRM_GetWindowWMInfo(_THIS, SDL_Window * window, struct SDL_SysWMinfo *info)
{
if (info->version.major <= SDL_MAJOR_VERSION) {
return SDL_TRUE;
} else {
SDL_SetError("application not compiled with SDL %d.%d\n",
SDL_MAJOR_VERSION, SDL_MINOR_VERSION);
return SDL_FALSE;
}
/* Failed to get window manager information */
return SDL_FALSE;
}
#endif /* SDL_VIDEO_DRIVER_KMSDRM */
/* vi: set ts=4 sw=4 expandtab: */